similar to: indications & SIP

I'd planning on install Asterisk on a hosted Linux box we're setting up. The hosting provider that seems to offer the best deal can install either Debian 3.1 or SUSE 9.x or 10.0 in either 32 or 64 bit editions (running on AMD 64 bit). My experience has been gained on RedHat to date, but I do have some SUSE experience. I assume I'll have no problems running Asterisk on SUSE, but

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. > Thanks Olle, > > So am I to understand that you

Fellow list members, I have run into an issue where I encounter a delay at the beginning of a phone conversation when I make outgoing calls through Asterisk with an Aastra 9133i hardphone. This is most noticable when I call a voicemail system with the Aasta and then with a land line or other VoIP phone. The first word or two of the voicemail message is generally cut off. According to

I am trying to make an Inalp Smartnode 1200 (SIP-to-ISDN gateway) work with Asterisk. It works ... Partially. We are using the Inalp to connect ISDN phones, it basically acts like an ISDN ATA. First of all, when I make a SIP call to the unit with a simple Dial() command (no "r", so Asterisk shouldn't generate its ringback tone) I hear Asterisk's ringback tone anyway (I'm

My last problem was nicely solved through this mailing list so hopefully this new problem will have the same happy outcome. My situation is that I have many extensions. Here is a sample: [client-phone](!) type=friend host=dynamic secret=XXXXXXXXXX dtmfmode=auto disallow=all allow=ulaw allow=gsm allow=g723 allow=ilbc subscribemwi=no [4165555555](client-phone) secret=xxxxxxxxxxxxxxxxxxxxxxxxxx

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

I am using Asterisk (Debian unstable packages) with an OH323 connection to my provider. Everything is working except for the generation of ringback tones when I receive inbound calls from the PSTN. My provider tells me that we're sending call progress indications and that because of this they're expecting us to generate the ringback tone. Does anybody know how to configure this in

Hi all, I've been trying to get SMS operational on my Asterisk box, which has a TDM400P card with a pair of FXO interfaces configured (ZAP/1 & ZAP/2). I've not had luck with either of my lines, after issuing the command "smsq --motx-channel=ZAP/1/1709400X 00000 register". I see the following output in my Asterisk console: -- Attempting call on ZAP/1/17094009 for

Hello Asterisk users around the world! Recently, I have been working with pretty large Asterisk installations. 300 servers running Asterisk and Kamailio (OpenSER). Replacing large Nortel systems with just a few tiny boxes and other interesting solutions. Testing has been a large part of these projects. How much can we put into one Asterisk box? Calls per euro invested matters. So far,

Good morning everybody, Can someone explain to me the interconnection between these four things: indications.conf, SetLanguage(), zaptel.conf and ring-back ? If there is any !! :- ) I am having this case where some users cannot hear ring back from a DeadAGI script and it seems to be interconnected to these items. These users are from the iaxfriends table, they _can_ hear ring-back from a

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

Have a problem which can't find solution to on WIKI.. Trying to get * to use UK based indication tones. i.e. british ring, dial tone, busy signal. Have changed the indications.conf file to default to UK. However this seems to have no affect. What am i missing. Am using 1.0.3 stable. Many thanks Andrew. ---------------------- indications.conf [general] country=uk [uk] description =

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

Has anyone here implemented "Ring back when free" in Asterisk? The way it works in the UK is as follows: 1. A calls B. B is engaged (busy). 2. A hears "The number you called is busy. To use ringback, press 5" 3. A presses 5, and hears "Your ringback request has been accepted". 4. A hangs up. 5. Later, B hangs up. The system then calls A (if A is now busy, it

I can smile now. I made my * work with my Cisco. Finally. First problem was Ethernet on my Linux. After installing * on a different machine, I got rid of that "icmp udp unreachable" error. My next problem was the call stays on on Cisco gateway, but the ATA drops it. I figured out it was my mistake on dialplan in extensions.conf --- (it took me a day to notice it.. damn!). my config

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

Hi, I am using asterisk 1.8.22 and have a problem when calling in parallel several SIP endpoints and I am not sure how to resolve it. In this case Asterisk will not bridge any audio to the caller before the 200 OK. Which means any progress announcements, including remotely generated ringback, are not passed back to the caller. This behavior is completely correct, because there is no way to know

Hi I can't for the life of me work out why this is not working. When in the campon contect if you hit a DTMF key 2 you get moved to the exten => 2 defined in the mainmenu context not the exten => 2 defined in the campon context. What is wrong? The same happens if you hit key 1. [campon] exten => _*1XXX,1,Answer exten => _*1XXX,2,SetCallerID(${CALLERIDNUM}) exten =>

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

During the recent week, we've worked hard to add more of the contributed international support to Asterisk. A big step was taken yesterday when Mark added international support for saynumber() to CVS. We now have a first version of support for * Danish * German * English * Swedish * Norwegian * Portuguese * Italian * French All of these require that you add your own sound files. There are