similar to: How to hide CallerID - SetCallerPres(prohib) not working

Hi, I am using: Asterisk 11.2.0 libpri 1.4.12 Dahdi: 2.6.1 Sangoma E1-Card with Wanpipe-Drivers 3.5.28 I call my asterisk box via SIP and connect the call to an AGI-Script. Within the script I do EXEC SetCallerPres prohib or EXEC SetCallerPres prohib_not_screened But I get the following error: ast*CLI> == Using SIP RTP CoS mark 5 -- Executing [100 at sip:1]

Does SetCallerPres(Prohib) remove the ANI data from a SIP call or does it simply set a flag telling other devices not to display the data? In other words, could another system override that and see the caller ID anyway? The answer may affect how I handle 911 calls, so I'm very curious.

Hello, on my ISDN phone I can configure that on the next outgoing call, my telephone number should not be transmitted, instead it should be UNKNOWN. How can I configure Asterisk to do the same? Is this a feature/parameter of the driver (chan_capi) that I'm using? BTW: I'm using ISDN and Deutsche Telekom, if the provider makes any difference. Thanks for your help, Stefan --

Does anybody know if SetCallerPres works on calls via SIP through a Cisco gateway? We are trying to mark outbound calls as anonymous and we set it to prohib, but calls still show outbound callerid. We are SIP from * to the Cisco gateway and then PRI outbound. If we strip the callerid num, then the first number on the PRI gets added as teh callerid, so we can't do that. We need to make

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

Hi, how can I setup asterisk to use the number presentation bits on the isdn side to suppress the number presentation? We need to transmit the subscriber number for billing purposes via ISDN whether or not the user wants to hide his/her number. Is there any way to do this? Deti

Hi; How can a user block his caller-id in Astersik? Regards Mohammad -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041229/07ecf20f/attachment.htm

I've just upgraded to the latest CVS head, and my outbound calls stopped working. I traced it back to the line exten => s,9,CallingPres(${ARG2}) It seems as if this application is now missing. I tracked back the changes and found in 1.415 of chan_zap.c the code was removed because it was "duplicated". However, it does not exist anywhere ! Am I being stupid, missed

Hi all, A few days ago I found out with help of some of you guys how to set CLIR. (Calling line identification restriction) My first idea was to use the keypad protocol to set the CLIR with dialing *31* before the number but this was not possible. So thanks to Damon Estep I got it to work with executing 'SetCallerPres(prohib)' before the dial command. This works perfectly! But now

I have a little call recording script that I am running and it works fine, but I have one problem. I get CDR when a user calls into the extension, but I do not get CDR for the call that it makes outbound on # 17. Any idea why? Here is the extensions info: [default] exten => 2211,1,Answer exten => 2211,2,Wait(1) exten => 2211,3,Playback(/etc/asterisk/recording/getshop) exten =>

I am trying to setup one time caller id block on my system(activated when an incoming call matches *811XXXXXXXXXX), and I have had little to no luck. Could you take a look at my context/macro definition and help me figure out what I am missing? Here is my context for my dialplan: include=default plancomment=user-default

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Hello SetCallerPres function seems to be removed from Asterisk 1.4. What function or application replaced it? Bit of a problem if you want to use CLIR on your PRI connections. Jon No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.7.6/815 - Release Date: 22-05-2007 15:49 -------------- next part -------------- An HTML

Hi Barry Flanagan, Barry Flanagan <barryf-lists at flanagan.ie> schrieb am Mit, 19. Aug 11:06: > SIPP is probably what you seek. http://sipp.sourceforge.net/ > > Hope this helps. That looks pretty like what I'm looking for! Many thanks! Sincerely, Dominique Haeber

The AGI debug command worked well, and I found the offending command: SetCallerPres(allowed) That worked in Asterisk 13, but from my google searching it looks like this command has disappeared in Asterisk 20 (actually everything after ver 13). I thought it was replaced with CALLERPRES(allowed) but this generated an error too in Asterisk 20. Is there a replacement command? -----Original

hi all! I'm running an Asterisk-box with bristuff-....RC8n and 2 HFC-S cards. I m located in Vienna/Austria. I have the problem that on outgoing calls i hear my voice as a short echo (about half a second). This occurs not on every call. I tried some changes in my zapata.conf, with rxgain and txgain settings, but to me its hard to find a configuration which is good for every call i make. Is

Hi All, I got this figured out, when the privacy is ON at the other end of the server and when we get the Invite message to the server connected to PRI's, just take the details from the invite message in the Dial plan and send the calls as anonymous: exten => _1NXXXXXXXXX,n,Set(PRIVACY=${SIP_HEADER(Privacy)}) exten => _1NXXXXXXXXX,n,ExecIf($["${PRIVACY}" =

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

I should have included the debug output: <PJSIP/Twilio-NA-W-3-In-00000006>AGI Rx << CALLERPRES(allowed) <PJSIP/Twilio-NA-W-3-In-00000006>AGI Tx >> 510 Invalid or unknown command -----Original Message----- From: asterisk-users [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of TTT Sent: Saturday, July 1, 2023 11:37 AM To: 'Asterisk Users Mailing List -

I have an issue where a particular dialplan works but another doesn't. I'm not sure why. To me they look identical and it has me stumped. This works: [to-test] exten => _X., 1, SetCallerPres(allowed) exten => _X., 2, Monitor(wav,/tmp/test-${UNIQUEID},mb) exten => _X., 3, Ringing exten => _X., 4, Dial(SIP/9330 at a-test,20,ro) exten => _X., 5,