similar to: billing with PostgreSQL

Hello list, Im writing my dial plan, in witch every SIP phone begins with 74 and has more 3 numbers (like 74XXX). So, I want to route all 74XXX calls to my sip channel. For this I wrote this line: exten => s,1,Dial(SIP/74118@193.136.252.5,30,r) but this way all calls go to 74118@193.136.252.5 ..... Then I tried: exten => s,1,Dial(SIP/${EXTEN}@193.136.252.5,30,r) but this way, the

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

I have configured call pickup, and this works fine. Although there are 2 problems, perhaps anyone would know a solution to this; - When I pickup a call from another set, the *8 code keeps being displayed in my screen (Snom 220). I would like it to show the phonenumber of the person calling me. - When a caller that I've answered through Call-Pickup disconnects, my phone does not close

Hello I need to buy IP Phones to work with Asterisk, and I'm in doubt between Snom and Cisco Phones. Can you gurus, please, give me your impression of these 2 brands? I need to focus more in SIP and Asterisk compatibility and less in pricing (yes, I know the Cisco are more expensive). Are there any features that Snom has, that Cisco doesnt? And are these features important? Thanks Joao

Hello to all, Im trying to use DeadAGI to implement billing with Asterisk2Billing. Before the billing, I had something like: exten => _2XXXXXXXX,1,Dial(SIP/${EXTEN}@voiprovider) Now, with Asterisk2Billing would be something like this? exten => _2XXXXXXXX,1,Answer exten => _2XXXXXXXX,2,Wait,2 exten => _2XXXXXXXX,3,DeadAGI,a2billing.php exten => _2XXXXXXXX,4,Wait,2 exten =>

Hi List; I need to use an prepaid billing system with Asterisk, and I do not know which one is more stable and integrated with Asterisk? A2Billing or AstBill or ASTCC? Also, from where I can download it and ready about its configuration? Regards ITS IP Telephony and Contact Center Engineer Eng. Bilal Ghayad Mobile: 009659849460

Hi all I have a pocketPC Toshiba e750 and I want to make SIP calls from it, but I didnt found any free softphones for my Toshiba. X lite's versions for pocketPC isnt free :( Did someone used before a free softphone for pocketPC? witch one? Thanks Joao Pereira www.fccn.pt

-----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris Mason (Lists) Sent: Monday, September 17, 2007 12:45 PM To: joao.pereira at fccn.pt; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Call Center SoftPhone with Auto Answer Joao Pereira wrote: > But still, the

Is it possible to implement a dial-out call queue in Asterisk? My idea is to give Asterisk a list of numbers, and then he makes the calls and delivers the calls to a call queue. Then, the agents will answer the calls. Is this possible? Thanks Regards Joao pereira

Hello I want to use Asterisk to implement a SIP Domain allowing my clients to do URI dialing and receive calls from the Internet through URIs and ENUM. My question is, should I put my Asterisk outside the firewall (in the DMZ) to allow connections to the Internet? Or should I have it inside my local network and put a SIP Proxy (like Openser) in the DMZ to implement the SIP domain? Thanks

Hi, As many of you may know, we are undertaking several tests in order to test the interoperability between several PBX IP from different vendors. Until now, we were trusting that the VoIP IP PBX were good enough to be interconnected directly, however, one of the vendors have presented the "SBC" concept. The "SBC" (Session Border Controller) is not a new concept since we

Hello I configured Asterisk to put CDRs in the database like it was explained in: www.voip-info.org/wiki/view/Asterisk+cdr+pgsql What I want to know is how do the billing solutions (like Asterisk2Billing) work with Asterisk. The billing system just use the information that Asterisk puts in the CDR table? Or they connect directly to Asterisk? Or is Asterisk that has, before the Dial command,

CDR Stats Analyzer and Report generator It's a rework of famous Asterisk Stats written by Areski. The main goal for this project is to concentrate more on PDF reports (managers love them!). Later more functions will be added. Please test it and send suggestions how to improve it. Licence: GPL Examples, demo and more info on homepage: http://www.paskambink.lt/mcc Regards,

Hello Our NT workstations always ask for the password on each share of the samba server, although the password is the same as the log on password. Is there any way to avoid this ? The first try always fails on the server, but I don't what user/passwd combination NT uses on that first time... Thanks, Joao Pagaime -- FCCN - Fundacao para a Computacao Cientifica Nacional - Tel: 351-1-8440100

I know this issue has been covered with at least 2 different patches, and probably a dozen different discussions, however I'm a bit unclear as to what my options are. I have a DSL line coming in with 8 IP addresses going to an OpenBSD firewall doing 1:1 NAT for machines behind the firewall. My asterisk box is one of these machines, and I'd like to allow foreign SIP clients

Hello to all Im using X-lite, eyeBeam and Cisco 79XX phones and I would like to know the best way of implement a centralized address book system. Maybe the solution is LDAP, but these clients doesnt seem to support LDAP.Who should contact the LDAP directory? the SIP clients or the SIP server? Thanks Joao Pereira

Hello to all When my SNOM (300 or 320) loses Internet connectivity, it loses its Asterisk registration (ok, thats normal). But when the phone is back online, he doesn't try to register in Asterisk. I believe this happens to avoid flooding the private LANs when the Internet link is lost.... but the problem is that the phones don't try to re-register in the future.... Sometimes it stays

Dear Sirs, we ... 1) buy minutes from other providers 2) sell minutes to out clients some calls terminate to our equipment, others - to h323 proxies. we want calls to be routed according to costs (a route is chosen from many by lowest cost). at the end of it, we'd like to bill our clients and see how much have we earned (money we receive from client on one side, money we pay to proxies on

Hi All; I used A2Billing, basically it is nice and fine, but management possibilities is not that rich, so a lot of staff are need to be repeated that let the admin facing a problem of the needed time to do the task. Anyone advise for another open source prepaid billing that is rich by the management features? Also, I hope to find an open source Billing (prepaid and postpaid) that can work with

Dear Steve and *.* e1r2 developers and users, now MFCR2 is successfully installed! many thanks for your help. I'm living in Argelia (north africa). I have configure my MFCR2 according argentina R2 settigs : the test call run perfectly (only warnings and I think that is just debug). but I have many problems and when I run Asterisk-MFCR2. generally in the begging no errors occur. after