similar to: Planet VIP-320 DECT gateway with Asterisk?

A few months ago I discovered *. Recently have taken more interest in it, since I have to install phones into my wife's small office. Hope that my questions weren't discussed recently and are not to dumb. The current requirements for * consist of a single incoming ISDN BRI line (currently have 5 MSN allocated), 3 internal extensions and a single analog fax. 1. I plan to buy some el

Does anyone know a good (and stable) voip gateway product with 4 ports (2 fxo and 2 fxs), with the following requirements: * being able to connect analog phones to the FXS ports, and communicate over SIP with an REGISTRAR/PROXY server (SER in our case). * being able to connect the FXO port to local office PSTN network, and dial to that office pstn number and getting an internal dialtone, or

Hi all, I am having problem in using SIP gateway in a very high volume environment (4+ concurrent dial-in) and phone calls in every seconds. There are totally 12 phone lines. Currently I am using 6x VIP-450 for 12 FXS and 12 FXO. However, in this high volume environment, problems encountered: 1) After the gateway running for about 30 minutes, the VIP-450 becomes very unstable. When I try to

Hi All, I'm having problem with this phone. Problems are regarding voicemail message alert on the phone. --- handle_response: Host 'xxx.xxx.xxx.xxx' does not implement 'NOTIFY' --- Can somebody help? On the phone manual, is written that it can acept MWI, but... not mine!!! Thanks! -- .:FaberK:.

Hi, right now I am using only one external server as a gateway for the internal servers. I would like to enable a fail-over on a second server. To implement the floating VIP, should I use heartbeat+pacemaker? Or is there something more "lightweight"? Basically, I just need server2 up the VIP when server1 is down, and server2 down the VIP when server1 is back up (or server 1 does not up

Are virtual IPs supported on eth interfaces in domU(s)? Thanks _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I've got the following setup: IAXy -> Dect Base Station. When you dial from a SIP phone (cisco 7960), the rings with very little delay. However, if you hangup it takes 3-4 rings after hanging up before the dect base station phone stops ringing. The same applies when an incoming call is directed from PSTN FXO -> Dect Base. Is there a fix to this I've looked about on voip-info but

Hi, Do you if a DECT-GAP (or DECT-CAP) compliant handset MUST or MAY support roaming and handover and are these functions transparent for handset (then, these functions are implemented in DECT base stations) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080110/4254f602/attachment.htm

Hi, looking for your valued input on suitable suggestions for high quality VoIP DECT phones. I am having real issues with my Snom M3s and Asterisk 1.6 and looking to a new manufacturer. -- Thanks, Phil

Hello, I need to setup system of aroud 60 DECT phones with asterisk. So far I found http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-ip-phones/dp715_710 However is there some cheap base station(similar to GSM cell) so I can handle all DECT phones centralized and plug it inside asterisk ? Thanks, Peter

Hello, I need to setup this configuration: - asterisk as IVR; - dect phones. So basically I need a "standard set" of features: - each dect phone has its extension so I can call it directly; - handover of a call with "R" key; - if a call is not replied by someone ring all phones. I have little budget. I can choose to buy a fritz!box or a gigasect dect/ip base station. Which

Hi all, I'm looking for a PCI card which i could install on asterisk box, with purpose to use 15-20 cordless dect phone in a very "dect cell". Is there anyone that could help me pls ? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL:

G'day. I hope this isn't off-topic for the list. I am looking at an Asterisk setup that includes cordless phones. The three choices I can see, at this stage, are: * wifi phones * an ATA and a cordless analog phone * a DECT to SIP basestation The various wifi phone options don't grab us as suitable -- they are costly, have poor battery life and even the best have pretty mixed

Anyone here that knows some hardware USB "client" (DECT) that can connect to a DECT base station and act as a "provider" in asterisk? Ergo, asterisk is the DECT handset, and connects to the DECT base station. Its also important that it also works with most asterisk-compatible devices, including for example raspberry's. The reason I ask, is that many providers in

We've deoplyed a number of pure VoIP wireless (wifi & proprietary) phones, but not dect. Is there a simple overview of integrating DECT phones with Asterisk somewhere? I assume the DECT basestation has a multi-account SIP VoIP interface, and the handsets are just plain old dect? Can you push configuration info to individual phones? (Are they individually addressible / configurable

Hi folks: I know it's come up a few times before, but I need some more detail. I'm looking for a SIP DECT (cordless) phone for North American installations. I've heard only of the Siemens Gigaset S450/C450 phones. Apparently these aren't sold for use in NAm, even though they're supposed to be legal (in the United States, anyway). On top of that, I understand they have some

Hi folks, The recent mention of DECT on this list has got me thinking....... (yeah dangerours!) I have very little experience/knowledge with DECT and mainly where I have seen it used in a multibase base situation where handoff between bases occurr. This has been and ericsson system used as an adjuct to an ericsson pbx on a large multistorey property. If I remember correctly the bases are fed 2

I see a variety of DECT 6 phones available CHEAP at costco. Is there a way to convert these to SIP? I recall someone talking about a Siemens devices that works with all DECT phones, making them SIP (I think).... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081205/fdd14af9/attachment.htm

Hello everyone! I am working on implementing my first Gluster/Ganesha NFS setup and I am flowing this guide: http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganesha-and-glusterfs-one-step-at-a-time Everything is working fine. I've got Gluster and Ganesha NFS working and I have VIPs on each node and it is failing over fine, if a little slowly. However, the VIPs don't

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them