similar to: ooh323 Gatekeeper Bug

All, I've fixed my problem getting Asterisk ooh323 channel to stay registered with my Cisco IOPS gatekeeper, now I need to get dialling working. I have the following: [Asterisk with ooh323] ----h323---- [Cisco IOS GK] ----h323---- [Radio system OpenH323] 192.168.1.5 192.168.1.6 192.168.1.7 the Asterisk box has numbers

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified

OOH323 Debugging Enabled -- Executing Answer("SIP/3513-090f7d40", "") in new stack -- Executing Wait("SIP/3513-090f7d40", "1") in new stack -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1: line:58 - IDCONFIG : 1

I'm trying to connect an Asterisk 1.6 to an Avaya with gatekeeper (CLAN). When chan_ooh323 first loads it tries to establish a connection with the gk but I it fails. I have the following extract from the ooh323 log. Can anyone give some insight? Thanks! MD 23:02:59:045 Sent GRQ message 23:02:59:045 GkClient Received RAS Message 23:02:59:045 Received RAS Message = { 23:02:59:045

Greetings to All, I hope someone has already gotten this working. I spent all day today trying to get ooh323 and gnugk to run on the same box. After a lot of tweaking to get everything compiled, I got both up and running. I can make calls IAX to H323, but cannot make calls in the reverse direction. I have tried many different configs on the GK, but always come up with the same error. It appears

Hi, I'm trying to make ooh323 works with one asterisk box running 1.2.15 version. I can ring from a h.323 to SIP and SIP to H.323, but when the call is finished when the phone is answered. This is the log when I call from the H.323 device to a SIP device: Feb 23 10:57:32 VERBOSE[6096] logger.c: -- Executing Dial("OOH323/Telconet Mantaer-c5f8", "SIP/666|30|TtrwWC")

hello every body, i have big problem to configure h323 trunk between cisco router and asterisk 11.13.1 which uses ooh323 module. any body knows if ooh323 module can work with cisco routers or not???? (in gateway mode, it is ok and register in cisco gatekeeper but i can not configure trunk h323) any comments or hints are really appreciated. SAM -------------- next part -------------- An HTML

has anyone managed to get these three beasties to work together ? we're using ooh323 from asterisk-addons-1.2.2, asterisk 1.2.6 and microsoft netmeeting default from windows xp. the symptoms are that calls from a SIP client to NetMeeting rings on NetMeeting, but upon answering the call in NetMeeting, no audio is passed between the two. eventually, the call times out and hangs up. on a

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

Dear All, I am currently have this problem in which I am sending call out from the Zaptel TE405 to a VoIP gateway. But the problem that the call over to the VoIP Gateway will always have a fake ring tone. Can you please give some pointer how to fix this problem? This problem is existing in my Asterisk 1.2.1 box. Also when compiling Asterisk 1.2.5 and tried to run it with the Asterisk-addon,

Dear All, Sorry to be posting again. I have solved my problem. The problem is that when exiting from the macro, the priority number is still in effect. For example, priority 1 is at the start before entering macro after the macro the priorty will be 2. Since there isn't any other dialplan command, the switch statement would be search for a priority 2 in the Realtime extensions table. One

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

hello Dmitry thank you for your reply. Ok, you are right. i want to configure trunk h323 between asterisk 11.13.1 and 2800 cisco router. this is my scenario: PBX(100)--->cisco--->asterisk11.13.1---->PBX(200) when i call from 100 to 200, everything is ok but when i call from 200 to 100, phone rings but after i answer it, i have no voice and call terminates after 5 seconds. this is

Hello all, I have seen some people asking how to configure asterisk to work with h323 but i did not manage to do fix it yet (i am not an asterisk expert). Can someone help me configuring asterisk? It is already compiled asterisk 1.4.5 with H323 support. Everything looks fine. Then i understand i need to configure several files: -sip.conf -ooh323.conf -extensions.conf do i also need to configure

Hi, I have two asterisk servers where softphone A is connected to asterisk A. On those two asterisk servers, ooh323c is installed. I tried to call a "test" context on asterisk B from softphone A. But I always fall into context "default" of asterisk B. ( I don't know how to tell asterisk A extensions.conf to call asterisk B "test" context) Here are conf

All, I'm haveing a bit of trouble getting my head around H.323 and call routing with Gatekeepers, Zones and intra-zone calls - hopefully someone who is more informed in things H.323 will be able to point me in the right direction...? I already have a mature network of Asterisk boxes dotted around the UK and overseas with hundreds of extensions and our own number-plan/dial-plan in the form

Stephan, Ok, I'll re-state the problem... I have two devices that I want to talk to each other: 1. an Asterisk PBX 2. a Damm Cellular TETRAFLEX digital radio system (www.damm.dk) both devices are effectively "gateways" because they have many subscribers behind them. The Damm Cellular system controller is based on Windows-XP Embedded and its sub-systems used the OpenH323

Hi, I'm trying to configure Asterisk as SIP-H.323 Gateway via ooh323, but I have an error relatively to the GK Confirmation message. >From the log: "H323 RAS channel creation - succesful Sent GRQ message Gatekeeper Confirmed (GCF) message received ERROR:No Gatekeeper ID present in received GKconfirmed message Ignoring message and will retransmit GRQ after timeout Error: Failed to

Dears; I am having same problem, that when I place a call from the H323 end point (even if it is not added in the ooh323.conf), then asterisk handle the call and play the wave file in the default context. Also I added endpoint to the ooh323.conf and same thing, it keep goes for default context whatever the context placed. My Asterisk vesion is 1.4.25 My Asterisk add-on version is: 1.4.8 What I

Can someone tell me how I can configure ooh323.conf to accept call from h323 gateway (only the authorized h323 gateway) to my asterisk. I will be glad to know how this can be done. I tried the setting as in ooh323.conf [abcd] type=user context=default ip=62.193.1XX.2XX disallow=all allow=gsm allow=ulaw this gateway can make call, even if these lines are commented out and you restart the