similar to: Re: DUNDi .... Halfway and CLUSTERING

I understand what you're saying now. While I have absolutely no proof of this, I have to believe that it's something they've solved. I've got several production systems (since early December of last year) using the type of cluster that I'm talking about, and I've yet to hear of any issues that could be related to this. I also did extensive testing both in the lab and at

This is mostly in a traditional pbx-like setup. That is, these are individual remote offices of a larger corporation each with their own cluster (or clusters, in the case of one site). So there is no NAT, and it is an Asterisk-only solution (at least insofar as telephony software is concerned). Regards, - Brad _____ From: asterisk-users-bounces@lists.digium.com on behalf of David Thomas

At the moment I'm out of the office, but when I return I'll be certain to do that. Note that my solution is different from what you are working on with regexten, though I suspect some of the challenges that I've faced and overcome are not. I'm actually using UltraMonkey for load-balancing and failover of the Asterisk boxes, and my dialplan is set up so that it need not be changed

Doug, I feel your pain. I have, since 3 days ago, all but giving up on dundi in a enterprise/carrier core scalable environment, mostly due to no ability to summarize dial plan routes across several servers that may or may not have contiguous extensions registered across the cluster. Example server 1 has exten 1234, 1235, 1001, 1002 registered and server 2 has 1236, 1237, 1003, 1004. But also in

Is it possible for you to explain in more detail the situation involved. I'm still thinking that what you're trying to achieve can be done at least with the help of DUNDi weights, but I still don't think I have a full grasp of the solution you're crafting. Regards, - Brad -----Original Message----- From: asterisk-users-bounces@lists.digium.com

> -----Original Message----- > From: Watkins, Bradley [mailto:Bradley.Watkins@compuware.com] > Sent: Thursday, June 15, 2006 10:36 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] DUNDi Not Able to > HandleComplexFailoverSituations > > > Is it possible for you to explain in more detail the > situation involved.

Well, I've been dicking around with DUNDi for about 4 hours now. I have two systems that I am trying to get to peer with each other. Queries are working one way, but not the other. The server, pbx1, that is refusing to deliver any queries and logs what's below to the console. Why??? I've checked all the config files more times than I can remember. The 'RFC' for DUNDi at

Does anyone know where I can find some good DUNDi docs? The ones are dundi.org are absolutely horrible. The examples in dundi.conf are pretty much useless. I still can't figure out why Digium can't write some good documentation. It's their 'baby' after all. This really drives me nuts and pisses people off in general. I've been dicking around with DUNDi for over 6 months and

Who said I was a C programmer? -----Original Message----- From: Terry Wilson [mailto:otherwiseguy@gmail.com] Sent: Wed 6/14/2006 6:03 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: Re: [Asterisk-Users] DUNDi Not Able to Handle Complex FailoverSituations pbx/pbx_dundi.c in dundifunc_read(). shouldn't be too hard to have it set some variables (i.e.

Yes, nice website. But, where's the documentation regarding setup and configuration? Where's the examples? -----Original Message----- From: Olle E Johansson [mailto:oej@edvina.net] Sent: Sat 3/11/2006 1:23 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: Re: [Asterisk-Users] Clustering / Dundi 11 mar 2006 kl. 07.54 skrev Douglas Garstang:

Greetings list, There have been quite a few posts on the list over the last few months about using DUNDi to ensure users are always reachable even when logged into different asterisk boxes (as part of a load balancing cluster). For example, yesterday, this was in a post: (Olle Johansson) " In combination with Dundi and the regexten= system, it's even more dynamic." Are there any

I'm looking at finding a way for my Macro(dundi-dundi-test,${ENTEN}) when I dial out on the dundi-test network to return a +101 to my [dundi-test-out] context, if the number being dialed on the dundi-test network does not exist, then I will route the call out using my pstn or voip connection i have. I have a feeling it will have to be the switch => DUNDi/dundi-test that will have to return

Dear community, Please help. I've been looking around the internet (and in this great forum) for help with DUNDi setup between servers (I'm using Elastix) and while I can get my servers to lookup extensions on each other very well, I have not been able to successfully make calls between servers. For my test environment, I have 3 servers setup for now, and these are the steps I've

>From the reading and testing I have done it doesn't look like SIP supports a username and password in the Dial string. I currently have the following mapping. priv => dundi-extens,0,SIP, dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial On the sending side I see NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi' and not

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

Hi All We're getting to the point where we need to start increasing capacity on our asterisk servers. I've had a look at the DUNDi J Richardson white paper and it seems pretty straight forward. My question is have any of you implemented this solution in a production environment? Regards Ish -- Ishfaq Malik Software Developer PackNet Ltd Office: 0161 660 3062

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

Are there DUNDi CLI commands for Asterisk 1.4? I have searched google and I only see the dundi commands in Asterisk 1.6, although I see reference to them in older version's of Asterisk such as Asterisk 1.4 here: http://www.asteriskguru.com/tutorials/cli_cmd_14.html. When I view the CLI commands through help I don't see any of the dundi commands and there are errors when I run a command

Greetings list, I've been using DUNDi for some time now to prevent calls between users going out via PSTN if there's no need, set up as follows: [macro-dundi-e164] exten => s,1,Goto(${ARG1},1) include => dundi-e164 [dundi-e164] include => in-e164 switch => DUNDi/e164 My outbound call macro tries [macro-dundi-e164] first, if that fails then goes onto PSTN connectivity.