similar to: cisco 7912 not taking config

Hi all, I'm trying to convers some Cisco SSCP phones to the SIP formware. The phone boots, I see it tries to fetch a bunch of files on my TFTP: Jun 17 09:37:45 firewall dnsmasq-dhcp[21202]: DHCPACK(eth2) 192.168.10.103 6c:50:4d:da:f0:67 SEP6C504DDAF067 Jun 17 09:38:10 firewall in.tftpd[22666]: RRQ from 192.168.10.103 filename CTLSEP6C504DDAF067.tlv Jun 17 09:38:10 firewall in.tftpd[22666]:

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified

John; I'm trying to flash 7.1. What I followwd was the wiki page you refer to. My real question is do I need the .load file tftp debug shows the 7960G is asking for? Voipsupply didn't supply it. I'm trying to verify that's what I need befor I start hounding them. -JB Hawaii John Bittner wrote: >John, > >You have to go to 7.1 before 7.3 >Also look at this.

Machine using HP DL380 Gen9 server Initially I got problem where boot hung at My IP 0.0.0.0 Then I referred to http://www.syslinux.org/archives/2015-June/023641.html And used the patch provided then it again hung but at different step Getting cached packet My IP 192.168.103.41 (hung here) >From /var/log/messages Oct 7 01:16:10 foreman in.tftpd[43905]: RRQ from 192.168.103.41 filename

hello list, I am trying to setup a PXE boot server. Below are the details of the server: OS : Fedora Core 5 32-bit DHCP : dhcp 4.1 TFTP : tftp-hpa-5.0 Number of NIC : 2 eth0 : IP : 192.168.100.17, Subnet : 255.255.255.0, Gateway : 192.168.100.1 eth1 : IP : 192.168.1.1, Subnet : 255.255.255.0, Gateway : 192.168.1.1 Client: OS : None, fresh machine Number of NIC : 2 Intel Gigabit eth0 of server

Anyone else seeing problems doing pxe boots off the latest dag/rpmforge syslinux packages? Versions 3.35 works, doing the tftp request like this: Jun 18 06:01:19 boothost in.tftpd[25947]: RRQ from 172.16.0.26 filename /centos5-i386/pxelinux.0 Jun 18 06:01:19 boothost in.tftpd[25947]: tftp: client does not accept options Jun 18 06:01:19 boothost in.tftpd[25948]: RRQ from 172.16.0.26

Hi, i'm trying to boot an 135mb acronis iso image with syslinux but have no luck, client gets stuck[1] a few seconds after selecting the image - i used linux memdisk initrd acronis/acronis_home_2010_multi.iso append iso tftpd-log shows: Mar 25 14:45:15 smbsrv in.tftpd[18837]: RRQ from 192.168.0.102 filename pxelinux.cfg/default Mar 25 14:45:15 smbsrv in.tftpd[18838]: RRQ from 192.168.0.102

Here is a cut and paste from /var/log/messages from our TFTP server Aug 25 05:45:32 SALES in.tftpd[3206]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3206]: tftp: client does not accept options Aug 25 05:45:32 SALES in.tftpd[3207]: RRQ from 10.0.0.223 filename pxelinux.0 Aug 25 05:45:32 SALES in.tftpd[3208]: RRQ from 10.0.0.223 filename

Gene wrote: > On Wed, Oct 7, 2015 at 7:58 AM, Ashish, Shivendra <shivendra.ashish at hpe.com> wrote: >> Still getting error >> >> Disable uderdefault address > > 1) I'm presuming this is actually "disable UseDefaultAddress" > >> Core_udp_sento: udp->configure unsuccessful >> >> This message lopping in console > > Not

Hi I have a problem with our pxelinux server, the server works for month without any problems. We use syslinux-3.51 version on an FC2 with in.tftp. Today I want to install a new server, but it fails after loading the kernel and booting stopped with this message ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered

I've found a problem, and I think it is in syslinux (specifically when it tries to load ldlinux.e64 under hyper-V). I have a physical computer with a Gigabyte GA-P85-D3 motherboard that successfully pxeboots using the EFI images, and I hold that up as exhibit 1 that my deployment environment works. It also implies that the syslinux.efi image works in some cases, but not in all. My Hyper-V

Hi, We currently use pxelinux and tftp-hpa for pxe booting new machines and installing our OS of choice. This has worked great for the past year, and just about every HP laptop we've tried so far has worked flawlessy, until now...? We recently bought a bunch of HP ProBook 6570b laptops but couldn't get them to work with our pxelinux setup. What we see is that the 6570b stops at the

Op 2013-08-26 om 09:35 schreef John McDonnell: > On Behalf Of Geert Stappers > Sent: Sunday, August 25, 2013 6:42 AM > > > > On my previous TFTP server I had logging. I did see all requests > > in logfiles. > > > > On my current TFTP server I have also added the options '-v -v -v', > > but no logging. At least I can't find it them in

Hi, I am trying to boot the PXEclient via pxeserver and I am getting an error "file not found", following are me setup in the /tftpboot: /tftpboot: initrd.img linuz pxelinux.0 /tftpboot/pxelinux.cfg default (lower case) in the default file: # This is the default pxelinux config file. LABEL test KERNEL vmlinuz APPEND

I'm setting up UEFI booting and got to the point of having the system talk to the dhcpd/tftpd server, grab the first image files (syslinux.efi) and then continuously request the secondary image file (ldlinux.e64). I'm wondering if I'm missing something or if someone can point me in the right direction of trouble shooting this. The tftp root has all the files to boot a BIOS type

I am trying to convert my 7905G to be SIP based and seem to be running into a few hassles. Below are all the config files and logs from the server. I have tried to follow the pdf's from cisco and some posts from other mailing lists that google turnedup, but it seems that nothing is working. Am I somehow missing a fundamental step in trying to upgrade from Call Manager to SIP? Any help is

Okay guys, This is separate from my last few messages. Along with those attempts, I decided to migrate from pxelinux.0 to gpxelinux.0 in my existing setup. Admittedly I haven't tried previous gpxelinux.0's but I am willing to if someone thinks it would be useful. Everything works as expected with pxelinux.0 of the same version. With gpxelinux.0: TFTP Prefix: Trying to load:

I am trying to tftp from a cisco router on my lan, but it is not working. All I see are these errors in the log. I can "tftp localhost" without a problem as well. Any suggestions on what I can check next? I don't see too much troubleshooting available search via google. Thanks. [root at 170 chadr]# uname -a Linux 2.6.16-1.2111_FC4 #1 Sat May 20 19:59:40 EDT 2006 i686 i686 i386

> I am trying to setup a PXE server for two Debian releases (stretch and > buster) using their respective network boot images (netboot.tar.gz), > which I extracted into subdirectories of the TFTP server's root directory: > > ??? ??? debian > ??? ??? ??? buster > ??? ??? ??? ??? debian-installer > ??? ??? ??? ??? ldlinux.c32 -> >

Very sporadicially (1 out of every 40-5000 boots), our blade system will hang indefinately while PXE Linux is attempting to locate it's configuration file. This is causing our automated testing to hang and generate failures. I have put more details below. My concerns are threefold: 1) System hangs 2) PXE Linux bootstrap never seems to retry the transaction 3) PXE Linux bootstrap never seems