similar to: Cisco upgrade to SIP was: Covad anyone ...

Has anyone done any integration work with Covad's hosted solution ? I am considering Covad's hosted solution and want to be able to use Asterisk to develop some other apps. Anyone else tried this ? how did Covad react. I know they use MGCP. Another thing, the Cisco reseller rep tells me if I have a bunch of 7960's setup for MGCP (for use with Covad) I will need to get these

I recently upgraded a Cisco 7960 to the SIP firmware, it worked fine without a "call-manager". I just put the SIP firmware and associated config files in the TFTP directory of my asterisk server so that the phone could pull the firmware off of my asterisk server via TFTP. It took me about 5 minutes maximum to get the phone working with SIP through asterisk. NO Call-manager was used in

Hi Rich, I had to change all my nat=yes to nat=route in the sip.conf. nat=yes seems to be ignored in today's CVS. Walter > > Message: 5 > Date: Fri, 27 Aug 2004 08:45:19 -0600 > From: Rich Adamson <radamson@routers.com> > Subject: Re: [Asterisk-Users] sip change? > To: Asterisk Users Mailing List - Non-Commercial Discussion >

ive had enough of cisco unity and microsoft exchange and im looking for alternatives to our voip system. right now, we have 3 cisco callmanagers, 1 cisco ip icd system, and 1 cisco unity voicemail system. all phones are cisco 7940/7960's and some ata186/188's. voice gateways are cisco vg200's with pri cards (5 total). im running h323 on the gateways and phones are of course

Kind of off topic but I know CVS is the "prefered" way of upgrading, however are there such things as "stable" CVS upgrades? It seems a lot of the CVS's have a lot of devel bugs in this that I would be scared to put even near production. Just IMHO. :-) Matt -----Original Message----- From: Rich Adamson [mailto:radamson@routers.com] Sent: Friday, August 27, 2004 9:15 AM

Hi, An Cisco 7960 ipphone has been set to SCCP firmware by one of our students. I want to set it to 7.5 SIP firmware and I've been unsuccessful yet. Firmware versions are SCCP 3.0 (Source: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/frmwrup.htm#wp1045789) ie: Application Load P003F300 Boot Load ID PC030300 When I browse, phone settings, I see

Hi, Has anybody been successful in running the 7914 expansion unit for the Cisco 7960G IP phone? For anybody unaware of what the expansion unit does, it provides 14 additional buttons, with an LCD display. The idea, is that with an expansion unit (a 7960 can take upto 2 of these units), a user can either assign more speed-dial's, or can monitor line status/account status. So, you can

Can anyone tell me what MGCP error that I'm getting means? The hardware is a MRP200 in a Cisco 7750 PBX. (Its a FXO blade with 2 slots, first one has a 4 port FXO card and the second has 2 port FXO card. It recognises those correctly, at least to the point of this error.) MGCP Debugging Enabled MGCP read: NTFY 13 aaln/S0/SU0/0@MRP200-S1 MGCP 0.1 X: 1adace42 O: L/hd from

I've been trying to figure this one out for a while, but to no avail. I have my cisco ubr924 setup for MGCP with Asterisk as the call-agent. I have manually registered the endpoint in mgcp.conf. When I pick up the phone, I get no dialtone and debug shows errors. IOS on the ubr924 is 12.2. Any help is appreciated. from mgcp.conf: [ubr924] host=65.37.86.203 context = from-sip (just as a

I repost a message I put a week ago: I have a Cisco IAD 2431 which has MGCP protocol; I cannot make it to work againts Asterisk; at least there is some MGCP conversation between them but when I offhook a phone attached to IAD I get no tone at all. As anybody managed to get working Asterisk against an MGCP Cisco gateway ? Which MGCP version should I use ? Also I recently

I have a Cisco ATA-188 with two POTS phones and latest stable cvs. In any situations with call waiting (existing connection and calling again) the second call cause both calls to drop. This is the same for "internal" extensions and from external (ZAP and SIP). It seems to be a "502 - The transaction could not be executed, because the endpoint does not have sufficient

I'm trying to link up Cisco MGCP-enabled router (residential gateway) with Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP 0.1 vs 1.0? Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk): MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427Verb:

Hi! I have strange problem, I hope it's just a configuration problem, but maybe not. I'm trying to make a call between a MGCP gateway and Cisco 5300 talking SIP. Everything is fine except that audio is one way (from 5300 to MGCP gateway only). It seems that during reinvite Cisco gets confused by session ID and version and excpects RTP stream on different port. The call flow on SDP

If you haven't seen it yet, go here with a Flash enabled browser: http://www.theringingmovie.com Chris Coulthurst chris@shuksan.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050721/8ba2fb05/attachment.htm

Hello everyone - first time poster, long time lurker. (sounds like a radio morning program, I know). I'm attempting to get my InterTel Axxess (w/v9.0 software) to play nice with my Asterisk implementation. Asterisk 1.2.6 is running on a Fedora Core 4 x86 box. I've tried getting the Axxess to talk SIP to Asterisk, but InterTel's SIP implementation is, well-let's say, incomplete.

Does anybody has the expirience configuring Asterisk with Cisco ATA 186 MGCP firmware ? I have Cisco software v3.1.1 atamgcp (Build 040629A) Asterisk 1.0-RC1 On ATA i only put domain test. mgcp.conf looks like this [test] host = 192.168.195.55 context = default line => aaln/2 line => aaln/1 Asterisk CLI shows this: Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485

Hello: I want to receive calls from my SIP proxy and re-route them to one of the analog lines on my Cisco VG200 ia MGCP and Asterisk. Inbound SIP calls will arrive with the five digit called number preficed with an "m" by the proxy. I'd like to them match these calls against a rule like exten => _mXXXXX,1,Dial(MGCP/aaln/1@128.100.10.11) . This however results in an error.

----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Saturday, September 13, 2003 7:55 PM Subject: Asterisk-Users digest, Vol 1 #1279 - 16 msgs > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

Hello all, Sorry for the slightly off-topic issue, I need to have a capture from a network sniffer (like Ethereal for example) from a call setup with the MGCP protocol. I thought that since Asterisk now supports MGCP some of the people who develop the MGCP channel driver may have such a capture available. I need this for my MSc thesis and unfortunately, I don't have any MGCP compliant

OK. Now I show my ignorance. What's the difference between a T-1 and a channelised T-1? I see that Covad's voip service (formerly GoBeam) requires a channelised T-1. Then I read recently on the list that many T-1s being installed are actually HDSL....which would be not a T-1 at all...right? Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist