similar to: Vodini & *

I had my asterisk server working fine with FWD as a SIP provider, so I now added a second SIP provider (voctel). The addition to my sip.conf file is almost identical to FWD, however, asterisk now generates lots of debug messages for some strange reason! In particular, the line "##### Testing 127.0.0.1 with 172.31.0.0" shows up every two seconds! (See my log below). If I comment out

I used the "FreePBX on Debian" HowTo at http://powerontech.com/freepbx-on-debian.htm to install. I use callfiles to initiate calls to my SIP carrier. They get my registration, but they see that my call is interrupted before they can complete the connection. My Asterisk log shows that the call times out after the time (45s) specified in my dialplan Dial() command. What is wrong? [from

I'm seeing a number of these logged in "full" while my * system is idle, but I haven't found a good description of what they mean. Can someone oblige? I have a single SIP phone registered and an IAX trunk. Chris Sep 19 22:13:44 DEBUG[18720]: (Provisional) Stopping retransmission (but retaining packet) on '5a20449945beda9461709aae24f8bd8e@216.27.40.102' Request 732:

Hi, I'm using the Perl AGI interface for a prepaid card platform. And sometimes (almost twice an hour), asterisk doesn't detect a call has been hung up. The call is so hung up when the time limit for the call is reached (the corresponding prepaid card is then emptied ...). I've tried to look in the asterisk log files to find anything suspect with these calls, and I've found a

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

Hello, I'm using Asterisk@Home. I'm still new to Asterisk, and trying to grasp it all. I'm wanting to do a simple setup of One SIP provider (Broadvoice) and 3 SIP Software Phones. I'm able to call the VoIP provided line fine and get dropped to the digital receptionist (or mailbox). However, when I try to send outbound calls I get "Error 503 Service Unavailable" and

Hi all, I have recently installed Asterisk@home and outbound calling is working great. However I am strugglings with inbound calls. I have setup a trunk for my provider, voipfone and in the inbound area on AMP I have the following :- user context name = 3011XXXX context=from-pstn dtmfmode=rfc2283 fromdomain=voipfone.co.uk host=voipfone.co.uk insecure=very secret=XXXXXX type=user user=3011XXXX

Good day everyone, I have Asterisk and Mitel 3300 ICP communicating via SIP. Calls to and from extensions on both sides are completing successfully (details on config coming soon). Problem is that calls from Asterisk to PSTN via E1 on Mitel 3300 ICP are rejected. What do I need to do to get Asterisk to route PSTN calls through it successfully? Here is an extract of the log on Asterisk whenever I

Hello, Can somebody please assist me with my problem. Currently I am using a Asterisk@HOme version 2.4 with a TE406P digium card. One the E1 is connected to a telco switch via an ISDN. May issue is that may incoming calls in the zap channels gets disconnected or release after 1 ring. I really dont know what setting should I change to increase the timeout of the ring. I have even tried upgrading

I am hoping some of you can help me troubleshoot this problem I am having with my home asterisk machine. I have incoming POTS service using a SPA-3000 (extension 119). Calls on that line go to an attendant recording that offers a menu choice: press 1 for Nancy, press 2 for the rest of us. In reality, pressing anything other than 1 sends the call to the rest of us by dialing both extensions 101

I cant seem to be able to figure this out. As much as I can tell it is a codec problem. I can dial out to 612@fwd.pulver.com and the "Call Me" test there rings my phone. However when the callee endpoint answers, there is a failure to translate: Outgoing Call for 612 612 is not a local user -- Called 612@fwdpulvercom No path to translate from SIP/fwdpulvercom-dd5a(2) to

Hi, I am running a build of asterisk@home with asterisk 1.2beta1 and am trying to diagnose RxFax with a Voip incoming trunk. I am running the latest spandsp and rxfax with libtiff 3.7. Switching on debug IU can see the call come in, but after a small time the fax connection drops and the sending fax (paper doc ) has not moved in the machine. I guess it must be dropping in the negotiation

Apparently we've been having calls sporadically drop. We're using an IAX outbound trunk and SIP adapters on the inside. Below is a log excerpt detailing one of the calls which dropped, and it looks largely normal to me except for this: Jan 5 13:31:07 DEBUG[3776] channel.c: Didn't get a frame from channel: IAX2/teliax-2 Jan 5 13:31:07 DEBUG[3776] channel.c: Bridge stops bridging

Well, I'm writing yet another queue_log analyser program in PHP, and I have noticed the following entry in my queue_log file from today: 1104796626|1104796618.532|queue|NONE|ENTERQUEUE||no 1104796664|1104796618.532|queue|NONE|EXITWITHTIMEOUT|1 So, pretty sure that I didn't make someone wait 30 minutes in my queue. extensions.conf snippet: [remote-oldnum] exten => s,1,Answer exten =>

Hi, I have two local SIP extensions (both bt100). One is on remote location behind another nat (16), but everyithing seems to be setup correctly as it can register and is listed as OK(57ms). However I can only call in one direction between those two. Extensions are defined in same context: exten => 11,1,Macro(oneline,SIP/11) exten => 16,1,Macro(oneline,SIP/16) both using same macro

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

It seems consistant after dialing dozens of times that the call that doesn't go through is the one the gets the log message "No echocancellation requested" (chan_zap.c) and the "Scheduleing timer" (channel.c) in the middle of receiving the DTMF tones. I'm now using the T400P card last week very simular problems the the T100P (although I think I was actually loosing

Hi, Does any one experience that SIP phone to SIP phone (Polycom phone) calls can't hear each other, but Monitor application records both end's voices. It also happens in group pickup calls. Zap calls to queue (Local channel) also experience this problem (sometimes, our SIP phone can't hear any voice from incoming Zap calls when pickup, sometimes this happens after 10-50

I'm using Asterisk 1.0.4 with AMP and Broad Voice. I have that with only 5 XTen Lite phones. I'm able to call / etc with internal phones just fine. I can call outside Vonage Numbers, and other BroadVoice Numbers. I have vonage where I live (626) and can call that fine. However, other 626 numbers I get similar errors as below. However, everytime, I try to call cell phones, and or

Hi, I have 2 systems (A and B). I have an 800 number... when someone calls the 800 number it goes: IAX2-->A---IAX---B--->SIP PHONE However.. if the user calling the 800 number is a SIP user that is registered to A it goes: SIP--->A---IAX---B--->SIP PHONE This is the problem... when a call comes in from the IAX2 800 provider, things work fine... however if a SIP user registered to