similar to: Kernel panic - suggestions?

Running fc3 with current cvs-head... Is there a nice way to rotate the /var/log/asterisk/messages file without shutting down asterisk? I'm currently rotating the log files via cron, however my script requires asterisk to be shut down, which also kills any outstanding cli sessions (eg, asterisk -rvvvvv). Would like to rotate the files without killing the cli session. Any reasonable way to

Hello-- We have a system where a central server formats removable hard disks, which are then booted in an embedded system running a highly modified RH9. The removable disks themselves contain boot, root, and data filesystems. The problem we've encountered after upgrading to FC3 / kernel 2.6 on the central server is that the 2.4 kernel in the embedded system cannot read the root filesystem,

Had a Pent 4 server running fc3 crash (kernel panic) and am rebuilding from scratch. I installed FreePBX (CentOs) from scratch and asterisk was running, but had not yet been configured. It too crashed with a kernel panic. Ran memtest for 24 hours; no errors or issues uncovered. I then noticed that FreePBX installed using a SMP kernel (and grub indicated a non-SMP kernel was installed as

Been using mpg123 for moh for the last two years or so. However, when I have * config errors, often times get a endless stream of console messages and need to kill the two mpg123 processes. Is there an alternative to mpg123 that eliminates that issue? I see references in musiconhold.conf relative to madplay, native file format, asterisk-addons, etc. Not sure why the asterisk-addon approach

http://www.srh.noaa.gov/fwd/productviewnation.php?pil=OKXZFPOKX&version= 0 can anyone suggest how I could set up asterisk@home to read out allowed the following text when I dial extension 850? 815 PM EST WED FEB 16 2005 .OVERNIGHT...MOSTLY CLEAR. LOWS 30 TO 35. NORTHWEST WINDS 15 TO 20 MPH WITH GUSTS UP TO 30 MPH...DIMINISHING TO 10 TO 15 MPH LATE. .THURSDAY...PARTLY CLOUDY. COOLER

I am trying to create an additional domain and have created a configuration file based on the examples. When I try to boot the domain, it eventually hits a Kernel panic, as follows: Red Hat nash version 4.1.18 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none

I've Found a page with interesing discussion about images backup http://forums.fedoraforum.org/archive/index.php/t-28255.html This give a "dirty" solucion for remove special thing of ext3 (Selinux remove resize_inode and ext_attr features) witch cause the error in ghost. I hope somebody help with the problem of norton ghost and clone centos 4. :) ----------- sfabkk 2005-07-11,

Is there any reason to avoid * on Fedora Core 3 at this time? Have most/all of the issues been resolved now? Rich

Updated the kernel on a fc3 box from 2.6.9-1.667 to 2.6.12-1.1372_FC3 today. Now the cvs-head for zaptel won't compile (libpri and asterisk does). The problem seems to be a symlink issue with the zaptel/Makefile looking for: KSRC:=/lib/modules/$(KVERS)/build and it doesn't exist. The kernel source for 2.6.12 was applied succesfully (supposedly) but a find on "build" does not

Hi all, i?m not sure if my problem is realted to ocfs2 or to drbd, so i x-post this post to both lists. I?ve drbd-volume [v 8.3.9] (dual-primary) with ocfs2 [v 1.6.3] as a filesystem. If I add a "bind-mount" like /var/log/ispconfig/httpd/blog.schaal-24.de /srv/www/clients/client2/web323/log none bind,nobootwait 0 0 to /etc/fstab i`m unable to run umount /srv/www (which is

Hi, I've asterisk-oh323 0.7.3 and after 2 days of test finally I can make calls from one h.323 device to the world using sip trunks :) I can call to sip devices from the h.323 one. Now I want to make calls from sip to h.323 but it does not work. Maybe one of us have a configuration example to do this? I'm using the latest svn version (compiled yesterday).

Hello there! Perhaps this is a little off-topic, but I notice this only on the Centos box. I'm running Centos 4 on an AMD64 which has the following entries in the fstab to connect to NFS shares on a Fedora3 box: 192.168.1.12:/home/angelo/ /home/angelo/NFS_share1 nfs rw,addr=192.168.1.12 0 0 192.168.1.12:/home/angelo/data /home/angelo/NFS_share2 nfs rw,addr=192.168.1.12 0 0

I'm trying to manually garbage data on bricks (when the volume is stopped) and then check whether healing is possible. For example: Start: # glusterd --debug Bricks (on EXT4 mounted with 'rw,realtime'): # mkdir /root/data0 # mkdir /root/data1 # mkdir /root/data2 Volume: # gluster volume create gv0 replica 3 [local-ip]:/root/data0 [local-ip]:/root/data1 [local-ip]:/root/data2

I was doing a upgrade of an existing machine from 5.4 to 5.5. Everything else worked except for this rpm filesystem-2.4.0-3.el5.x86_64 It seems that it's trying to unpack the file into the CentOS DVD mount point > Error unpacking rpm package filesystem-2.4.0-3.el5.x86_64 > error: unpacking of archive failed on file /media: cpio: lsetfilecon Would it be safe to manually download the

Two asterisk boxes 150 miles apart, both cvs-head as of this morning (and since Sept 27th), connected via iax2 with low-utilized ds3 internet, C7960 calls exten on remote system (also C7960), and call goes to VM. No other calls in either system (eg, no load). Both boxes have iax config'ed as: trunk=yes allow=ilbc jitterbuffer=yes Recorded VM messages are very distorted. Changing only

If we change our default subvolume, btrfs receive will fail to find subvolume. To fix this problem, i have two ideas. 1.make btrfs snapshot ioctl support passing source subvolume''s objectid 2.when we want to using interval subvolume path, we mount it other place that use subvolume 5 as its default subvolume. We''d better use the second approach because it won''t bother

In the next week or so, we'll be turning up a new T1 Pri from Cox Cable in Omaha using a T100P (installed but not yet configured). While discussing the interface parameters with a very knowledgable Cox engineer, we decided on some of the basics including b8zs, esf, dchan=24, callerid, 5 digits of called number forwarded to *, and switchtype=national (NI2). They indicated their CO switch is a

A little strange things, but i'm hitting my head on the wall... I needed to 'enlarge' my main filesystem (XFS backed-up), that contain my main samba share and a brick for a GFS share; i've setup a new volume (for the VM), formatted XFS, move all the file taking care to umount and stop GFS (so, syncing the brick, not the GFS filesystem) using --acls and -attrs rsync options. All

I've been using Samba for a long but having some trouble now after changing the server. Here is the environment: Server: Linux Slackware (current / after version 10), Samba 3.0.7, Kernel 2.4.27 Client: Linux Slackware (current / after version 10), Samba 3.0.7, Kernel 2.6.8.1 The problem: My Linux client crashes most times when reading any Samba mount point. I've noticed the problem

Need to replace our older soho fax machine with something more current. Would like to run the fax line through *, but haven't been able to make spandsp work correctly with digium TDM04b card. Our fax volume is very low (maybe a few per week), but we have multiple offices in three geographic locations and would like to be able to email the images to the correct location. For planning purposes,