similar to: Nvidia Driver and CentOS-3

Hello scty library, I had huge problems with NVIDIA cards on Linux. The screen would go blank as soon as X tried to load. I only tried using the driver that came with CentOS. After lots of parts swapping, I found that the monitor (obviously) and (even) the motherboard make a difference. > If so what did you do about it. Finally, I gave up on NVIDIA cards -- I got a Voodoo Banshee

Hey SCTV Library, Good work! (Is that your real name?) > The problem was the AGP driver, Not the Nvidia driver. I was wondering if you could help me write an informative FAQ for this. Here is what I have so far: The Nforce2 driver is part of the kernel-unsupported package (which must be installed separately). Set the Option "NvAGP" to "1". This tells the kernel to

When I load the latest driver from Nvidia in CentOS-3 the logon screen turn light gray and I can't log in. Has anyone else had this problem? If so what did you do about it. If I use the driver that comes with CentOS I don't have any problems. __________________________________ Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. http://promotions.yahoo.com/new_mail

Hi, I have just started to setup and configure my asterisk box and am having trouble with it. I have a dlink nic in the box as well as the digium card. When the nic is in there by itself it works, but when I put the tdm400p in, there seems to be some sort of conflict with the network card. The tdm appears as another type of network card, which I don't think it should, should it? It shows

Hello, Is this possible to install drivers for this hardware under FreeBSD, and begginig from which version? Motherboard Epox 8RDA3+ (NForce2) none0@pci0:0:1: class=0x050000 card=0x10001695 chip=0x01eb10de rev=0xc1 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce2 Memory Controller 1' class = memory subclass = RAM none1@pci0:0:2: class=0x050000

Hello all, I just installed SDL_mixer-1.2.4-9.rpm and I can see all the files in /usr/lib. I can also see them listed in ld.so.conf but when I run a .configure in supertux I get an error checking for Mix_OpenAudio in -lSDL_mixer... no configure: error: SDL_mixer library required what am I doing wrong. Any info or education is welcome. Thanks all Dominic Iadicicco P.S can't

I'm considering upgrading, and am trying to choose a modern motherboard that nevertheless fully works with Centos5/RHEL5. Though I'm partial to AMD processors, and would like to use one in my new configuration, that's not a requirement, if the most appropriate board happens to be intel-compatible. However, given the way ASUS is dumping LInux and crawling more firmly into bed with

Here is my setup. I have two samba domain controllers on the same subnet. It's a 172.16.12.0 subnet. First domain "STAFF" Second domain "PATRONS" They both have wins enabled and all clients have broadcasting disabled. Can someone tell me if I will have a problem? If so please give some kind of example. I am really trying to learn why

Hello all, I am running Samba 3.0.9 with CUPS 1.1.17. When my windows user try to pause print jobs it does not work and gives them an error "Error Processing Command" in Windows. If they try to cancel a print job it doesn't give any error. It just disappears from the print queue and print anyway. Could someone point me in the right direction? Thanks all Dominic Iadicicco

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

Hello all, Anyone know how to do autologon's in Linux console mode? Or maybe a web site that has directions that does. Thanks all Dominic Iadicicco _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain names from Yahoo! Enter now. http://promotions.yahoo.com/goldrush

Hello all, I am doing some work for a public library that is still running Samba 2.2.7aif you can believe it. When checking the log files I see this error. I believe it is generated when the domain administrator is loging off. The workstation seems to be working fine, I would just like to know why I am getting this error. If anyone could please point me in the right direction or a least give

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

Hi all, I'm having the same issue as in this previous post: http://r.789695.n4.nabble.com/R-error-td4200447.html#a4209042 And as another user of Biostar: http://www.biostars.org/post/show/42562/cummerbund-isnt-managing-cuffdiff-database/#42895 Whereby I'm trying to output cuffdiff data into cummeRbund, but it appears to be having issues with connection to a database (below). Does anyone

Hello all, Just need some info to clarify something. How is 3.3? By word of mouth I heard that their may have been some issues with it. However I have not heard anything here on this forum or any problems with RHE3 U3. So I am assuming all is well. Please verify if possible. Thanks all Dominic Iadicicco _______________________________ Do you Yahoo!? Declare Yourself - Register

Hello list, I've been using PXE Boot for quite some time now and it has been working without any problems. I'm using a Biostar M7VIZ mainboard with a VIA KM400 chipset, and VIA-Rhine VT6102 NIC. Yesterday I upgrade the Kernel on my net-boot machine from 2.4.24 to 2.6.12. When I power on the machine it boots up normally. However, when I reboot the machine, the mainboards PXE-ROM only

Hello all, I have just installed Centos 3 and I can't help notices that the fonts are blurry. I have been using RH9 and then Fedora and the fonts there are fine, But Whitebox and Centos seem to be blurie. Can anyone tell if Cents has the Byte-code interpreter enabled in Freetype? Thanks all. --------------------------------- Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital

It appears as cpuspeed is not running on my centos 5 box(s). One is a biostar motherboard Am2 6400+ the other is Asus am2 4800+. If I do "service cpuspeed stop" it says OK, If I do a "service cpuspeed start" is says OK. However at no time is cpuspeed running. /proc/cpuinfo only shows the cpu running at 1000 Mhz. If I manually run "cpuspeed -C & " I now have

I have a new biostar motherboard with nvidia chipset. The lspci says MCP51 ethernet. The module was not detected although for FC4 installs it says it works. What is the network module name for the MCP51 driver so that I can try loading it manually. CentOS 4.2 Thanks, Jerry

Hello all, I am messing around with iptables, trying to learn how it works so that I can build my self a router/firewall and mabey a VPN. Anyway I tried to use a command on my Desktop CentOS3 machine. "iptables -A INPUT -s 127.0.0.1 -p icmp -j DROP" now the command seems to have went through because I didn't get any errors, but when I go to ping 127.0.0.1 I am getting a response