similar to: FW: Solid-PBX

Ok here is one for you. I know we all do the this for 911: exten => _911,1,Dial(Zap/1/911) exten => _9911,1,Dial(Zap/1/911) And this probably is more then acceptable for most of us. However I have a system setup that uses SIP for most calls and 1 POTS line. We use a "least cost" routing that uses the POTS line for local calls AND SIP when appropiate. What I want to do is

This is a follow/find me script that I can't quite get to work, asterisk wont save forward/${calleridnum} to AstDB... any comments or thoughts on how to make this work or change it to work differently are appreciated. The voice prompts to go with all playback/background extensions are commented appropriately. I hope this code is of use to some of you and any help with a perfected

Hello List, The main issue is server selection regarding PCI bus connectivity for Asterisk solutions. Most offerings on HP Proliants, something I've been looking into, include PCI-X and/or PCI-e expansion slots. I know PCI-e is totally different from PCI and PCI-X so, for now, that's not an issue. However, regarding PCI and PCI-X, and after googling for a while and checking wikipedia

Hello. Has anybody knows how run two asterisk process in one hardware? (each one with its own configuration?) Thanks Juan Salas.

I've been working with Asterisk for a little while now, and have been looking recently at my next career opportunity. It seems from searching the various job sites that the predominant VOIP technology is not the applications-based open source approach we took, but Cisco, with a really heavy emphasis on the networking (ie network engineer) aspect. If you do a job search for (VOIP or

[root@asterisk zaptel]# modprobe ztdummy WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.315/misc/zaptel.ko): Invalid module format WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.315/misc/zaptel.ko): Invalid module format FATAL: Error inserting ztdummy (/lib/modules/2.6.5-1.315/misc/ztdummy.ko): Invalid module format FATAL: Error running install command for ztdummy [root@asterisk

Apologies if any of these have already been fixed in the working version Page 6 third and fourth lines from the bottom "Digium is the solely capable" should read "Digium is solely capable" -- Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org Security Admin | Summit Open Source Development Group | www.sosdg.org Key At

Hello, I have installed GlusterFS one month ago, and replication have many issues : First of all, our infrastructure, 2 storage array of 8Tb in replication mode... We have our backups file on this arrays, so 6Tb of datas. I want replicate datas on the second storrage array, so, i use this command : # gluster volume rebalance REP_SVG migrate-data start And gluster start to replicate, in 2 weeks

Hi, I have debug off (debug level 0) why are the following lines showing up in '/var/log/asterisk/full' Mar 31 06:56:19 DEBUG[2423] chan_sip.c: Stopping retransmission on '765e20595817e9897b77cff23f821cc5@10.0.0.254' of Request 102: Match Found Mar 31 06:56:19 DEBUG[2423] chan_sip.c: Stopping retransmission on '4858cde16223cc0716e325921a8a0654@10.0.0.254' of Request

I am currently running Asterisk 1.2.8, on an AMD Sempron 3100+ (ASUS K8N Nforce based board). I am using a Digium wctdm24xxp to terminate 8 (2x quad) FXO lines. Using ztmonitor (From zapata) I cannot see that there is any registerable incoming volume from these lines. I've been running them at rxgain = 25 (zapata.conf) to make the audio audible, however this creates poor call quality issues

This patch exports to userspace the boot loader ID which has been exported by (b)zImage boot loaders since boot protocol version 2. Tested on i386 and x86-64; as far as I know those are the only architectures which use zImage/bzImage format. -hpa Signed-Off-By: H. Peter Anvin <hpa at zytor.com>

Dear R-experts, Sorry if I've overlooked a simple solution here. I have calculated a proportion of the number of observations which meet a criteria, applied to five years of data. How can I break down this proportion statistic for each year? For example (data in zoo format): open high low close hc lc 2004-12-29 4135 4135 4106 4116 8 -21 2004-12-30 4120 4131

Hi, all I am a pabx vendor from Singapore. Recently we are going to implement a failover solution for our customers using heartbeat, the asterisk server can failover perfectly, however the g729 codec canot work, because it is binded the mac address, we have bought two set of licenses, can you provide us some workaround for this scenario? Regards, Liangliang

We upgraded to 2.2.6rc2 yesterday to continue our resolving of the printer driver problems. (Thanks Jerry & Rohin) For unrelated reasons I wanted to log into the machine late last night and found Putty couldn't connect. When I get in this morning the server was completely hooped with Out of Memory errors on the screen with SMBD as the offending process. Trying to log into any console

I need to set up a site to charge cards through LinkPoint. I did some searching to see what was available, and saw that Shopify uses ActiveMerchant. I saw that it hasn''t been touched in several months, though perhaps that''s simply because it hasn''t needed any changes. Just wondering what''s the best way to go about this. Thanks for any info. Pat

Plz help me. My Q:I want solid help on how to undelete files in ext3 fs?How can I? Plz help me with full concepts with debug_fs or any other way to undel ? regards, pranav

I have been all over the wiki pages for puppet and I have noticed that all the configuration examples seem vague. Does anyone know of a good solid resource for start to finish configuration of puppetmaster and puppet (server and client)? A step by step guide would be great.

kernel: 2.6.37.6 At least twice I''ve experienced problems when using btrfs with ssd for postgresql db storage. Server gets frozen, i even can''t kill it using kill -9, I cant chown postgresql db dir (it never gets done). If I initiate copy operation of postgresql db dir to another partition (without actually switching to using it) everything starts to work fine for some time...

Hi, I try to install Solid Edge 7.0 (one CAD prg), but wine give alway: "trace:file:CreateFileA D:\Setup.exe GENERIC_READ FILE_SHARE_READ OPEN_EXISTING trace:file:CreateFileA C:\WINDOWS\_delis32.ini GENERIC_READ FILE_SHARE_READ OPEN_EXISTING warn:file:CreateFileA Unable to get full filename from 'C:\WINDOWS\_delis32.ini'(GLE2) err:win:WIN_FindWndPtr window 10022 belongs to other

From: Marcin Slusarz <marcin.slusarz at gmail.com> after this change nouveau passes all fill and blend tests of rendercheck (before: fill - 108/120, blend - 3323868/3569150) tested on NV34 Signed-off-by: Marcin Slusarz <marcin.slusarz at gmail.com> --- src/nv04_exa.c | 19 +++++++++---------- src/nv_accel_common.c | 5 ++++- 2 files changed, 13 insertions(+), 11