similar to: H.323 question, take so long time to call

I'm running: OS: FreeBSD 6.0 Asterisk: 1.2.4 Installing OH323: 0.7.3 I have this error when compiling chan_oh323.c: In function `reload_config': chan_oh323.c:4677: warning: implicit declaration of function `sscanf' chan_oh323.c: At top level: chan_oh323.c:3244: warning: 'update_call_ids' defined but not used gcc -shared -Xlinker -x -g -o chan_oh323.so chan_oh323.o

Dear Mailinglist-User currently we`re working with an IP-PBX, based on Asterisk, with SIP, H.323 and ISDN-Capabilities. SIP and ISDN works fine, but H.323 not. In our first test, we started to connect Asterisk to an Cisco IOS-Gatekeeper with the "chan_oh323" (version 0.6.5). We successfully tested in/egress calls without any problems. But when we started to connect our Asterisk

Hi there, I am trying to register asterisk to a Lucent's MVAM GK. It is not registering to the GK with both h323 channels(chan_h323 and oh323). The problem is that if I set the GK(in asterisk) through the GK's IP, the GK answers with GCF without it's GK ID, and after that it does not answer to the RRQ, because the RRQ message has no GK ID. And when I set the GK through

Hi i'm trying to connect to the PSTN in the following way sip ATA -> * -> gnugk -> Cisco AS5300 -> PSTN I'm using asterisk CVS-HEAD-06/01/05-14:33:15 running over RH EL3 Asterisk-Oh323 0.7.2 pre1 Open H323 v1.13.5 pwlib v1.6.6 and I'm having a lot of trouble, gnugk and * both have public ips and are not behind any type of firewall, the sip ATA is behind a firewall and

Hello all, It's me again. I would like play with calls between a H.323 client and a SIP client through * inside my LAN. For that, on host 192.168.1.20, I use GnomeMeeting (GM20) and Asterisk; on host 192.168.1.25, I use SJphone (SJ25) as SIP client on Windows and I register into * with a username, no password. The 3 files oh323.conf, sip.conf, extensions.conf are in attachment. In the same

HI; Thanks for your reply. The reason for why I am going through asterisk in such case is just "using asterisk voicemail service" I mean: ATA1 calls ATA2, suppose ATA2 is unreachable or he is not at the office, then the call reroute (my GK is able to reroute calls if the first route is not valid) to atersik for voicemail service. Do you think I can handle it with asterisk native

I need some help with getting the following to work SipPhone <------> Asterisk <------> H323 GK (quintum) And H323Phone <------> Asterisk <------> H323 GK (quintum) I have tried to run the Asterisk from the newest ports and could after some digging around in the configs register the SipPone to Asterisk and Asterisk to the H323 GK. But when I try to make a call from

Hello there I'm quite a newbie in the IP Telephony area. I'm playing a little around with a setup with one linux box with a e100 p card installed, which functions as an Asterisk gateway and a oh323 GK(Gnu Gatekeeper). I have two h323 phones, Welltech WellGate 1501 and 3502. So far I've managed to get the two IP phones and Asterisk connected to the GK. I can place calls from one

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

Hi all, I have two problems with h.323 in * The first one is, I can call my voip-phone, (exten => 59305004,1,Dial(H323/${EXTEN}@192.168.0.41)) BUT, I hear nothing in h.323 debug mode: *CLI> Allowed Codecs: Table: GSM-06.10{sw} <1> Set: 0: 0: GSM-06.10{sw} <1> -- Making call to 59305004@192.168.0.41. == New H.323 Connection created.

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Dunno why your phone isn't allowing you do negotiate g711u but I can tell you how to upgrade the firmware. I called them on Thursday for myself and they gave me the following tftp server address for which to program my phone. 4.3.153.50 Load this into your phone's tftp area and reboot it. It'll go out to the net and check the firmware revision and change it if required. I've done

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

Hello every one, I have got a H323 gatekeeper for testing. The informations are something like this: account code: test01 gk ip address:192.168.10.12 I don't know how to set it in the h323.conf or oh323.conf, I have tried it for almost one day but I always got the error. Help me please. Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Hi all, I got serious problem here, I hope I ask on the right place here (sorry if I am wrong). I have used asterisk 1.2.17 with openh323 ver. 0.7.3, for integrating between SIP Gateway and H323 Gateway, it runs about 6 months. But, recently I think it doesn't work anymore...I can't call from SIP Gateway to H323 Gateway. I try to debug oh323 by using : # oh323 debug toggle But I got no

Hi, I'm trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with other PBX. The port use to connect is TCP 1720 but I can't configure this port on my * box. I'm using a H.323.conf file sample to activate the port but the * isn't listening there. Somebody have any idea or tip? This is mi H.323.conf [general] port = 1720 bindaddr =

I have installed oh323 channel driver (finaly! :)). I head some problem starting * so I have put the smallest possible oh323.conf file to se what happens. When I don't put available codec's in oh323.conf (*1) Asterisk starts but he also disables h323 channel because there are no available codec's (*2). When I put codec (*3) Asterisk doesn't start (*4). What have I done wrong? I

We come into this section of the dialplan: exten => 88670333333,1,Wait(1) exten => 88670333333,n,SayUnixTime exten => 88670333333,n,NoOp(If you know the extension ...) exten => 88670333333,n,Dial(${PHONE_6003}) The caller from the GK hears only ringing, not the time. The extension 6003 rings and I can pick up, but without any voice nor video. athome*CLI> -- Executing