similar to: Newbie needs audio help

Hi, the first thing I did with Asterisk is listening to `demo-congrats' by Xlite on the same machine. This works perfectly. The config files are those shipped with the package. Now I want to listen to it over ISDN/Capi but I don't succeed. My `capi.conf' is like show in many tutorial on the web. In `extensions.conf' I just added the following lines: [capi-in] exten =>

[Something seems to have went wrong with my previous posting. It appears on the archive page in another thread. I did not receive anything myself. So I may give it another try:] Hi, the first thing I did with Asterisk is listening to `demo-congrats' by Xlite on the same machine. This works perfectly. The config files are those shipped with the package. Now I want to listen to it over

I'm having a problem with my Cisco 7960 phones with the SIP image. When i try to dial a international number i keep getting a busy signal but i dont see anything on the asterisk console (-vvvvvvvvvc) like i do when i dial local or long distance numbers. It makes me think the phone is doing this and not sending the request. I tryed blanking out the dialplan.xml with the below config.

Hi all, I?ve ran into a problem regarding D-channels. I have setup Asterisk (CVS-HEAD-03/21/05-16:41:57) on RH Fedora Core 3(2.6.10-1.770_FC3) I also have a digium wcte11xp card for connetivity to the PSTN(E1). When I start zttool i see that Current Alarms changes between Recovering and Blue Alarm/Recovering. I started to see these problems after i moved the digiumcard from one PCI slot to

Hello I have an Asterisk 1.4 server and two XLite softphones, where Asterisk and the local XLite phone are located in a LAN behind a NAT router, and the remote XLite phone is located elsewhere on the Net behind its own NAT router: http://img252.imageshack.us/img252/3749/asterisknat.png I'm having the following issue: When the _local_ XLite calls out the remote XLite, everything works fine;

Hi, I've got an Asterisk box with grandstream and xlite clients on it. No here's the thing: - I grey out all the codecs on the Xlite except for GSM - I call the Grandstream from the Xlite, the Xlite uses the GSM codec and the Grandstream uses ulaw, with Asterisk doing the conversion, everything fine - I call the Xlite from the Grandstrea, the Xlite ends up using the ulaw codec as

Asterisk version 1.2.14 I use snom190 and xliteV3 as sip phones. asterisk send the rtp stream never to the xlite softphone. Any hits for me? *CLI> rtp debug RTP Debugging Enabled -- Executing Dial("SIP/xlite-007918f0", "SIP/snom") in new stack -- Called snom -- SIP/snom-00797110 is ringing -- SIP/snom-00797110 is ringing -- SIP/snom-00797110 answered

Hullo :) I'm using CVS-04/23/04-23 from the stable 1.0 branch on kernel 2.6 - since I have no Digium h/w, I've just managed to get the zaprtc module to compile and run, so I thought the best way to test it would be via MoH. The MP3Player application works great .. exten => 6901,1,Answer exten => 6901,2,MP3Player(http://127.0.0.1:85/ES/28) This will play callers BBC Radio 4 from

Hello! I bought a virtual IP line to my ISP to use with my asterisk but when I try to connect it to my ISP tells me I can not use and I can only use with a softphone that gives me, xlite ready configured. I use ngrep to see what information sent on xlite for communication, the User-Agent was changed so I change the User-Agent to my asterisk to the same as saying the xlite but still does not work.

Hello I thought I had things set OK to have Asterisk play FR files for prompts and MOH, but for some reason, it still can't find them: ============ ll /var/lib/asterisk/sounds/ drwxr-xr-x 2 asterisk asterisk 4096 2011-01-21 16:18 custom/ drwxr-xr-x 10 root root 61440 2011-03-17 14:21 fr/ Note: fr/ contains core + extra + moh as downloaded from here:

Dear all, I have tried to run an asterisk instance together with XLite on a single machine (a PowerBook). The intent is to take advantage of IAX connections to easily cross NATs while traveling. While the IAX setup proved 'easy', just having to fiddle a little with working configs at both sides, I did not succeed so far in getting XLite to connect to the local Asterisk server, AND be

I have a bunch of road warriors who I've set up with Xlite clients. Unfortunately the sound quality has been intermittent at best. Sometimes it's great other times completely unusable. When it's bad one usually hears harsh static when the other party speaks or their voice gets "clipped" to static if they speak too loudly. Many of these users have migrated to Skype ? much

Hello I use the Linksys 3102 to connect Asterisk to a POTS line, and XLite on XP as an SIP client: http://img694.imageshack.us/img694/1421/3102asteriskxlitecid.png The problem is that by default, Asterisk doesn't rewrite the CID name + number in incoming calls, so that XLite displays whatever name I used in the 3102 and the extension the 3102 uses to register with Asterisk. How can I tell

I have an asterisk server behind NAT - no audio on the test external calls I have tried making so far. Read http://www.voip-info.org/wiki-Asterisk+SIP+NAT+solutions - No solution evident from there, sounds like I have case 9. I would have thought that all I would have to do is port foward and have the external IP on the asterisk server, which I have done I have fowared 5060UDP, 8000UDP, and

Hi, I'm wondering if anyone has experienced an issue with the XLite softphone and asterisk accepting dtmf? I can listen to my voicemail perfectly from my hardphone. However when I dial the voicemail number from my XLite softphone and enter the password at the voicemail prompt, an error appears vm-incorrect and I get an "Unable to read password" message on the asterisk console. Has

Beginner to Asterisk, but not beginner to VoIP FreePBX front end running on a dell 1550 and XLite running on a different Woindows XP box Both boxes connected via switch on same subnet. No NAT involved On FreePBX I created a new extension 1001 with a SIP password of 1001 On Xlite, username is 1001, password is 1001, authorization user name is 1001, and domain is IP of Free PBX XLite tries to

Dear All, I have downloaded the xlite version 2.0 for windows and I made the following conf in the xlite itself as the document suggested in order to make it work with Asterisk but still it doesn't work as a matter of fact when I tried to make a tcp dump I can see no packets going between the windows client and the Asterisk server at all, here is the my conf on the xlite itself: in the

Helo List, First I would like to apologize for my bad spelling as well as that I did not search the wiki first. I only have email access at the moment. I am having trouble setting both variables and global variables thru an extension. I am using Asterisk 1.2.4 with Ztdummy on CentOS 3.4 with an Xlite softphone. I have two xlite phones on diffent computers. One logs in as xlite1 and the other as

Hi guys i signed up to iconnect a few hours ago to try do some cool stuff. but im having a few problems. Im running asterisk and xp/xlite softphone.. both xp box and asterisk box are on public ips. The problem is that when i ring anyone in the world it'll ring they'll pickup and i can hear them 100% perfectly/clearly.. but they cant hear me.. occasionaly they can hear something like a

Hi guys, I'm testing the sending of a URL to an XLite softphone when a call is in queue. See the output of the CLI below: -- Executing Queue("Zap/69-1", "q_sample|tT|http:// www.google.com/") in new stack -- Started music on hold, class 'default', on Zap/69-1 -- outgoing agentcall, to agent '1000', on 'Local/ 1000@agents-1b94,1'