similar to: chan_h323 problem

Hi, Someone released a succefull interconnection in H323 with WTL equipement ? I'm trying to do that with an IPNx. But get dead air. With chan_oh323 it's fine, all works. With chan_h323 => dead air. The configuration is GW to GW. This is my configuration from h323.conf: [general] port=1720 bindaddr=my.ipaddr dtmfmode=rfc2833

Hi list, why I cannot hear voice when I call from a SIP telephone (Budgetone and others) to a H323 telephone (several models)? could anybody please give any idea to solve this issue? Please, let me know. Thanks in Advance. N.B. The configuration for "extensions.conf", "sip.conf" and "h323.conf" files are: ***************************************

Greetings, I have a problem making a call from Asterisk to Cisco H323 PSTN gateway using H323 channel. I can call but there are no sound in both way. If I call H323 gateway directly from SJPhone I have no problem with sound. Any advice are welcome. Thanks in advance.

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Hello every one, I have got a H323 gatekeeper for testing. The informations are something like this: account code: test01 gk ip address:192.168.10.12 I don't know how to set it in the h323.conf or oh323.conf, I have tried it for almost one day but I always got the error. Help me please. Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL:

<P>Hi all!<BR><BR>I'm trying to set up Asterisk on FreeBSD 4.9 to route calls to H.323 GK.<BR><BR>I have installed asterisk using the ports.<BR><BR>It seems to be running OK, but when i try to dial through h323, it segfaults.<BR>I'm using X-Lite as SIP client, i have set up my h323.conf:<BR>[general]<BR>port =

Hi all I'm trying to set up Asterisk on FreeBSD 4.9 to route calls to H.323 GK. I have installed asterisk using the ports. It seems to be running OK, but when i try to dial through h323, it segfaults I'm using X-Lite as SIP client, i have set up my h323.conf [general port = 1721 bindaddr = 0.0.0.0 tos = lowdelaydtmfmode = rfc2833 context = Out noFastStart = yes noH245Tunneling = no

Hello, I have few questions about Asterisk. I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago. 1.I couldn't find Asterisk version using "asterisk -V" command. How can I to find version information? 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on it. I tried Asterisk CallerID feature, but unable to get it. I tried callerid signaling V23,

Hello, Thank you for the job well-done. I installed the chan_h323 of the asterisk-1.2.7.1 and with lib pwlib-v1_10_0-src-tar.gz and openh323-v1_18_0-src-tar.gz and I used licensed g729 from digium. However, I am having a very funny behavour. 1. If I send a call on its ringing at the called side but the caller didn't get the ringing tone. 2. if the called picks up the phone, I am

Hello everybody, when I upgraded from RC1 to RC2 I didn't had any audio between my ATA286 and H323 EP (my post from 13/08/04) I checked further and discover that problem is with ATA286 who is unable to call. I always get an 404 error. Coming back to RC1 everything works fine again. I tried to modify my dtmfmode from rfc2833 to info but in change nothing. Local call to asterisk are

Greetings- As most of you who monitor this list know, I've been messing about with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel driver here for some time- with pretty decent success. I'm hoping to cash in a chip here- I've run into something that is probably a very simple answer, yet not found a decent reference to resolve it. Scenario- -HEAD as of last week

Hello, I'm trying to setup an asterisk extension to be attached to an H.323 gatekeeper so that an asterisk application (Astcc) answers H.323 calls from any terminal logged into the gatekeeper. I'm using asterisk's channels/h323 implementation, and I've configured the following in h323.conf: [general] port = 1720 bindaddr = AAA.BBB.CCC.DDD allow=all gatekeeper=XXX.YYY.ZZZ.AAA

> 3. Supposed I have 2 fxo cards (right now I have one already) and 3 > fxs, and one of the fxo will have two phone (running pararell), is > there any way for * to: > a. It always dial the first fxo, if the fxo is busy or is being used > (have other people conversation), will * be able to switch it to > other fxo? Here's the approximiate the conditions of the phone.

Hello, I have few questions about Asterisk. I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago. 1.I couldn't find Asterisk version using "asterisk -V" command. How can I to find version information? 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on it. I tried Asterisk CallerID feature, but unable to get it. I tried callerid signaling V23,

Hello, I have been using FreeBSD-7.0STABLE with BIND-9.4.2 ( i guess, forget to check before upgrade) up to 2008-01-26 (yesterday). But after upgrade FreeBSD-7.0STABLE-->FreeBSD-7.1STABLE everything goes wrong. 1.BIND can't start anymore and giving me following message at /var/log/messages: . . . Jan 27 12:30:20 ns kernel: ad4: 152587MB <WDC WD1600AAJS-75PSA0 05.06H05> at

Hi all, I have the following setup: UAs ------------SER ------------------------ ASTERISK ---------------------GNUGK --------------- GWs SER is configured to route call requests from UAs to Asterisk. Asterisk is configured to receive the call on SIP channel and dial out to GNUGK over H323 channel. The problem I'm facing is that asterisk sends out the call request to GNUGK and times out

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i have a working Microsoft ISA firewall with buildin H.323 Gatekeeper.... So Far, i got registerd the asterisk on the M$ Gatekeeper... here is the h.323 configuration: ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 allow=all ; turns on all installed codecs dtmfmode=rfc2833 gatekeeper =

This week starts with the exciting news: We're getting close to Asterisk 1.0 again. After the failed attempt earlier this year, we've been able to remove a lot of the MAJOR/CRASH bugs from the bug tracker and Mark feel's it's time to target 1.0 again. At this point, the community needs to work as a community, spending extra time on finding bugs, solving issues, improving

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --