similar to: G726-40 required - Help!

Hi, I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of this morning 3/30/04 of asterisk, zap and libpri. The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced". When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I can see: [format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data) ==

Hello, I'm wondering if anyone has benn able to successfully get g726-16 passthrouhg to work? I am wanting to use this codec instead of g729 as I'm running out of DSPs using a high complexity codec on the Ciscos. I would think it would work just as g729 does, which has been working fine for me, but it does not. G726-32 does work great however, but it's like Asterisk doesn't

With sipura (I tried this with both the 3000 and 841) set to prefer the g726-32 codec, a call from the sipura to asterisk will use g726. Asterisk sip.conf has: disallow=all allow=g726 allow=gsm allow=alaw When the call is from asterisk to the sipura, asterisk will not use g726. It ends up using alaw. I usually use stable but I tried this with head too, and same thing happens. Anybody know how

Hello list, Grandstream GXP2010 phone calling to Snom 320, Asterisk in the middle. Grandstream allows for 8 different codec specifications. I have defined them as 4 x G726 & 4 x alaw. Snom allow for 7 different codec specifications. I have defined them as 3 x G726 & 4 x G729. The SIP peers are both defined as : disallow=all allow=g726 allow=alaw allow=g729 allow=gsm This is the

I am able to use sox to convert audio files from ulaw to wav (MS ADPCM), is there a way, using sox or another command line tool, to convert them to g726 ? ( g726-32 since it is supported by * ) tia, -baji. --

Hi All, I am happy to offer $1000USD for the fix of the g726-32 in Asterisk. What's wrong with it? It currently gives a very distorted sound as though the gain is set to high. Lowering the gain on endpoints helps but this is not a fix just a poor workaround. We require g726-32 to be of the same quality as the Asterisk g711 implementation. As the developer who fixes this issue you will

Hi all, I would like to make a call using the asterisk IAX with g726 - 16 bits codec. How could I configure it in the iax.conf file. Do I need to modify the file like this? . . disallow = all allow = g72616k . . I have tried it but it hasn´t worked. Thanks in advance and best regards Guild __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today!

Hi, i tried to compile Asterisk 1.4.21.2 on a server which i have been using with many previous Asterisk versions, without any problems. But with 1.4.21.2 it failed: ---------------------------------- [CC] res_adsi.c -> res_adsi.o [LD] res_adsi.o -> res_adsi.so [CC] res_agi.c -> res_agi.o [LD] res_agi.o -> res_agi.so [CC] res_clioriginate.c -> res_clioriginate.o

Hi Carsten, On 02/11/2018 at 07:46 PM Carsten Bock wrote: > Hi, > > Lost percent (%).... Are you sure? I'm seeing here: ...........Receive......... .........Transmit.......... Count Lost Pct Jitter Count Lost Pct Jitter RTT.... 188K 0 0 0.000 188K 16641K 8809 0.000 0.026 => This doesn't sound reliable to me: there are 188K packets and 16641K

On 02/13/2018 at 08:41 AM Floimair Florian wrote: > No you're reading it wrong. > > There are 188K received with no loss, and 16441K transmitted. This doesn't make any sense to me, either. There can't be more packages transmitted than received. It's the same codec in and out and it's been running exactly the same time. > ...........Receive.........

>So in my sip.conf I put many variations of what I thought should go in >there, >finally including (to no avail): I have had to play this guessing game as well with other codecs/config file settings in general. And I think this email touches on something that has been troubling me for sometime. >You should allow "g726" only. I think one problem area of documentation

Just checking the transcoding on our Asterisk boxes and I get the following results. I have the g726, ilbc and lpc10 formats and codecs enabled in 'make menuselect' so I dont understand why its showing as no translation path. Any ideas? I am running certified-asterisk-11.2-cert2 Thanks Gareth > core show translation paths alaw --- Translation paths SRC Codec "alaw"

Hello Happy New Year! I succesfully installed the Ports of Zaptel BSD 1.4.0 and Asterisk 1.4.13 (that's the latest in the Ports). To save CPU, I'd like to play PCM WAV files instead of eg. GSM. Per... www.voip-info.org/wiki/view/Convert+WAV+audio+files+for+use+in+Asterisk ... I recorded a sample of my voice using XP's Sound Recorder, then ran the following : sox test_wav.wav -r

Could this gap in sequence numbers caused by a codec change generate errors like the one below? [2018-02-13 12:57:43] WARNING[4917][C-0004c2cb] codec_sangoma.c: [526559][g722toulaw] Got Seq 15944 but expecting 10106 (time since last read = 0ms), dropped 5838 packets On 02/13/2018 01:24 PM, Andres wrote: > On 2/13/18 11:55 AM, Michael Maier wrote: >> On 02/13/2018 at 08:41 AM Floimair

Hello, could somebody please tell me the meaning of "Pct" as seen in asterisk cli: ...........Receive......... .........Transmit.......... Count Lost Pct Jitter Count Lost Pct Jitter RTT.... Thanks, Michael

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

Hi there, How do i setup asterisk, so that in the CDR's is only the time, which the line actually was connected? Not the time, the line was up, but the time the user was able to talk to another user. Thanks in advance, Carsten

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

Hi all, I've 2 * tryning to connect each other Server A is already registred on server B But server B never registers in server A I always get this: Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGREJ Timestamp: 00018ms SCall: 00004 DCall: 00003 [XXX.XXX.XXX.XX:4569] CAUSE : Registration Refused CAUSE CODE : 29 Any tip? Best regards, Marco Mouta