similar to: IAX Video and Meetme

As stated here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+MeetMe A Meetme room uses Ulaw as the audio codec, so if the other channels use different codecs, then * will transcode. Does the app_conference application works the same way? Or if i have SIP/g729 users and i create a conference with other users also at g729 asterisk will not transcode (when using app_conference)?

Just curious, how does Asterisk pack Speex frames in a packet. AFAIK, Linphone just sends raw packets, as specified in the RTP draft. Jean-Marc Le mardi 31 janvier 2006 ? 10:43 -0500, Steve Kann a ?crit : > jonathan blais wrote: > > I'm using Linphone. I tested with Asterisk and Speex only, I created > > a channel with echo and it worked. It seems to have problem when >

Hi, i was successful in compiling app_conference and setting up an conference was quite easy. :-) Does anyone knows if it is possible to have an IVR accessable from inside the conference. So, if i dialed into an conference i want to be able to press '*' and then the actual discussion is muted for me and i and menu is read to me. Something like the ${MEETME_AGI_BACKGROUND} in MeetMe.

Jean-Marc Valin wrote: >Just curious, how does Asterisk pack Speex frames in a packet. AFAIK, >Linphone just sends raw packets, as specified in the RTP draft. > > Asterisk expects speex frames to have a terminator. The phone I was referring to was the X-Ten/X-Lite phones, which seemed to be adding something _before_ the speex data to indicate the length of the frames.

We need to conference together a call center agent, a customer and a third party IVR and send DTMF tones from the agent to the IVR. MeetMe has been eating our DTMFs so we'd like to try app_conference. Has anybody setup such a configuration in app_conference and how did you configure it? -HJC

I have noticed that when I try to connect multiple G729 VoIP devices into a MeetMe conference that I can only add up to the number of G729 licenses I have. Now I would think that because all the devices are G729, this wouldn't be the case and the only license that would ever be used would be if a non G729 device or Zap channel was a part of the Meetme conference. This is apparently note the

I'm using Linphone. I tested with Asterisk and Speex only, I created a channel with echo and it worked. It seems to have problem when using app_conference. Jonathan 2006/1/31, Steve Kann <stevek@stevek.com>: > > jonathan blais wrote: > > > Hi, > > > > Does anyone ever used Speex with app_conference in Asterisk ? I'm > > having a hard time to figure

Hi there I am using IAX2 softphones dialing into meetme conferences. I also have jitterbuffer=yes, with typical jitterbuffer settings. The problem I am having is that as soon as there is a delay from a participant, then the delay continues until the participant hangs up and dials in again. When dialing in again the delay seems to go. It seems to me as though as soon as the server registers

Do anybody could compile app_conference on x86_64??? I tryied with two versions of app_conference and got the same problem on compiling: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared recompile with -fPIC app_conference.o: could not read symbols: Bad value" ENVIRONMENT:

Here in Sweden, it's supposed to be springtime. A wonderful time of the year, with sunny skies and wonderful weather. Almost summer. Today, it's not. It's winter all over again with rain and only 3 degrees celsius outside. Better to stay inside and write a weekly Asterisk newsletter :-) This week's topics: ------------------- * Looking beyond Asterisk 1.0/1.1 - what's up? *

I'm currently writing some code to support conferencing in Asterisk without using the Meetme application. The conference runs in its own thread and every new inbound or outbound channel that is created is passed to it. This thread runs the conference loop reading and writing frames to each channel. I'm writing this as if it were a bridge with more than two channels, and I'm not

Hello, I am running asterisk 1.4. For argument's sake I have 4 telephones. 2 support video, 2 do not. Calls between phones work fine and codecs are properly negociated. I have videosupport=yes in sip.conf and when the two video phones communicate I have video. I call meet me with this command EXEC MEETME 1234|d SIP looks like this : -- AGI Script Executing Application: (MeetMe)

Hi, Does anyone ever used Speex with app_conference in Asterisk ? I'm having a hard time to figure why I always get this error "warning: Invalid mode encountered: corrupted stream?". Jonathan Blais -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20060131/386141a8/attachment.htm

I have Asterisk running in Xen virtual machines. Unfortunately, this kind of virtualization makes a real time clock impossible, which in turn makes ztdummy or a Zaptel driver impossible to load, which also makes MeetMe conferences impossible. As an alternative, I have downloaded, patched, compiled and installed the app_conference source code against the headers in Asterisk CVS HEAD. I can load

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: preproc_patch_dth_10_26_05.patch Type: application/octet-stream Size: 8774 bytes Desc: not available Url : http://lists.xiph.org/pipermail/speex-dev/attachments/20051026/c27a3ed6/preproc_patch_dth_10_26_05.obj

Hi there I am using an IAX2 softphone built from the IaxClient library dialing into Meetme conferences. The IaxClient seems to use silence suppression, and not sure if this can be disabled. The client works fine through most routers, but for some it disconnects the client after about 5 minutes and gives this error in the asterisk logs: Chan_iax2.c:1480 attempt_transmit: Max retries exceeded to

Hello, Situation: I've got two asterisk 1.2.4 servers, connected to each other over the internet with IAX2 with about 20msec delay. One of the servers is hosting MeetMe. It's working fine as long as only SIP phones connected to the meetme server participate in the conference. As soon as a participant using IAX2 is connecting, lots and lots of buffer overruns and underruns are

Hi, I?m just compiling the app_conference but I can?t locate the common.h file , those it?s requered. Someone help me to locate Common.h file???? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040623/da6f8670/attachment.htm

Asterisk-people, Some of you may have heard that we were working on a simple, cross-platform IAX client library called "iaxclient". We've pretty much been "on vacation" with the project for a while, but recently have made some progress, and now have the library working across platforms, and a simple test client called "testcall", up and running on 3

I'm running 2.4.5 and app_meetme never plays conf-hasleft or conf-hasjoined with user names. I looked at app_meetme.c, but couldn't determine the cause. Any suggestions are greatly appreciated. exten => 600,1,MeetMe(600|i) I get the following: -- Executing MeetMe("SIP/jon-21f8", "600|aciMps") in new stack == Parsing '/etc/asterisk/meetme.conf': Found