similar to: Telasip

I seem to be getting a connection from telasip but instead of dialing my default extension, nothing happens. I listen to dead air. I have a fxo card configured and working on both inbound and outbound calls. Telasip is working outbound. I put in the recommended (by telasip) changes to the trunk for incoming, e.g. host=gw4.telasip.com insecure=very qualify=yes type=user context=from-pstn Then

Hi, I have questions about the Polycom 601 and side card.... 1) In the side card the lights all time off... But all functions it's ok. I need help with extension module of polycom... All works fine... But lights not work.... So... I don't know when any person or extension is busy... Any ideas? , Olger On 3/27/06 11:34 PM, "asterisk-users-request@lists.digium.com"

II noticed that Caller ID presentation is not making it to my cell phone through outound Telasip calls and I don't know why. It may very well have been this way for awhile (or always, not sure I called my cell phone during telasip testing). Does Telasip expect a different format than SetCIDNum(NXXNXXXXXX) ? It has always worked for the Teliax lines. BUT--- It doesn't have a problem

Can anyone give me any direction as to why I'm getting a 404 during the registration process. Sip Debug is: <-- SIP read from 192.168.99.110:5060: REGISTER sip:asterisk1.rightsolve.com SIP/2.0 Via: SIP/2.0/UDP 192.168.99.110:5060;branch=123456789 To: <sip:298@asterisk1.rightsolve.com> From: <sip:298@asterisk1.rightsolve.com>;tag=12345 CSeq: 1 REGISTER Call-ID:

I can't seem to get consistant outbound caller ID working correctly. I have set the fromuser and callerid field in my sip.conf for my TelaSIP peer, but half the time it shows up as "No Caller ID" on my cell phone, other times it shows it correctly. Using asterisk CVS. Any ideas? Doug

My DID with Telasip is disconnected and my Asterisk box won't register with them. Anyone else having problems with them? Jeff -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050814/886ceb38/attachment.htm

Hi, You need to have completely replaced the Microsoft driver, because it doesn't support the headset or ctp Bluetooth profiles. This gave me fits! I followed the instructions at http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html and it works with both a Plantronics and a Motorola Headset, and I can answer calls with idefisk, eyebeam, x-lite, and kapanga. If you end

I am able to pickup, hangup, and flash, using the buttons on the phone with all of the soft clients and both of the headsets I mentioned below. I don't believe I had to change anything on the client side, just had to get the ctp (cordless telephone profile) working in the bluetooth stack, which was a pita. I struggled with the same issue...I could use the headset, but that's not very handy

I didn't change it. I just had a heckofa time getting it to load. Unfortunately, I neglected to document the process, since this was on my home PC and I wasn't planning on replicating it. If I can find some time, I'll see if I can recreate the process. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Probably just a simple syntax issue, but does anyone know how to dial a number and the once phone has been answered, play DTMF tones and then disconnect. I am trying to use this for page notification. Ive been trying the following string with out luck: exten => s,2,Dial(SIP/TelaSip-gw4/5198881212|D(12345678) Any help would be greatly appreciated! -------------- next part -------------- An

I have installed asterisk @ home 2.6. I am using a Telasip VOIP account. When I make outbound or inbound calls the calls seem to connect and then get hung up. I was wondering if there was something that I am misisng. I have tried several different sip.conf configurations. Here is what they are currently. telasip-gw canreinvite=yes context=telasip-in dtmfmode=rfc2833 fromuser=jrasxxx

Kevin, Are you in the US? If so then you've probably got several carriers to choose from. In my experience analog lines have a flat expense of $20-$25 per month. That equates to about $140-$175 per month in flat fees, plus you have usage on top of that. (Your experience may vary.) I am currently experimenting with a company out of NY called Digizip (www.digizip.com) that sold me a Qwest

Hi all, I've just setup a sip line with Telasip and when they route the calls to my asterisk box, they include an extension along with the context that is defined in sip.conf for that DID. At first, I couldn't figure why they were getting 404 error from my asterisk box, but then figured out that they are sending the call to an extension that matches my number with them, in the

Hi, I'm seeking to change my service provider (after ten months, I've had it with broadvoice), but I would like to keep my 310 number. I've been digging through the lists of other providers and am considering telasip (good plans and support number transfers). My concern is what precisely happens when a number is transferred from one service provider to another. After the transfer is

I set up a context to allow me to call in to my * server (via Teliax in this case using IAX2) from my cellphone, and let me do a number of things, including dial other extensions, AND dial outbound again so callers could see my proper work CallerID when I use this service. Is there a way to be able to transfer calls to other extensions of my asterisk server FROM the cell phone/ This isn't a

Any recommendations for a VoIP provider in the UK? I have a few guys in a field office in the UK with SIP phones and a VPN tunnel back to a working Asterisk setup in the US. The Asterisk setup has an IAX trunk with TelaSIP/VoipXpress with local DiD's for US offices, so they can call vendors, customers etc in the US at local rates. I'd like to get the same thing for the UK, so that UK

I set up a context to allow me to call in to my * server (via Teliax in this case using IAX2) from my cellphone, and let me do a number of things, including dial other extensions, AND dial outbound again so callers could see my proper work CallerID when I use this service. Is there a way to be able to transfer calls to other extensions of my asterisk server FROM the cell phone/ This isn't a

Well, I've been dicking around with DUNDi for about 4 hours now. I have two systems that I am trying to get to peer with each other. Queries are working one way, but not the other. The server, pbx1, that is refusing to deliver any queries and logs what's below to the console. Why??? I've checked all the config files more times than I can remember. The 'RFC' for DUNDi at

Am new to Asterisk - have it up and running & connected to a couple service providers (telasip & teliax). Nice! Am running our Asterisk PBX on a static DSL connection (~600 kbps up/~4mbps down), and would like to extend VoIP service to 10 non-profits we're working with. Am I correct in assuming that all calls from each organization would route through our Asterisk server & be

If I understand this correctly, this is a user outside your firewall dialing in to your office over the Internet. Always, inbound calls work, but sometimes, outbound calls do not work. So if you have replaced the hardware totally, and you still have the same problem, it could be a routing issue with an upstream ISP. The way to test for this is to do a traceroute from her LAN to your office. Then,