similar to: Problem with intermittent one-way audio

Hi, I use a simple scheme: SIP video phone A (h264/Asterisk 1.8.11) <---IAX2 trunk----> SIP video phone B (h264/Asterisk 11.7.0) When calls from A to B and vice versa drop on pickup. On B side: [Oct 24 16:33:49] DEBUG[15590][C-00000012] res_rtp_asterisk.c: Setting the marker bit due to a source update [Oct 24 16:33:49] DEBUG[15590][C-00000012] res_rtp_asterisk.c: Setting the marker bit

Some more info: Just tried this on a server without using any NAT and no port forwarding, no masquerading, and I still have the same problem. So there goes that idea. I do not know what this VNAK error means. By the way, I am using the latest version (1.2.6) of asterisk, have also tried other versions with the same problem [1.0.9 (Ubuntu Breezy) and 1.0.7 (Debian Sarge) and 1.2.1 (Ubuntu

Howdy, I recently saw something strange with a call between *'s over IAX2. There are actually 3 *'s involved. The setup is like this: SIP phone ------(ulaw over LAN)------ *1 -------- IAX2 (ulaw over Internet) ---------*2--------(GSM over Internet) -----------*3--------(ulaw over LAN)------ SIP phone Now what is shown below is the Asterisk in the middle, that is doing the

Hi all, I am trying to connect to a softphone application using an Iax channel on Asterisk 1.4.30. I can do outbound calls, from softphone to asterisk, but not inbound from asterisk to softphone. I get the following Debug: ---------------------------------------------------------------------- ---------------------------------------------------------------------- Tx-Frame Retry[000] -- OSeqno:

Hi Barry Flanagan, Barry Flanagan <barryf-lists at flanagan.ie> schrieb am Mit, 19. Aug 11:06: > SIPP is probably what you seek. http://sipp.sourceforge.net/ > > Hope this helps. That looks pretty like what I'm looking for! Many thanks! Sincerely, Dominique Haeber

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default]

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default] exten=>_.,1,Dial(IAX2/${EXTEN})

Dear Sanjay, Sorry sanjay i miss to explain completely. My PC2PC mean is Dialer2Dialer i want to allow call between Dialer with out any registry and authentication through IAX. so i need to setup Asterisk accept calls from any user and users can call to each other without any password and registration. please help how can i configure Asterisk using IAX in this regards. thanks, Asif Message: 9

I'm taking inbound calls on an * server, then transferring them to a second * server where they join a MeetMe conference. If I have 'notransfer=yes' set on the first * server it works fine, but if I allow the transfer (call then shifts to be between the DID provider and the second server), the call is dropped 3-5 minutes later. There is no firewall on my end, and the two

Hi, We are trying to use attended transfer with Asterisk 1.2.5, but when we do the transfer and dial the new number, it times out after 3 rings and then the callee is put back to the original agent. Where can I adjust the timeout which applies to the number we are transferring to? I have changed the extension for this number to timeout at 60 seconds, but that seems to make no difference. --

On the asterisk1 I got this: register => username:secret@ipaddress2 [eop] username=username secret=secret type=peer host=ipaddress1 auth=md5 on the second box I got this this host is ipaddress2 [incommingiax2] username=username type=user secret=secret host=dynamic context=from-internal-custom auth=md5 on first host 1 am getting: Jun 22 14:42:10 NOTICE[2398]: chan_iax2.c:7411

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

According to my IAX-provider, an account has been created for me on their Asterisk-server... But the Asterisk CLI tells me this : asterisk*CLI> iax2 reload == Parsing '/etc/asterisk/iax.conf': Found [Apr 30 20:51:30] NOTICE[6391]: chan_iax2.c:10124 set_config: Ignoring bindport on reload [Apr 30 20:51:30] NOTICE[6391]: chan_iax2.c:10183 set_config: Ignoring bindaddr on reload

I was wondering if anyone had seen this problem before and/or could offer any insight into what the trouble might be: I have an Asterisk machine that it set up as a mutual friend with another one (in another state... about 150ms away). Calls between the two fail to get established approximately 50% of the time. When a call works, everything is fine. When one fails, however, I see a large

I tried to connect my * to IAXtel, but i always get this errors. chan_iax2.c:5849 socket_read: Registration of 'mnetwork' rejected: Registration Refused On dial a iax number i get: chan_iax2.c:5526 socket_read: Call rejected by 69.73.19.178: No authority found chan_iax2.c:5528 socket_read: Immediately destroying 3, having received reject chan_iax2.c:2411 iax2_hangup: We're hanging

Hello all! I?ve got a problem with the IAX setup. I?m previously only experienced with SIP, so that may be part of the problem. However, I?ve managed to register with the IAX server without any trouble (register line apparently works as it should), and I am also ale to make outbound calls. However, for inbound calls, all I get is this (from iax2 debug): Mar 29 17:44:18 NOTICE[11502]:

Hi! I'm using asterisk 1.4.17 with twinkle and a custom phone based on iaxclient 2.0.2 and I'm struggling a bit with DTMF and features.conf. While the twinkle client is able to initiate an attended transfer using *2 (as configured in features.conf), the iax client is not. I can see the DTMF messages showing up on the asterisk console, but asterisk does not invoke the features

I am using Teliax to terminate my calls, and I have 3 licenses' for g729 from Digium. "show translations" verifies that the registration took place. When I place a call, having "allow=g729" as the only allow option in iax.conf, I get the following error: WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by 208.139.204.228: Unable to negotiate codec If I place a

The situation is one of my asterisk servers is behind a NAT firewall and one is not. Both servers have multiple IAX peers. The NAT firewall has port 4569 mapped through to the asterisk server behind. But, the natted server is almost permanently unreachable from this non-natted server, even though, the non-natted server is almost permanently _reachable_ from the natted server. Details are below

The past two days, I've been having issues with my two VoIP service providers where calls just suddenly hang up. The following is from the log: Mar 14 13:50:55 WARNING[5887] chan_iax2.c: Max retries exceeded to host 64.34.45.100 on IAX2/voipjet-3 (type = 6, subclass = 11, ts=250000, seqno=80) Mar 14 13:50:55 DEBUG[10428] channel.c: Didn't get a frame from channel: IAX2/voipjet-3 Mar