similar to: MWI to 7960's sometimes delayed or lost. Please advise.

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

If it's already been covered, please forgive the repetition. I searched Mantis, but couldn't come up with anything. We upgraded to Asterisk 1.2.6, and suddenly the Polycom MWI stopped working on SP IP 300s and 600s. All of them. I tried splitting the friend entries in sip.conf into user and peer. I made sure the context of the voicemail box was on the end of the mailbox option in

Hi, I just migrated my Asterisk installation from 1.2.1 to another server with 1.2.8. Among a lot of things, I copied the whole content of /var/spool/asterisk/voicemail/default directory. All is OK but now I'm not able to see MWI indication for new messages on all my Grandstream GXP2000 phones (before migration, it worked). Peraphs do I missed something? Thanks -- Domenico Viggiani

The 7960's have an envelope that appears in the display next to a line which has voicemail. Also, the MWI light is a logical OR of all the defined lines. Is there a way to tell the phone NOT to display the MWI for certain lines but retain the envelope for all? If you get enough VM on busy lines then the light tends to lose meaning and you may as well have it on all the time! I'm

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

I am having a problem with the message waiting indicator. We are currently using the ast_data modules for both our sip configuration and our voicemail configuration. In the mailbox field I have tried using both mailboxnumber@context and simply mailboxnumber. Yet so far I am still not getting a MWI on my 7905's or on my 7960's. My assumption would be that I am still missing something,

I'm testing my asterisk system and the realtime backend. My Asterisk build is rather aged, 03/18/2005 CVS. I have successfully moved Sip peers and Voicemail boxes to the realtime database backend and this works very well except for MWI. I don't seem to be able to get MWI to work when I store the voicemail information in a database backend, from a flat file it does work fine. I'm using

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Hey all...I'm trying to find a phone that will support multiple MWI so that I can have a shared central phone with say 4 users who can see visually that hey have messages waiting. Is there any phone that will do this possibly by re-assigning a soft-button? Can the Polycoms do this since those seem to be the phone of choice these days? Thanks!

All, I am running the following setup: Linux 3.10.0-123.4.2.el7.x86_64 #1 SMP Mon Jun 30 16:09:14 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Asterisk 12.4.0 Cisco IP Phone 7960G I have an issue with MWI. For some reason after I delete my voicemail messages, the MWI of the phone is ON for another 20-30 minutes. It seems that there is a poll interval of some kind. I am not sure whether it is a

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

hello, I read http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large anybody could tell me more about this ? Is it available with ARA ? Regards Harry Method 3 Q: If you have your SIP phones registered with SER but your voicemail is handled by asterisk, how do you get the MWI (Message Waiting Indicator) light to function on the phone? A: In sip.conf create a section pointing at your

MessageMelissa - I added the "fromuser=AnyName" to my sip.conf file stations and that, in fact, corrected the problem. The MWI now works flawlessly. I would recommend that Aastra/Sayson pursue this with the Asterisk team so that it is listed as a known issue or to have Asterisk patched to fix it. I will submit a bug on it as well. I'm copying the Users Mailing List on this. For