similar to: Snom 360 - Multiple Server BLF Indications

Just come across a problem - we have sent out heaps of PAP-2 ATA's and just discovered that when joined in a conference they are choppy on the up leg (so the other users in the conference will hear them with a choppy sound) but the down leg is perfectly fine (so the end user can hear the conference participants perfectly). I have tested the same setup with different brands of ATA's

Anyone noticed the snom 360 indications are incorrect for US zone? menu->preferences->tone scheme->usa indications.conf: [general] country=us extensions.conf: exten => 1111,1,Answer exten => 1111,n,Playtones(dial) exten => 1111,n,Wait(30) exten => 2222,1,Busy exten => 3333,1,Answer exten => 3333,n,Playtones(busy) exten => 3333,n,Wait(30) hit speakerphone on the

Hi List, I have a problem with Asterisk 1.6.1.6 realtime (MySQL databases hosted on a separate machine). When Asterisk is in verbose mode, it prints messages saying "failed to extend from 512 to 664" (quite a few lines in a block) and then the last message is mostly "failed to extend from 512 to 663". The number of lines varies unpredictably. The full message (in the logs)

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

Hello everybody. I have created an extension that enables/disables the night service mode on asterisk (i.e. voicemail is started on incoming calls, instead of entering a queue). The night mode is activated/deactivated by the front desk operator when the office is about to close, by pressing a line key on the phone, which dials the related extension. Does anyone know a way to have an indication

Hi, I was wondering if anyone else has a similar setup and can suggest settings for the jitterbuffer: I have a client with an ADSL connection at site A & B with site A being dedicated to voice and having no Asterisk server, site B combining voice and data with traffic shaping and housing an Asterisk server. There seems to be packet loss / jitter on this connection and I wanted to know

Hi, I have just completed the deployment of a couple of Grandstream phones (for internal IP use) and was wondering how much harder it would be to deploy a Polycom IP 300 phone. The Grandstream was quite easy to deploy and gives us good voice quality over DSL, however from some of the previous posts I am see that some people had troubles with the Polycom 300. The variant I am looking at

I'm looking for some feedback on the Snom 360 phone. After deploying six of them to an office, I'm not as enthusiastic about them as I was when I was testing one before the deployment. The firmware seems to be consistently buggy, some of its problems are intermittent which makes it frustrating to troubleshoot and the support from Snom is lackluster to say the least. I find myself favoring

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi The blf-crypt password schema mentioned in the docs could be a solution to my auth problem. However, the docs state that actual support depends on the glibc. Mine apparently doesn't. Does support depend on the glibc's version (mine is 2.15-r2)? Maybe someone with access to a box with a good enough glibc could do the following and post the hash for the plain password "test"?

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hello list, Can I do something like this for BLF functionality : [test-blf] exten => _XX,hint,Macro(GetSIPaccount,${EXTEN}) exten => _XX,hint,SIP/${SIPACCOUNT} GetSIPaccount is a macro that looks at a MySQL-database for the realtime table sip_buddies where the SIPusername is taken from. It works great for internal calls... but how about BLF-functionality ?? Feedback is appreciated !

has anyone done it? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080528/ff622d28/attachment-0001.htm

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

Hi, all I am in Australia and I have to setup Asterisk in few offices. There will be IP phones in each office and I must be able to call between offices. I need actual handsets. I need "standard" handsets to be used by people. Those must support features like CID, call forward, etc. --- your normal office feature set. Also I need some sort of more complex handset to be used by

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Dear all, I've implemented BLF for use with some Grandstream GXP-2000 phones and it works fine in 1.2.x versions of Asterisk, although I tested it with version 1.4.0 and it doesn't work! Has the needed syntax changed for configure BLF for this version of Asterisk? It it a bug of this version? Or should it be misconfiguration that I'm doing? Thanks, Ricardo.

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

I have a setup with Yealink phones & Asterisk Server (all latest patches). I am using BLF to display the states of other phones. While this works MOST of the time (busy, being called) it does NOT work when a phone is NOT regisstered at all, the yealink phones display a green dot EVEN if a phone is turned off (try explain this to users, they are shaking their heads!!!) I can see on the