similar to: what are these and can they be fixed?

I have fixed this before, but I cannot for the life of me remember how I did it. I have a TDM400P with one fxo module and one fxs module. I setup Asterisk @Home and everything works fine, except when I try and call out. If I call out with a SIP phone it calls the zap extension and not the pstn line? If I take the zap extension offhook and call with the SIP phone it dials out the pstn line

Boy oh boy. This blows. I upgraded to 1.2.2 from 1.0.9, and of course had the timebomb bug. Immediately after upgrading to 1.2.3 we were ok, for 24 hours or so. Since upgrading to 1.2.3, though, the whole system has locked up twice. Once on Thursday, and then about a half hour ago. The server would reply to a ping, but no ssh login, no local console login - just locked up. This ain't good for

Hello folks, I'm having trouble configuring Asterisk to play an "invalid extension" message to anyone dialing an undefined extension. First I tried using the 'i' pseudo-extension, but it didn't work at all; searching the wiki I found that page: http://www.voip-info.org/tiki-index.php?page=Asterisk%20i%20extension where it basically says that the 'i'

I used the "FreePBX on Debian" HowTo at http://powerontech.com/freepbx-on-debian.htm to install. I use callfiles to initiate calls to my SIP carrier. They get my registration, but they see that my call is interrupted before they can complete the connection. My Asterisk log shows that the call times out after the time (45s) specified in my dialplan Dial() command. What is wrong? [from

Hello, Just want to tap the collective wisdom of this list as to experiences pertaining to the Handytone HT488 and the Sipura SPA-3000 adapters... Basically I'm looking for a FXO/FXS/LAN ATA and these two seems to be the top of the pick..Any comments and experiences esp. with Asterisk compatibility would be great, before I plonk in the bucks. TIA. /wai-sun

http://www.pcmag.com/article2/0,1759,1812887,00.asp Specifically, his assertion that ISP's would sniff traffic and block, say, the SIP port. You could play wack-a-mole with port numbers, no? Also a community based, Freenet style of encryption implementation for "free" VoIP traffic would address this issue. I raise this to the list because I'm sure there's a grain of

>> The call that gets dropped had a retransmission of INVITE from UAC >> to UAS (and therefore retransmission of 200 OK from UAS to UAC). >> There is nothing wrong with the re-transmission as such, but I >> noticed a potential bug in Asterisk in the way it responds to an >> INVITE retransmission. Asterisk is bumping up the session version >> number in

I'm getting a couple strange things with asterisk on Broadvoice. It works fine currently for inbound and outbound. Everything is registered, its perfect. My problems currently are: 1) After 20 minutes audio out to broadvoice goes away 2) After about 3 hours my registration attempts to broadvoice time out and the only solution is to switch to a different proxy which subsequently works.

I'm looking for a good web based voicemail client that can use mysql or realtime drivers. I can't seem to get vmail.cgi to work with realtime. Thanks for any help you can give.

I am hoping some of you can help me troubleshoot this problem I am having with my home asterisk machine. I have incoming POTS service using a SPA-3000 (extension 119). Calls on that line go to an attendant recording that offers a menu choice: press 1 for Nancy, press 2 for the rest of us. In reality, pressing anything other than 1 sends the call to the rest of us by dialing both extensions 101

Hi, Is it possible for a Manager/Supervisor to intercept and listen in on live calls for training and evaluation purposes? Thanks -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hi, I have debug off (debug level 0) why are the following lines showing up in '/var/log/asterisk/full' Mar 31 06:56:19 DEBUG[2423] chan_sip.c: Stopping retransmission on '765e20595817e9897b77cff23f821cc5@10.0.0.254' of Request 102: Match Found Mar 31 06:56:19 DEBUG[2423] chan_sip.c: Stopping retransmission on '4858cde16223cc0716e325921a8a0654@10.0.0.254' of Request

I'm wondering if anyone else has gotten something similer to this? I had FWD working fine on the asterisk box, then all of a sudden it just stopped working. I get the following errors (just keeps looping) *CLI> DEBUG[1125329600]: File chan_sip.c, Line 527 (__sip_ack): Stopping retransmission on '6dc8436c7c568eea75fffdc75478ed54@142.55.31.179' of Request 102: Found

I'm using Asterisk 1.0.4 with AMP and Broad Voice. I have that with only 5 XTen Lite phones. I'm able to call / etc with internal phones just fine. I can call outside Vonage Numbers, and other BroadVoice Numbers. I have vonage where I live (626) and can call that fine. However, other 626 numbers I get similar errors as below. However, everytime, I try to call cell phones, and or

Good day everyone, I have Asterisk and Mitel 3300 ICP communicating via SIP. Calls to and from extensions on both sides are completing successfully (details on config coming soon). Problem is that calls from Asterisk to PSTN via E1 on Mitel 3300 ICP are rejected. What do I need to do to get Asterisk to route PSTN calls through it successfully? Here is an extract of the log on Asterisk whenever I

Hello, Can somebody please assist me with my problem. Currently I am using a Asterisk@HOme version 2.4 with a TE406P digium card. One the E1 is connected to a telco switch via an ISDN. May issue is that may incoming calls in the zap channels gets disconnected or release after 1 ring. I really dont know what setting should I change to increase the timeout of the ring. I have even tried upgrading

ARI (Asterisk Recording Interface) has reached another milestone. The project is starting to become a full featured user portal and handle all the common errors that people seem to have. This release supports: call monitor page ? new features include column sorting and filter small duration calls in addition to the ability to listen to call monitor

On 2017-02-21 16:39, Tomasz Chmielewski wrote: > tshark shows "TCP Spurious Retransmission" for cases where curl is not > able to fetch any data. > > > Both tinc servers are running Ubuntu 16.04 (64 bit) with tinc 1.0.26. > > DC1 is Europe (Hetzner); DC2 is in USA (Amazon AWS). > > > > What's interesting, I don't have these timeouts when I

try "sipsak -M -O desktop -B "foo" -s sip:<user>@<registrar> -H <ip of registrar>" the trick is to specify the "-O desktop" parameter + the "-H <ip of registrar>" parameter. Sipsak fakes the host-header of the registrar so that the Snom thinks it is coming from your Asterisk server, then lets the message through to the

I am not having any luck placing out going calls I dial the number 08 82420173 ( our outside line ) But all I get is engaged signal and log this. Oct 14 08:40:14 DEBUG[16401]: File pbx_wilcalu.c, Line 65 (autodial): Entered Wil-Calu fd=20 Oct 14 08:40:14 DEBUG[8201]: File chan_sip.c, Line 657 (create_addr): Setting NAT on RTP to 0 Oct 14 08:40:14 DEBUG[8201]: File chan_sip.c, Line 548