similar to: DTMF detection when outgoing call to mobile phones

Yes I can hear the DTMF keys. I ve tried 2 different phones and 3 different mobile network providers. Nothing. I played with the rx/txgain values from hearing nothing to too loud... I have no more ideas. Marc -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Steve Underwood Gesendet: Donnerstag, 4.

Actually I am using Asterisk 1.2.7.1, zaptel 1.2.5, libpri 1.2.2 I ve tried many values for rx/txgain togeher with echocancel and relaxdtmf. The detection is not working with call file, manager originate and not with the dial command to the mobile. I have no ideas left. I got it sometimes to work if I use a specific channel (i.e. Dial(ZAP/14/...) But with the same vaules on a second call there

Hi *, now for a long time i am trying to set the outgoing callerid, without luck. I am here in Germany, my asterisk has a pri interface connected to a PMX installed by Telekom. All telephone calls are preselected to EcoVoice. I am using asterisk 1.2.7.1, zaptel 1.2.5 and libpri 1.2.2. A week ago we tried with a device able to simulate a telephone system so send out a callerid, and that

Is there anyone successfully using the TE410P with a German "PMX-Anschluss"? Please just drop me a note mentioning the carrier you use. We are having problems making the card work, although configuration is correct (Posted this before). Our carrier blames the card for this. We would just need some evidence that it really works. Thanks, Henrik -------------- next part

Hello David, ----- Nachricht von David Pottage via dovecot <dovecot at dovecot.org> --------- Datum: Thu, 21 Feb 2019 13:58:14 +0000 Von: David Pottage via dovecot <dovecot at dovecot.org> Antwort an: David Pottage <david at chrestomanci.org> Betreff: Re: Virus scan + removal on a mdbox mail storage An: dovecot at dovecot.org [...] >> NO! My

I am talking about the SIP. Now the new mobiles (Nokia, Erecson, Panasonic, iPot, ... etc) all of them support SIP capability. They are able to register to any SIP server (by giving the IP address, username and password). Fring is one of the software that can be installed on the mobile devices and can register on the SIP servers. BUT, the new mobiles currently come with built in SIP (no need to

Dear all i have a TE205P connected to an Asterisk 1.2.18. Yes i know, the version is old but since now the system was stable and i don't have the necessity of an upgrade. The system provide an IVR service that: 1) receive the call 2) verify the queue length 3) hangup if queue length is > 1 4) put the call in the queue othervise Then, there is an AGI php script that 1) verify the queue

Hi all, I am having problems to get the SeaLevel IO card to work with CentOS distro. Basically the card is being recognised and shown by lspci BUT /proc/devices file is not updated with the new devices does anyone know why. ? Could someone tell me what/where infos are needed to get /proc/devices to be updated. The reason I require the /proc/devices infos is because I want to run a mknod

Hi all, I've setup a PBX in production environment last week but we have immediatly find out drop conversations and lot of errors (in asterisk logs) like: Apr 10 17:30:48 NOTICE[25154] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 My configuration is: Motherboard: SuperMicro P8SCT (Intel E7221 chipset) Hypertrading and APIC enabled CPU: P4 3GHz Digium TE205P

Trying to find my feet here. If I wanted to connect Asterisk to a PRI and throw in a T1 Adtran channel bank into the mix for fax machines would the following work? Connect PRI line from telco to Port 1 on the Digium Wildcard TE205P. Connect Adtran TA-624-T1 to Post 2 on the Digium Wildcard TE205P also, would I need a crossover to the channelbank or is it a patch lead like the connection to the

Hi ..., I've a TE205P card installed in my asterisk box.Port 1 of my card is connected to service provider.From port 2 I want to connect Avay Partner system. what type of cable I require to connect the partner system (straight/cross over). How the call routing from outside will be done to epbx. Thanks inadvance regards rudra -------------- next part -------------- An HTML attachment

I am having a issues with adding a analog card to my dell 2800. I already have a t1 card installed and running fine but when I install the analog card asterisk will not start (ztcfg fails). I have determined it is because of a IRQ problem and have decided to get a new server. Can anyone suggest a server grade setup that supports this? I would rather not buy a machine that will be unstable. I

Hey folks, I have a Digium TE205P working as a man in the middle: PRI line -------- Asterisk/TE205P -------- PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm

Hi i have a PRI connected to a TE205P. Actually, can i send and receive FAX through Asterisk using stable solutions? Or shall i connect an ATA to Asterisk and then a modem with Hylafax? -- /*************/ nik600 https://sourceforge.net/projects/ccmanager https://sourceforge.net/projects/nikstresser

I have recently installed Asterisk Now Beta 4 (32-bit) with three Digium cards - 2 Wildcards TE400P (one with 4 FXS modules and one with 4 FXO modules) and a TE205P dual E1/T1 card. The problem is with the TE205P and configuring the /etc/zaptel.conf and /etc/asterisk/zapata.conf files. I go in and add the required lines to configure the TE205P and restart Asterisk. All is fine until I reboot the

Hello, Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot. http://www.voip-info.org/wiki/view/Asterisk+hardware We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.

Nik, I'm not sure that "NOP" is correct, but I'm in the states so I'll to defer to someone who knows E1/PRI. When I run zttool I have "OK" under the alarms. Is there a way you can call the telco and confirm the settings? Make sure that framing, coding and D channels are set up on their end the same way you're set up. As for asterisk, here's what I get

On 2019-02-21 22:14, Christoph Haas via dovecot wrote: >>> NO! My mail storage is mdbox. And at the moment I have no intention >>> to >>> convert it to Maildir! >> Could I ask why? maildir is a better storage format is almost every >> respect. > > well, I have a mailbox with about 50k emails ..., so one reason seems > to me better backup

Hello David, ----- Nachricht von David Pottage via dovecot <dovecot at dovecot.org> --------- Datum: Wed, 20 Feb 2019 14:56:51 +0000 Von: David Pottage via dovecot <dovecot at dovecot.org> Antwort an: David Pottage <david at chrestomanci.org> Betreff: Re: Virus scan + removal on a mdbox mail storage An: dovecot at dovecot.org > On 2019-02-20