similar to: IAX / Firefly handshake problem

Hi All, I'm having problem with IAX, I'm trying to connect to speex.co.il from asterisk using: register => username:password@speex.dyndns.org and I cant get it to work. Maybe someone who already got this to work will help... When dialing my speex extension I see the next output from consol: IAX2 Debugging Enabled *CLI> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno:

Hallo Did you allow udp outgoing on 4569 as well.. i found udp bit different than tcp when comming to firewalls liaan ----- Original Message ----- From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws> To: <timebandit001@gmail.com>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, February 21, 2005 12:29

I downloaded iaxComm and get up my iax.conf file and the extensions.conf. Here is the out but from CLI in iax debug. What did I forget to do??? Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00001ms SCall: 10489 DCall: 00000 [192.168.50.66:4569] USERNAME : 100 REFRESH : 300 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:

Hopefully this is really a generic question about IAX and doesn't turn out to be something specific to Teliax, because they haven't been too helpful so far. All they can tell me is that my login shows "status unknown" on their end, which prevents me from receiving inbound calls on my Teliax number. Outbound calls through the same server work fine, which rules out most networking

Hi, My termination with sixtel stopped working, is it something I did or anybody else is having the same problem. I am attaching log: *CLI> -- Executing GotoIf("SIP/300-fbe0", "1?4") in new stack -- Goto (macro-dialout-default,s,4) -- Executing GotoIf("SIP/300-fbe0", "1?6") in new stack -- Goto (macro-dialout-default,s,6) -- Executing

For some reason, starting just today, 1 out 3 of my asterisk servers is having issues calling 1 other server. The only issue I see is that when it registers with the problem server it is using port 1027, not 4569. ie: Registered to 'Server 1', who sees us as 'Server 2':1027 Server 1 then proceeds to timeout trying to register with Server 2. The way I have each server registering

I'm new to this list, and I apologize if this is an already answered question, but my Google-fu was not strong enough to find the answer if it was. I'm having a problem with DTMF on incoming IAX calls. For the first few seconds of the call (between maybe 1 and 15, it varies from call to call) everything works fine. After that I continue get DTMF_E messages from the remote IAX server

I know in advance maybe I'm overlooking something stupid, however I'm really lost and cannot find the solution... Situation: - asterisk-1.2.13 on a linux box with no iptables active. - one iax2 peer defined - one wildiax phone running on my laptop the soft phone is configured to connect & register on asterisk, however, I cannot get it working. What am I missing? Please help!!

Hi everyone, THis is my second thread regarding the issue.(before I was having problems with accessing my email, which slow down my responses, sorry for that) My setup looks like this Firewall | | Asterisk---Asterisk (two asterisk servers with the same setup for high avail) | | phones Ports 5060, 10000-20000, 4569, 5036 are forwared to 192.168.1.251 which is virtual ip address on one of the

hallo, i am really confused how nativ briging is working with asterisk, i use a asterisk server as central server and register another asterisk and an iaxcomm client to the server, all three have public ips on the internet. somtimes, when i call from iaxcomm to my asterisk, the calls go peer to peer (i can see it with tcpdump) but sometimes the get routed through the central asterisk server

Does the MWI feature work with IAX2? I have read where it should but cannot get the indicator to work on any of the IAX softphones that I have tried which have this feature. I even did an IAX debug and did not see where and indication was sent to the phone when it registered. IAX2 registration session: *CLI> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ

Is there any documentation on IAX RSA authentication because I followed http://www.voip-info.org/wiki/index.php?page=Asterisk+iax+rsa+auth and it's not working... Asterisk 1 : -r--r--r-- 1 root root 272 Aug 25 10:34 server2.pub -r-------- 1 root root 963 Aug 24 19:38 server1.key Asterisk 2 : -r-------- 1 root root 963 Aug 24 19:53 server2.key -r--r--r-- 1 root root 272 Aug 25 09:02

Hi, I'm testing an upgrade from 1.4.18 to 1.4.37 in a VM prior to putting it into production. Ive done this by installing 1.4.18 onto the VM, putting my config files in place and then installing 1.4.37 over the top (which is what I'd have to do on production). I've found a few issues in the config files, but nothing I couldn't handle until... I hit inbound IAX issues. My

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

I am having some problems getting TelIax service to work with *. Outbound calls work just fine. When I try an inbound call the phone rings and there is no audio. Upon further investigation "iax2 show channels" indicates that the codec is "unknown" The provider confirmed that they are set for ulaw and so am I. Does anyone have an idea what could be causing the codecs to

I have something going on that I don't fully understand after a weekend of looking for answers. I have an iax account with Tesco that works flawlessly with the Zoiper client - but is giving me trouble with inbound calls in Asterisk 1.6. After some playing I have ended up with an iax.conf file that looks like this: [general] calltokenoptional = 77.75.0.0/255.255.248.0 maxcallnumbers = 16382

I run a phone in a remote office using the IAX2 protocol. It mostly works fine; except that every 5 mins it loses connection with Asterisk, before reconnecting 30 seconds later; rinse & repeat. Using the IAX2 debugging, I'm seeing this a lot: Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE Timestamp: 00018ms SCall: 04050 DCall: 00000

Hi people, i have problem with IAX2 between two asterisk PBX. When i try call some number i get "INVAL" packet, but when i try call same number via OpenVPN (is between this two asterisk) call is working fine.So i debug communications and here is my opinion ... Schema of connection: Asterisk1 -> ADSL router with NAT -> INTERNET -> Asterisk2 A)Calling directly via public

Hi Guys, I have already tried this one on the developers list. I have not been successful getting much back there and I have notified them that I will post this on the users list instead. Hopefully somebody have tried something similar and can help out. I am developing AGI scripts on Asterisk and have run into some very strange behaviour and I think this is a bug, but I am not completely sure.

============= SJphone Log ============ Outgoing SIP session Respondent: (sip:8612@192.168.2.2) Remote client: Started: May 26 16:33 Accepted: no Ended: May 26 16:34 End reason: Call rejected: 503 Service Unavailable =============== Asterisk Debug ================ Executing Dial("SIP/2201-a83e", "IAX2/<FWDNUMBER>:@iax2.fwdnet.net/612|60|r") in new stack --