similar to: can't start chan_capi with asterisk group

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Hi all, i'm tryinf to install chan_capi but i get this error root@obelix:/usr/src/chan_capi-0.3.5# make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i586 -DNEVER_EVER_EARLY_B3_CONNECTS -DCAPI_ES -DCAPI_GAIN -DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1

Hello, list a have a problem i can start asterisk, i get the fowlling error: [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Feb 11 13:50:36 NOTICE[2535]: chan_capi.c:2636 load_module: CAPI not installed! Feb 11 13:50:36 WARNING[2535]: loader.c:345 ast_load_resource: chan_capi.so: load_module failed, returning -1 Feb 11 13:50:36

Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk

I own a ME600 EPIA Mini-ITX main board with the latest Debian distro (kernel 2.6.8) with isdnutils-base, libcapi20-dev, libcapi20-2, isdnactivecards installed. I have a QuadBRI module by Junghanns with bristuff-0.2.0-RC3a (with asterisk-1.0.3, zaptel-1.0.3 and libpri-1.0.3), and chan_capi-0.3.5. I followed all INSTALL instructions, but I have some strange behaviour. All modules seems to be

Hi, I have a compilation errors with chan_capi 0.1.0. I have : chan_capi.c:33:20 capi20.h: No such file or directory and a lot of errors with this error. The capi20.h is in /usr/srx/linux-2.4.18-14/drivers/isdn/eicon/capi20.h. So I don't know where the problem. Someone have a solution ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to compile chan_capi 3.3.4a, but I end up with lots of gibberish. Near the top it states that capi20.h doesn't exist. Searching for the file, several show up: # find / -name capi20.h -print /usr/src/linux-2.4.21-144/include/config/isdn/capi/capi20.h /usr/src/linux-2.4.21-231-include/smp/include/config/isdn/capi/capi20.h

I am trying to use chan_capi with an Eicon Diva Server BRI. I installed the Eicon drivers from source including CAPU and I can use the board correcly using tty_test and minicom over /dev/ttyds01 or /dev/ttyds01. I need to insmod capi ( why? it is not written anywhere) and then capiinfo shows me all board parameters, but I have to break it otherwise capiinfo doesn't exit at all, but I don't

Hi all, I compiled/installed chan_capi.so without problems. When I launch Asterisk, I get the following error: --- [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif: ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0 Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338

Hi, I am trying to configure a Diva Server 4BRI to work with chan_capi. Here are the steps that I took: - compiled fresh kernel with new-style CAPI support: i4l_divas_1.2 - got the divactrl_1.2 utilities, configured the card startup scripts, - rebooted, card firmware loaded properly, "capiinfo" displays detailed info on 4 controllers, however there is an error message: FAC REQ -

Hi everybody. I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7 My linux is a debian. It was working during a few days an suddenly (after a lot of reboot) I've got this error message that seems to be very popular but I couldn't find any answer on the net : ==============================================. Asterisk Dynamic Loader Starting: == Parsing

Hi List, Additional with the latest tries from the below I get a nice random seg fault when I hangup on PSTN. (With obviously no sound on x-lite, still!) asterisk -vvvvgc results after hanging up the pstn line in: -- Executing Hangup("SIP/1087997-d79f", "") in new stack == Spawn extension (sip-phone-out, h, 2) exited non-zero on 'SIP/phonenumber-d79f' Segmentation

Hello Armin, hello List I'm trying to get chan_capi working with asterisk from debian stable (asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2). I managed to get it compiled by providing my own version of ast_copy_string. This is an Austrian PTP line. I can do outgoing calls fine (no comprehensive tests yet). For incoming calls, I'm getting "No answer" on the

Hello configuration as follows, dial-out works: capi.conf: [hfcpci] ;;PointToPoint (55512-0) isdnmode=MSN incomingmsn=* ;msn=61 controller=1 devices=2 context=incoming extensions.conf: [incoming] exten => _XX,1,Playback(demo-abouttotry) exten => _XX,n,Dial,SIP/xlite1 exten => _XX,n,HangUp When call is placed, the following debug info is shown, after the last line, it stalls until

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

Hello, I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As a BRI connection has 2 channels and allows 2 simultaneous calls, numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system is working (partly, read on), the trick is the correct cable wiring and setup the PBX's port

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

Hi, I have a problem for install chan_capi My pc: Suse 9.1, with asterisk current stable en cvs I have download http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz And the path from http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2 And patch the chan_capi # cd chan_capi-0.3.5 # patch -p1 < chan_capi-0.3.5-patch.diff # make /for install My error