similar to: Asterisk transfer conflict

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

Hi List. I have a small problem in using the transfer key transfer of IP Phone in Asterisk 1.6, I think I spend some detail in the configuration but can not find. What happens is, when I do a transfer using the Transfer button, the phone, does not play the music on hold, which is waiting on the phone is silent, and I have the same settings on a 1.4 server, and the music plays correctly when

Hi, I am trying to use the attended transfer. So I put this in my feature.conf: [general] [featuremap] atxfer => *0 blindxfer => #0 I completly restart asterik, and not just make a RELOAD. But during a call, when I press # it runs a blind transfer and if I press * I am disconnected. I am using the CVS version of * get as explain here

Is features.conf included in the cvs as of 8-1-04? I have updated, but am not seeing it?

Dear all I am trying to work out how make call trasfer work the way I want is I am the called party I want to transfer a call so I press # and enter the ext but then it disconnects me this is a blind transfer how do I make it so its not a blind transfer so i can talk to the person before i transfer the call...and go backl to the orig caller if the transfered to ext doesnt answer.... also can

Hi folks, I was using the following featuremap: blindxfer => *1 disconnect => *9 atxfer => *2 parkcall => *7 automixmon => *0 and everything worked. Then the need arouse to use some features like automixmon during a conference, but MeetMet has the * key bound to the (admin) menu. Thus, in order to enable features like automon and transfers even during a conference, I

I'm wondering whether there's a problem with the blindxfer and atxfer commands. I was using Asterisk STABLE and pressing the # key to transfer calls worked fine, except of course when you called up FedEx and they asked "Enter the number of packages, followed by the Pound key". I found on the wiki (http://www.voip-info.org/tiki-index.php?page=Asterisk+config+features.conf) that

Hi list, This wll be my first post, so I want to thank all the developers for the great product they have created. Now, the question, I have installed asterisk 1.05 on debian sarge (binary package) with an I4l modem and 4 x-lite softphone and 2 SIP hardphones (Yuxin 100) This all works fine, exept for som echo on the ISDN channel, but I'll replace the I4L card with an AVM-C4 card next

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Hello all, I am trying to complete my dial plan and have come up with an interesting situation. My configuration is set up with 12 xlite SIP clients on SUSE linux workstation. They are calling out via 10 analog lines, TE110P->rhino 24 fxo. It all works and dials out great ... but ... this unit was brought in to handle the "global" office. So the help desk support on the Suse

Because some users have requested transfer beep confirmations I've switched our phones over to using the asterisk transfer feature instead of the built in transfer functions of the phones. While testing it was working fine, but I changed something in features.conf and suddenly any time I hit transfer (*2), I can only enter one digit before asterisk immediately tries to dial that extension.

Hello, while most of the physical phones have keys to handle attended and blind transfer, most soft phones have no support for it. Asterisk offers a "featuremap" to assign a key to blindxfer and atxfer and they work fine if the call is still in the same starting context, but if the call has moved in another context, then the new call will be started from such context with unpredictable

Hello all, First of all, let me apologize about the length of this message, but I suppose it was necessary to include the details. I've spent quite some time already trying to get the call transfer function to work on my Asterisk installation. Let me first describe the general situation of the setup I am using, so you might be able to pinpoint the cause of the problem. I'm currently

Have you enabled DTMF logging and seen the DTMF codes being recognised by Asterisk? I had a bunch of soft phones that I had to change to using ?sip info? for the DTMF signalling as the RFC signalling was not always being recognised. This would cause transfers to appear as if the user had not dialled any digits. On 20/12/2014 20:52, "sean darcy" <seandarcy2 at gmail.com> wrote:

Hi, I have been trying to enable attended transfer for callee. When the callee pressed *2, DTMF tone was heard by the caller. But when the caller pressed *2, attended transfer started. It's strange. I used two SIP phones. My Asterisk version is "Asterisk CVS-HEAD built by root@router on a i686 running Linux on 2005-06-27 06:07:18". In features.conf, I have: [featuremap]

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm trying to doing a transfer from an analog extension to a SIP extension but until the moment I was not successful. I was testing both the recall key and uncomment the following lines in the features.conf file: blindxfer => #1 atxfer => *2 verifying previously that the extension uses the arguments "tT" with the Dial

Hi list, I'm wondering if it's possible to transfer a call that is still ringing??? I Have some Grandstream GXP-2000 and with the TRNF button it's impossible. So, I've configured some keys to transfer the calls like this: [featuremap] blindxfer => #2 ; Blind transfer (default is #) disconnect => *0 ; Disconnect (default is *) ;automon => *1

I known. I'm using the 1.44 firmware version relesed on 26 may. I worked for italian IVR an HTTP pgaes. So i can only update asterisk with CVS and try atxfer. Thanks for all -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Gavin Hamill Inviato: luned? 30 maggio 2005 18.40 A:

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

I am trying to test the call parking, but It doesn't fonction :(these are my config files.extensions.conf:include=>parkedcallsexten => 4000,1,Dial(SIP/4000,60,tT)exten => 4001,1,Dial(SIP/4001,60,tT)exten => 4002,1,Dial(SIP/4002,60,tT)In features.conf:[general]parkext => 700 parkpos => 701-720 context => parkedcalls [featuremap]blindxfer => # disconnect => *0