similar to: variables internas

I want to do inbound routing of calls comming from sip trunks. Is there a way to force the DID that comes from a trunk that does not have DID support? (something like using the outgoing caller-id for the trunk?) My problem is this: I've got several sip trunks (SPA3000). I want to have an IVR in all but one of them, the one that is connected to a cellular adapter. In this line I want to let it

I'm configuring a sip trunk. My problem is if I configure the sip device to dial to a sip phone, it works ok but when I dials to "s" or "7777", asterisk picks up the call immediatly and places it's own ring tone instead of waiting until one of the extension configured for answer the call picks up. Is there a way to avoid it? Is it a problem of the sip trunk? Should I

How is working the automatic fax detection? I'm making tests in asteriskathome and the ivr plays, the fax sends little bips but asterisk don't detects it as a fax. (for testing I routed one caller id to the ivr). -- Alejandro Vargas

Sipdiscount has replaced their asterisk servers for another thing. Then, no more iax. Ok, but I can't make calls using sip also... I'm getting a "forbidden" error when using sip1.sipdiscount.com. Anybody got it working? -- Alejandro Vargas

I'm lerning to make my custom configurations. In extensions.conf, there is #include extensions_custom.conf [from-trunk] ; just an alias since VoIP shouldn't be called PSTN include => from-pstn [from-pstn] include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations

I'm using asteriskathome 2.5. I'm using 2 spa3000 for dialing-out. I configured a trunk for each one with maximun channels=1 and an outbound route that includes both trunks. When a second outgoing call is placed, Asterisk tries to place it in the same that is already in use resulting in a busy tone. ?What can be the problem? -- Alejandro Vargas

We have a variable set for each user/peer/whatnot that signals what the outbound caller-id should be sent as with our carrier. When someone dials a followme extension, this does not appear to be carried over for when the calls reach an outside caller, and we see the outbound caller-id being set as 'asterisk' vs the number desired. Has anyone else seen this, or found a way to

I'm trying to create a new contex for incomming calls from certain trunks. My problem is this calls are not checked through ext-did (for incoming routing). The calls from standard trunks are filtered correctly but these ones are not. Is there some way to debug what file/line is being executed by asterisk? My custom context is this: [from-pstn-nofax] include => from-pstn-custominclude

I've a problem. I've some spa3000 and spa2100. Asterisk 1.2.4. Prefered codec g711u in both. Calleng from a fxs of spa2100 to the fxo of spa3000, all works ok. Then I call from a sip phone configured for using g729, to the fxo of spa3000, it also works ok. The problem is that after this, when, making again a new call from spa2100 to spa3000, spa2100 receives only white noise. I suspect a

Hello list members. I would like to know how to playback an audio file to the caller, and while it's played asterisk to continue executing the next priorities on extensions.conf That's not the case when using "playback" command, because the next priority is executed until the audio file ends playing. I want to evaluate some variables while caller hears the audio file. Any

Hi, I'm setting up Asterisk as a voicemail with SER. My problem is, when a caller that is not registered with asterisk (no username and password in sip.conf) it prompts "403, Forbidden" . I need all calls from outside of my network to reach asterisk for my users' voicemails, because anonymous users will surely reach voicemail of my users to leave messages. What do I

Hi all! I have an issue with TDM400P FXO card. When a call enter into my IVR and select the proper option, the person that ansswer the call say your "thanks for contact us ..." but the caller cant hear this words because a delay between asterisk and caller part or between asterisk and the ATA device. What is the item on zapata.conf that can affect this delays. Thanks for any help

Dear all, I have Asterisk 1.4.23 implemented with an IVR wainting for mobile phone calls coming from a GSM Gateway. All the components are set up in DTMFMODE = RFC2238, and so when the caller from mobile touches the IP phone LAN extension, the call is succesfully established. Everything is OK except for the DTMF for number 4, because if the caller from mobile dial 1004 or 1014 extensions -which

Hi all ! Let's say you have about 6 small different companies sharing the same E1 / Asterisk server, and every company needs its own fax number. Since they don't really need fax machines, what would be the most cost-effective way to handle this (keeping fax-privacy at its best) ? Is there a way to configure Hylafax or sth & one modem behind an ATA-186 to email faxes to different

Hi, Just downloaded the latest cvs from zaptel on my sparking new Athlon64 Centos4.2 system, but hitting a stumbling block... (sorry for the long post) #make cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

Hello everyone. I'm using Asterisk 1.4.31 and A2Billing 1.7.0 to manage a small wholesale operation, so I configured A2Billing for not to answer the call nor play any greetings or balance notifications to the caller. I'm authenticating each customer by it's IP address, and each customer has it's own context, in which I set the following: ;=====in extensions.conf======

I'm trying to get working a spa3000 with asterisk. My problem is I cant get wroking the incomming calls (I installed the lastest firmware). My problem is asterisk is rejecting the authentication from the spa3000. Asterisk answers forbidden (SIP/2.0 403 Forbidden) and I think I placed the username and password correctly... Sip.conf says this: [linea2] username=linea2 type=peer secret=1111

How to read a xml file? I have this XML source: ------------------------------------------------------- <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <fichas> <ficha> <nombre>Gabriel</nombre> <apellido>Molina</apellido> <direccion>Alfredo Vargas #36</direccion> </ficha>

Hello everyone. I'm using Asterisk 1.4.31 and A2Billing 1.7.0 to manage a small wholesale operation, so I configured A2Billing for not to answer the call nor play any greetings or balance notifications to the caller. I'm authenticating each customer by it's IP address, and each customer has it's own context, in which I set the following: ;=====in extensions.conf======

Yes and No The D500 is a terrible thing First problem: it sends some horrible DTMF, so if your voicemail is configured to send #H and *H, it will not work, configure it to send numbers, like 8H and 9H (H is a placeholder for the extension). I also managed to use the MWI (message light), it's a perl script that is in voip-info.org, but with a little correction because the wiki distorted it. If