similar to: 7970 Configs

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

Hello list, does anyone know how to change the "interdigit timeout" when using Cisco IP Phone 7940/7960 with SIP-Firmware and Asterisk? it's default value is 15 sec. but i have nothing found to set this in tftp-config file etc. Thanks in advance, Roland

Hi, My apologies for the OT. My googling came up empty and hopefully there are some members in the community that could give me a hint how to solve this issue: Cisco 7961 with SIP firmware 8.3.3. Needed to downgrade it to 8.0.4SRS2. The downgrade process started off good. The 7961 got it's IP address via DHCP, found it's SEP<mac>.cnf.xml file and started to "upgrade"

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

> On a related note, how do you get a Cisco 7940 to dial numbers with a > hash in them, instead of just using the hash as a dial key. For > example, I have *#21# to check diverts, but the phone will just dial > "*" as soon as you type the # after it. <DIALTEMPLATE> <TEMPLATE MATCH="#..." Timeout="5" User="Phone" /> <TEMPLATE

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I've been playing around with a cisco 7940 phone. It seems to like talking to Asterisk with the chan_sccp plugin. The only problem is that it tries to call out to a SEPXXXXXXXXX.cnf.xml file to verify it's configuration. I've found docs for SEP*.cnf files, but not .xml ones. Does anyone have a .xml file for a 7940 (Skinny?) phone that I can start with? ...Jeff

- How to restart the phone? (On 7960 it is *+6+Settings) - How to setup working dtmf? - How to setup hinting? For line is <line button="4"> <featureID>9</featureID> ... For speeddial is <line button="5"> <featureID>2</featureID> <featureLabel>341</featureLabel> <speedDialNumber>341</speedDialNumber> </line>

On 7/23/2023 12:32 PM, Dirk-Willem van Gulik wrote: >> On 22 Jul 2023, at 23:40, asterisk at phreaknet.org wrote: >> >> I'm assuming you mean at the device level, and that you want to send >> only the relevant header to each device? >> Use pre-dial handlers; a unique handler runs on each destination >> channel. With PJSIP, you're forced to do this

I run a SIP-only shop with a 23 channel PRI and single T100P. Here are my configs: /etc/zaptel.conf: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us /etc/asterisk/zapata.conf [channels] context=default switchtype=dms100 signalling=pri_cpe pridialplan=unknown rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=no hidecallerid=no callwaiting=no

> On 22 Jul 2023, at 23:40, asterisk at phreaknet.org wrote: > > On 7/22/2023 4:51 PM, Dirk-Willem van Gulik wrote: >> We have a couple of parallel ring settings (and this has worked well for eons). >> >> Either in the form of >> >> same => n,Dial(SIP/1001 & SIP/1002 & SIP/1003 …..) >> >> Or via a subroutine (below) that has a bit

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

Does anyone know what triggers the 7970 to update its config? I was able to get it to update to SIP, but the config I used initially won't go away. I am making small changes to the SEPxxx.cnf.xml file and rebooting the phone, the phone is downloading the (TFTP) new config file, but I don't see any change on the phone itself. I've looked at the VersionStamp and incremented that, but

Is there a way to make the Cisco 7960 SIP phone dial out automatically without having to press the dial button, once the numbers that you have entered match a specific pattern? This feature is present when the phone is working with a Cisco CallManager. For example, if all of my internal extensions begin with a '5' and are four digits long, if I dialed '5123' on the phone, the