similar to: RE: SOLVED: No audio when dialing in via PRI with Q.SIG

After lots of testing I discovered that I could get the sound to work. The only thing I had been testing was MeetMe and Voicemail. But when I dialed a SIP-phone, or routed back to other phones via the PRI interface, everything works just great! The problem only seem to occur when dialing directly into Asterisk, when Asterisk sends the audio output. I have also discovered that the PRI never seem to

I've been trying lots of configurations now. And the problem that I can't solve is this: I have a Digium T205P card. I have connected one of the connections to our internal PBX (NEC 2000 IPS). The Asterisk is configured as pri_cpe, and the NEC is configured to be the network side of the connection. Both ends are using b-channels 1-15 and 17-31, the d-channel is on 16. When I start

Add an Answer() as your first step in your dialplan and see if that help. snip

Hi, I'm using samba in RedHat Linux 5.0. It works almost ok... First of all, I think everything is MUCH to slow. I am running it on a Pentium Pro 200MHz with 64Mb RAM. And there is only 5 clients using it. I'm using version 1.8.19p3 on an RedHat 5.0 Server. Is there something special I need to do about the filelocking?? Or have I just done something wrong during setup...? Before this

Hello, if somebody using this scenario in production successfully, please send me info, which ISDN card for asterisk server is usefull for me (Digium, Sangoma)? my crucial requirement is "caller id name" transfer/display between ISDN (Siemens PBX) and IP phone connected to asterisk I'm using PRI interface and Q.SIG signaling. thank you PJ

Hello, I am using a Cisco-2,811 as a gateway between the Asterisk PBX and our Nortel TX-1 university's PBX. It is working but no names are exchanged. From the debug mode I see that the Cisco sends the display name (which does not appear on the Nortel's phones) and the Nortel does not bother to send it at all. I recall that when I had a pilot with Cisco CCM two years ago we had to set

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

I think that Robert Olssons post never made it through the filters... ---------- Forwarded message ---------- Date: Fri, 2 Jun 2006 12:32:53 +0200 From: Robert Olsson <Robert.Olsson@data.slu.se> To: Jesper Dangaard Brouer <hawk@diku.dk> Cc: Andreas John <lists@aj.net-lab.net>, Robert Olsson <Robert.Olsson@data.slu.se>, lartc@mailman.ds9a.nl Subject: Re: [LARTC] Linux

hi, it'd be useul if the centosplus and contrib directory can contain a small readme file or some kind of documentaion about the rpm inside. currently there is not any kind of such docs (ok johnny send a description about the kernel rpms, but if someone missed that email). eg the postfix rpm has the same description and changelog inside the rpm as the original ones. if someone just look into

I have compiled openssh for sun solaris 2.6, no errors When I try to run SSHD daemon it says the following error. This platform does not support both privilege separation and compression Compression disabled Privilege separation user sshd does not exist Any one that have answer to this problem mail me on daniel.d.olsson at telia.se <mailto:daniel.d.olsson at telia.se> //Daniel

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have Rh7.3 installed, with samba server 2.2.2 Does anyone now how to prevent windoze users from changing password from the client. All clients are in the domain. I have read in the list that many others having problem with the opposite, the problem is that i dont know what parameter i should change. i have tried almost everything thanks in

Hi, I need to know from your experience which is the minimum hardware configuration (proc./memory) to run * with two X100P cards and around 10 internal IP phones (from which 4 are hardware ones and use G.711, the rest of them with GSM), with a couple of IAX connections with other Asterisk PBX'es (GSM too). Have someone tried to build a graph about the dependencies between hardware

Ok, I'll post all the messages on the screen. -----Ursprungligt meddelande----- Fr?n: H. Peter Anvin [mailto:hpa at zytor.com] Skickat: fr 2003-05-30 22:21 Till: Olsson Lars Kopia: syslinux at zytor.com ?mne: Re: [syslinux] Problems with PXELINUX 2.05pre1 Olsson Lars wrote: > Reading config based on hw address is really what we need, so we quickly > downloaded

Dear Ola, I cannot say anything about Windows 7, as we do not have any Win7 machines here in our institute and I even do not know someone who have Win7 on a private machine. I will try to find a machine with this OS and test it. Anybody having experiences with Win7 yet? Greetings Jo > -------- Original Message -------- > Subject: [R] snowfall on Win7 > Date: Tue, 15 Dec 2009 11:25:37

Dear R helpers, running the following code of a glm model of the family poisson, gives predicted values < 0. Why? library(MASS) library(stats) library(mvtnorm) library(pscl) data(bioChemists) poisson_glm <- glm(art ~ fem + mar + kid5 + phd + ment, data = bioChemists, family = poisson) predicted.values = predict(poisson_glm) range(predicted.values) Thank you in advance for any hints.

Thank you so much all for your invaluable inputs. On Sat, Jun 4, 2011 at 3:36 AM, Patrick Burns <patrick at burns-stat.com> wrote: > A common thing to do is the Ljung-Box > test on the residuals. ?For garch it > would be the residuals squared. > > Actually for garch it should be the > rank of the squared residuals -- see >

dear All, I had a Centos 5.5 OS running for about 6 months used as a Xen VM server prfectly running 3 Virtual machines Its a Sun Blade server with 8 core Xeon Proceesor with 32 GB Ram couple of days back I added another 32 gb ram . The bios shows the added ram that is now it shows me 64 GB but the Centos OS just recognizes 32gb only the OS details are: Centos release 5.5 final Kernel

Hello I try to compile openssh-3.5 on Solaris 2.6 with gcc-3.2. configure and make is no problem but when i do make install following error comes out mkdir /opt/openssh/etc ssh-rand-helper: Cannot find ELF ssh-rand-helper child produced insufficient data ssh-rand-helper: Cannot find ELF ssh-rand-helper child produced insufficient data ssh-rand-helper: Cannot find ELF ssh-rand-helper child

Hi! Is it possible to override in OpenSSH so that the shell specified in the /etc/passwd (or what comes from the LDAP server) is not executed at login? We have na?vely tried to specify this with subsystem but found out that by default the ssh client does not specify any subsystem. So how to override something that is unset from the client? /John -- John Olsson Ericsson AB BSC/BSS System

Hi, A question regarding chroot, internal-sftp, and time zones: Is it possible to get the time stamps presented by the chrooted internal-sftp to always be aligned with the system global time zone setting? What is the reason this not done by default, that is couldn't the chrooted internal-sftp inherit the time zone information from the SSH daemon? /John -- John Olsson Ericsson AB