similar to: Sipura SPA-3000 in Egypt

Hi All, I'm on of those brave souls who bought into the preproduction beta of the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and am exploring it's workings. I really want it mostly as a straightforward FXO adapter, to replace an X101p. Let me be clear, I'd love to support Digium in every way possibe, and will likely buy a TDM40 card shortly. But, the X101p has

Hi, I'm looking for a full list of xml provisioning variables of the SPA-2100/3000. Currently the Sipura website has example XMLs only for the SPA-841 [1] and SPA-941 [2]. I'm mostly interested in the CallerID type selector variables and whatever variables control the PSTN<->VoIP settings. Sipura Configuration website form field names are numeral only. :( [1]

Hi all, Anyone able to remotely reboot their password protected Sipura SPA-3000 from command line. I am trying: Sipura SPA-3000 from command line: # wget http://admin:mypassword@192.168.1.55/admin/reboot The strange thing is it works fine when I go to http://admin:mypassword@192.168.1.55/admin/reboot with my web browser... Thanks....

Hello, I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and I've run into a couple of questions I haven't yet found clear answers to: It appears that the SPA-3000 has no call progress on it's FXO interface? Asterisk considers a dial() as answered when the SPA-3000 has dialed the number on the PSTN line, not when someone has answered a phone on the

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

I heard Sipura had really awesome documentation on the SPA-2000 and SPA-3000, but you have to email them for it. When I did, they said I had to get it from a reseller. It's been a while since I bought my units, I don't even remember where or who they were bought from. Can somebody email me the documentation for these devices? I'm quite interested in knowing what every one of their 200+

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN

All- I'm attempting to set up a Sipura SPA-3000 in Sao Paolo, Brazil. Not being a portuguese speaker, I'm having a rough time of finding the relevant information on how to make the thing pick up the PSTN line and make an outbound call. The sipura in question works fine on a bench connected to a POTS line in the US, but is now plugged in in Sao Paolo. The immediate thing I notice is that

Hi all, I was wondering whether anybody here would help me clarify this minor issue please. If I have the following setup; Asterisk ------ Sipura SPA 3000 (fxo) --------- Pstn Line Would a call coming in on the pstn line be answered by the ATA or just get passed through to the * server (depending on dialplan) to handle? So basically, the caller does

Hi there everyone! I've bought a Sipura SPA 3000, and succesfully connected it to my Mac, where I installed Asterisk 1.4.0. Both ports (FXO and FXS) are well configured). However, living in Brazil, I'd like to know if there are optimal settings to my PSTN that I should enter into the config of the device. I experience a little bit of echo on the FXO probably because I raised the gain of

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Sorry to bug all of you with this, but I have to assume there are a number of Sipura experts here... I have a Sipura SPA 2000 that I've been using for nearly 2 years now. It's flashed up to firmware 3.1.5. On line 1, I no longer get Caller ID (it used to work, and I can't remember when it stopped). On line 2, I always get Caller ID. To my old eyes, _every_ switch on both lines

Hi, I'm using the SPA-2000 with firmware 1.06 on the Asterisk PBX, which works great for taking and placing calls, but for for some reason I can't seem to clear the stutter dialtone by either calling the extension I'm on, or the voicemail system on the Asterisk PBX. If I call my voicemail access extension directly, It tells me I have no messages waiting, yet when I hang up, then

I'm experiencing a problem with a Sipura SPA-941 not available for incoming calls after Asterisk & Freepbx upgrade. I can dial out with the phone gto any other internal or external ext. It is registered with the Asterisk server. When I dial the Sipura directly from any other extension, it goes directly to vm. I have other Sip softphones that are working fine. A sip debug when calling the

<< Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits.>> I have seen exactly this problem. Even IVR failed to work. Got an RMA from the supplier and they exchanged with no questions. Bill Seddon -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

Hello all, So i am new to asterisk and very green when it comes to Linux, so don't beat on me too bad :) I just set up * on Red Hat 9.0 last night... everything "seems" to be configured coffectly, I can start * no problem and get the CLI prompt... now here is my question... I have an account set up with VoicePulse Connect! and also have a Sipura Spa-2000... i am trying to get make

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does register fine and is able to