similar to: Managed Switches QoS to deal with network bottleneck

Did anybody ever come across an affordable, residential cable/dsl router with support for QoS? The ones I've seen so far (Netgear, D-Link and W-Linx) do not seem to support it. I noticed that even email can damage a G.711 stream on an 128kbit uplink, leave alone file-sharing applications. I understand this is strictly related to *, but nevertheless of interest to many of us. Thilo

Hi, all I am interested in Linux related QoS, especially PRIO queue discipline (qdisc). I test some experiments about PRIO qdisc. Host A ------ Router A --- Router B --- Host C | 1Gbps | Host B ---------+ +-------- Host D flow 1 : Host A -> Host C (TCP) flow 2 : Host B -> Host D (UDP) priority 1 queue (pfifo, size 1000 packets ) : flow 1 priority 2

Hello, I''m trying to configure several wireless routers with QoS support. The idea is to implement differentiated services so that VoIP traffic gets the maximal priority, then video, control traffic, interactive data traffic and best-effort traffic. I have seen that CBQ used to be chosen as qdisc for implementing bandwith share in DiffServ but now HTB is preferred because it is

Hi.... I have setup a 4 node cluster on virtual servers on RHEL platform. Not able to get better performance statistics on glusterFS as compared to local file system. Kindly suggest a test run that can be checked to differentiate between them. Regards, Anish Kumar "Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s). are

I'm wondering if anyone knows of ISPs with service that has QoS features that would be good to use with VoIP stuff. Granted, the QoS would only be supported as long as you stayed within their network, but it might be better than nothing. --Eric

As you are probably aware, this is a ever green topic. I have personally tried doing it, testing it and verifying it and I am myself finding this problem challenging and frustrating. Most of the scripts will recommend some form of rate limiting ( or policing ) on the download. But the challenge is how to determine the correct value for the policing ? Lot of the recommendation says use x %

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

3com have some goods POE kit and some very nice managed wall jacks that supply POE and are fully managed. Here's an auction that the seller just closed:- http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=40990&item=5708757277&rd=1&ssPageName=WDVW Last time I spoke to him he had 5 boxes of 20 units and was willing to sell them at around $575 with a bit of arm twisting.

My router (1605R) currently does not support QoS. Is there any open source software available so that I can set one up before the router? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050118/38b6e3f2/attachment.htm

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Here is the situation: A T1 router going into an office which then plugs into the firewall box then into the switch. None of these devices support QOS.. Is there some sort of box/device that I can place between the T1 router and the firewall box which will allow me to prioritize voice traffic on this link? I can't change the T1 router to something that supports QOS because it has

Hi everyone, I''m new to tc but I need to use it to set up shaping on a new NAT box. In short: Each user must have their upload limited to 128kbit and downlink limited to 256kbit. Global bandwidth to be limited to 100Mbit Interactive packets to have higher priority 200+ users, so need to match packets fast So far I have managed to get the download limits working. However I need to

From: Bruno Delbono <bruno.s.delbono at mail.ac> > I'm really sorry to start this thread again but I found something very > interesting I thought everyone should ^at least^ have a look at: > http://uadmin.blogspot.com/2005/06/4-dual-xeon-vs-e4500.html > This article takes into account a comparision of 4 dual xeon vs. e4500. > The author (not me!) talks about "A

Dear All, I have an onboard Realtek RTL8111/8168B NIC. from lspci -vv : 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) It is detected, but why the speed is always 100Mbps, already change cable but still no luck. I use ethtool and from the output it seems that system know that this NIC support gigabit speed : ???????

Hi all, I'm looking for recommendations on ethernet switches for a new install. Ideally would want switches with at least 24 ports, ideally with a GE uplink, and that support PoE (power over ethernet) on every port. I've seen lots of switches, and lots of "power hubs", but the combination, which makes a lot of sense, seems rare. What is out there? Do the switches need to be

Hi all, For a top quality setup, I will need to install high quality VoIP switches with QoS and PoE. My potential customer should not have any problem with call quality. Experienced folks, Please advice me what switches to install and at what price. I may need it for upto 100 phones. What else should I consider so that phones work without problem along with the computers on the same network?

Hi all, ive got 2 internet connections set up via the nano howto (which are working great) and we are running NAT. Was looking in to qos mainly to stop large http downloads/ftp downloads from hogging the line so that browsing for other users doesnt slow to a crawl, but if the line is free and no one is doing anything then for it to use the available bandwith. The wondershaper sounded exactly what

http://www.youtube.com/watch?v=BcwieeBEySc My performance doesn't even come close to this even at low resolution and overclocked, and I have the 512Mb version of this card, this guy has the 256mb version and I have the same settings, i've seen people run some really high-end games on this like crysis at decent settings, (not high just decent). Does wine actually bottleneck performance on

Hi, On Fri, 19 Jul 2019 23:26:55 +0000, douxevip wrote: > So to summarize, this is the situation: > > 1) I run a fio benchmark requesting, small, random, async writes. Command is "fio --direct=1 --sync=0 --rw=randwrite --bs=4K --numjobs=1 --iodepth=1 --runtime=60 --group_reporting --name=sambatest --size=32k --time_based". I run this command on both the host, as on the Samba

hi guys/gals I realize that this question must have been asked before, I sroogled and found some posts on the web on how to tweak/tune gluster, however.. What I hope is that some experts and/or devel could write a bit more, maybe compose a doc on - How to investigate and trouble gluster's speed-performance bottleneck. Why I think such a thorough guide would be important? Well.. I guess