similar to: fax receive using TDM400P

Uys, Steve Underwood I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for R2MFC, I get the far and local end unblocked but as soon as I try to make a call I get dialing and then protocol failure.. Do you guys know if there are any issues with sangoma and unicall? Anybody has an a101 card working with unicall and r2mfc? Are you out there Steve? :)

Hi Guys! I have a problems with some sipuras 841 and asterisk 1.0.9. Im using 841 with asterisk 1.0.9 with a digium card (single e1 span) with steve's unicall. Everything compiled fine and in fact I can make and receive calls but I have a problem with bad sound when the sipuras call the outside E1's lines. I can listen to the caller without problems but they heard me with a choppy

I am so fed up with Digium cards. My company first owned a TE410P, I installed it in a Dell server and "enjoyed" its instability (we bought it months before Digium warned about the incompatibility issues). Then we switched to a TE411P for the hardware echo cancellation. Now we want to receive fax (< 20/day) on it and guess what ? Since April 2006 (again a few months after we bought

Hi! After upgrading to asterisk 1.2.7.1 (from 1.2.4) it seems that app_rxfax doesnt work any more. I've installed spandsp-0.0.2pre25 (the same problem with spandsp-0.0.3pre6.tgz ) app_rxfax.c, app_txfax.c and made the Makefile patch from the same directory. When starting asterisk I always get the follwing error message: [app_rxfax.so]Apr 14 18:54:20 WARNING[7223]: loader.c:325

Anybody doing email to fax using spandsp?

Hi I'm using kronecker() with a matrix and a vector. I'm interested in the column names that kronecker() returns: > a <- matrix(1:9,3,3) > rownames(a) <- letters[1:3] > colnames(a) <- LETTERS[1:3] > b <- c(x=1,y=2) > kronecker(a,b,make.dimnames=TRUE) A: B: C: a:x 1 4 7 a:y 2 8 14 b:x 2 5 8 b:y 4 10 16 c:x 3 6 9 c:y 6 12 18 > The

Hi, I am using debian 4.0 with version 2.6.18-4-686 I have downloaded the required files form site asterisk-1.2.24.tar.gz libmfcr2-0.0.3-1.4.tar.bz2 libsupertone-0.0.2.tar.gz libunicall-0.0.3-1.4.tar.bz2 spandsp-20060903.tar.gz I

Guys. I have a te100p with unicall and an E1 and Im having problem with DTMF tones but the weird thing is, I only have problems sending the tones to certain phone numbers, anybody seen this behavior? Asterisk shows on the console the dtmf tone been pressed but seems the other side is not getting them, and this just happens with certain phone numbers, not all.. Any clues(tips?

Guys. What do you think about Dell hardware and Asterisk? Whos using it, comments, any special specs recommended or models?

Hi all ! Let's say you have about 6 small different companies sharing the same E1 / Asterisk server, and every company needs its own fax number. Since they don't really need fax machines, what would be the most cost-effective way to handle this (keeping fax-privacy at its best) ? Is there a way to configure Hylafax or sth & one modem behind an ATA-186 to email faxes to different

Hi, We are trying to use attended transfer with Asterisk 1.2.5, but when we do the transfer and dial the new number, it times out after 3 rings and then the callee is put back to the original agent. Where can I adjust the timeout which applies to the number we are transferring to? I have changed the extension for this number to timeout at 60 seconds, but that seems to make no difference. --

Guys, if you define recording on queues.conf and also define a monitor_filename var on your dialplna, you can record a queue call but, isthere a way to do something with the file after the call ends? I need to move the file to some other place but I cant find where to define a command to run after a queue call finishes. Any hints?

Hello, I'm usign Kernel 2.2.19 with ext3 0.0.7b patches. I'm also using cbq to control bandwidth. The cbq is correctly creating the classes and queueing disciplines but, whenever I call cbq stop I get a kernel panic: > Aiee, killing interrupt handler > Kernel panic: Attempted to kill idle task! > In interrupt handler - not syncing The exact line in cbq script that is

Hi all, Anyone have an idea which version of spandsp, libunicall, libmfcr2, libsupertone, app_rxfax/app_txfax and chan_unicall I should use for the latest asterisk 1.2? Would that be the ones listed below? http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre4.tgz http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/

Guys.. Im new to asterisk but is it possible to simulate a dialtone for example, in other PBX when you pick up the phone you can hear a certain dialup, which is the PBX dialtone, and when you hit 9, you can hear the PSTN dialtone, is this possible? __________________________________________________________________ Anton Krall

Guys... Ive been having problems with my callerid and I have no more clues as to what I could be.. dates and times stamped on voicemail and info received on the phones display are off by +6 hours and also the date for example today is Jan 02 :) What can I do to modify this? __________________________________________________________________ Anton Krall

Guys. I have an issue with a te110p card and also some tdm04b cards on the same system: Zttest returns this for the tdm04b cards: [root@mollendo ~]# /usr/src/zaptel-1.2.4/zttest 38 -v Opened pseudo zap interface, measuring accuracy... 8192 samples in 8191 sample intervals 99.987793% 8192 samples in 8192 sample intervals 100.000000% 8192 samples in 8192 sample intervals 100.000000% 8192 samples

Guys. Ive seen on my asterisk messages log that asterisk has shutdown itself about 12 times in 5 days... The logs show nothing but: [Jun 28 09:40:02] WARNING[3172]: Unicall/4 event Drop call [Jun 28 09:40:02] WARNING[3172]: Unicall/4 event Release call [Jun 28 09:40:02] VERBOSE[3172]: [Jun 28 09:40:02] -- Unicall/4 released [Jun 28 09:40:02] VERBOSE[3084]: [Jun 28 09:40:02] Asterisk cleanly

Hi! A few months ago I needed some help for the following issue: .) a call comes in .) Person A takes the call and does an attended transfer to Person B .) Person A hangs up the phone without waiting for Person B taking the call .) the caller get lost at this point !! At this point the attended transfer should go into a blind transfer. The phone of Person B should still be ringing and the

Guys. Anybody knows why this is happening? Seems every time I make an internal call, the manager shows this and I don't get the callerid on my identapop but rather the calledid.. Event: Dial Privilege: call,all Source: SIP/intruder1-85f0 Destination: SIP/test-f037 CallerID: 201 CallerIDName: Anton Krall SrcUniqueID: 1117038116.7 DestUniqueID: 1117038116.8 Event: Newchannel Privilege: