similar to: (Semi-OT) QoS Question FTP Living with Asterisk

Some at 5:34 pm EST DAILY, all my call get disconnect. I tried RE-INSTALLATION, I tried Reinstallation on a virgin HDD, but its same. I tried changing VOIP provider I tried changing Internet Provider..But no help.. What could be the reason ? Here are my enties of crontab : ### recording mixing/compressing/ftping scripts 0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * *

I'm trying to figure out how to handle our fax line when we switch to our asterisk for voice. After a lot of reading and poking about I have concluded, as have many others it would seem, that the best thing to do is either to have a separate pstn fax line or use some sort of internet faxing service rather than try and make faxing work in a way it's not meant to over voip lines.

I have successfully set up a very nice kickstart install with the i386 version of CentOS 4.3 and it works great. I am using a custom kickstart script and the kernel and initrd from disc1/images. But when I try to duplicate this for a 64 bit setup (changing paths in my tftp server, ks.cfg, etc to point to the 64 bit stuff) it successfully tftp's everything just as it should (tethereal

Searching the archives there has been some discussion about the need for QOS routing on a mixed voice data broadband like ADSL. Has anyone run * on a production system with voice and data. Can anyone share what has to be done to secure the voice and throttle back the data? If a linux router is need can that run on the * box to reduce cost? All help is gratefully received, so I can plan a

Saw an ad in the latest Linux Journal for Sangoma's FXO/FXS analog cards. it was part of an ad for a reseller. I can't find anything on the resellers site or Sangoma's site either. Did the ad jump the gun or someting? Is this for real? Paul -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC paul@dugas.cc phone: 404-932-1355 522 Black Canyon Park

Been using a few different FXO interfaces (X100P, Voicetronix, and SPA-3000) at a couple sites and they've all run into nasty issues at times. I'm looking at moving one of my offices and am in the market for a solution for connecting 4 FXOs. I got excited about recent offerings from Digium and Sangoma in the way of new cards but I hear they're causing troubles for more than a few.

This is a wierd one. Can't figure it out. I have an SPA-3000 at the house handling my incoming line. It's setup to direct the incoming call to asterisk. Works great 99% of the time. A few times a day, I'm getting calls that ring once internally and are then hungup. I managed to get a detailed log [1] of what's happening today and it looks to me that the SPA is acting wierd.

I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though. My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver

How can I efficiently search for programs and packages that are available as part of the CentOs4.3 distribution? I am using CentOs4.3 and need to install packages that are apparently not part of this distribution. What RedHat version do I have to consider if I want to use rpm's for RedHat instead? Dirk

Got a wierd one that's reminding me of a problem mentioned in an earlier post but for the life of me, I can't find it. So... Inbound calls via a Voicetronix interface on my Asterisk box are being properly detected and routed to my dialplan as expected. It's a simple plan right now that rings a few internal Voicetronix and SIP stations. When the inbound line rings, it's ringing

New to asterisk so please be gentle. I'm guessing I'm among a number of recent additions to the list after the article in Linux Mag. I gotta say I'm *very* intersted in the project and will be doing lots of reading shortly. A couble quick questions first... How suitable is Asterisk for use as an IVR providing callers with textual data out of a database? Can it be combined easily

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller

I need to install libMrm.so.3 on my computer that has Centos4.3. However, I am not experienced with Centos4.3 so far. I do not know where to find this library for Centos4.3 and how to install it. Is there something like apt? Using system-config-packages I cannot find any intelligent way to search for programs and package. Dirk

While setting my first couple IP phones, I set their voicemail buttons to an extension that runs VoicemailMain. exten => 8500,1,Wait(1) ; voicemail exten => 8500,2,VoicemailMain ; exten => 8500,3,Hangup ; I would like to be able to pass the mailbox number allowing each phone to go in directly but I'd rather tno have

Hi all, Anyone got any VoIP traffic shaping rules for m0n0wall that they could let me look at please? Thanks -- Mark, G7LTT/KC2ENI Randolph, NJ http://www.g7ltt.com

Am I doing something wrong here? GOt a SPC-841 the other day and have it registering properly. Can place and recive calls as expected but when on the phone, a second call is immediately dumped to "busy" voicemail. Does this thing not support call-waiting? Or, have I just got my configs wrong? Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com

Running * CVS with a SPA-841 (0.9.5) and can't seem to get the message waiting light to come on automatically. There is a control in the web interface to turn it on and off (seems rather curious to me but whatever). Has anybody got an idea as to where I may be going awry? TIA, Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian

I've got a context in my dialplan like so but pressing 0 doesn't seem to be working. Instead of dropping out to the "o" extension, it's just returning to the start of the direcotry app. Same with star. Anyone see where I've gone awry? [attendant] ; <snip> exten => *,1,NoOp(Attendant: Directory) exten => *,n,Directory(default,attendant,eb)

I've got hints setup for my MeetMe conferences like so: exten => _60X,hint,MeetMe:${EXTEN} and they show up in "core show hints" like so 600 at dialtone : MeetMe:600 State:Unavailable Watchers 1 _60X at dialtone : MeetMe:${EXTEN} State:Unavailable Watchers 0 I'm wondering why they're Unavailable instead of

Alle, Has anyone gotten Zimbra to work on an installation of CentOS4.3, x86_64 architecture? I have tried to install the RHEL4 3.1.4 32-bit version with the following error: Found zimbra-core Error: attempting to install i386 packages on a x86_64 OS. Exiting... Shouldn't this work with 32-bit compat? I've also tried to install RHEL4_64 4.0.0.RC1 but post installation fails when