similar to: username as extension

Hi ho, is there anyone out here that is making use of the regcontext and regexten settings in sip.conf? I've tried this on two Asterisk boxes (1.2.10 and 1.2.12.1) and in both cases I don't see the Noop priority 1 being created upon SIP client registration, "show dialplan xxx" reveals no change. And yes, I have also read and checked bug 7144; if I go down that route and no

It seems that when you use Realtime static and possibly realtime realtime for sip users, that Asterisk fails to create the regexten context for DUNDi. Someone else had the same problem back in July. Doesn't look like they ever had a resolution. <http://lists.digium.com/pipermail/asterisk-users/2006-July/160105.html>

Before I play around with this again in 1.2.1, regexten is still essentially broken, correct? The misconception seems to be that it allows you to execute a command upon registration from a SIP UA. Even the O'Reilly TFOT book erroneously states that this is what it is for. After reading the developer discussion though, it definitely seems to be broken. Is it fixed yet? Doug.

Can anyone help with the use of regexten? (* 1.4.3) I've got Asterisk creating extensions for my SIP phones using regexten but I can't seem to figure out how to make use of them once they're registered. Here's my dialplan for from-sip (the SIP's default context): asterisk*CLI> dialplan show from-sip [ Context 'from-sip' created by 'pbx_config' ]

Hi Anyone know how to use regcontext et regexten parameter from sip.conf and can give an example ? thx regards Harry -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090807/ef9ba45e/attachment.htm

You are reading the instructions for the STABLE 1.0 version of asterisk and are using the CVS version. Goto the wiki and read the instructions for RealTime. -Matthew ----- Original Message ----- From: "Muhammad Rizwan Khan" <rizwan@advcomm.net> To: <Asterisk-Dev@lists.digium.com> Sent: Wednesday, January 05, 2005 12:42 PM Subject: [Asterisk-Dev] Asterisk with MySQL >

hi all, just wondering what's happening here: i have a pap2 and an spa941. everytime i call my spa from my pap2 i can see it being added dynamically on the regcontext: [Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer 100100 [Oct 7 11:59:08] -- Added extension '100100' priority 1 to sipregcontext but from spa to pap2 i dont see it, i looked

Hello List Ive been trying to use regcontext, but I cant get it to work. Ive setup my sip peers to have the regexten _[0-9]., so that I can capture all registrations in a single extension. But when they register, I can see that the dynamic extension is created, but none of the rest of the code is executed, priority 2-4. Can anyone explain how I should use the regcontext parameter, etc. am I using

Hi all, In sip.conf: [general] regcontext = autoreg [devabc] regexten = 543 creates "exten=> 543,1,Noop(devabc)" in context autoreg when devabc registers. But I can't use "exten=> _5XX,2,Dial(SIP/${EXTEN})" in the dialplan, because there's no device SIP/543. Now I know I can add a line like "exten=> 543,2,Dial(SIP/devabc)" for each and

Hi All, I just noticed something interesting. When a sip device registers and regcontext is setup in sip.conf, a NoOp priority 1 extension is dynamically created in the dialplan within the specified regcontext. Works great. If for some reason, modification is made to the extension.conf and a >reload extension is performed, those dynamically created extensions in the regcontext vanish. Now

Hi, I have a problem with IAX accounts... I set up a few months ago an Asterisk server, with mysql support to load iax accounts. Settings seems fine because apparently the system works as expected. Yesterday I tried to add another iax account in the iax.conf directly. And I have a problem with this new account (named 444). I can authenticate from 444 to the server, and I can receive calls from

Ok, I could have sworn this was fixed in Asterisk 1.2, but it seems in Asterisk 1.4.4, that doing a reload, or even an 'extensions reload' will clear any extensions that have been created by regexten. This is VERY bad! Doug. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have Ubuntu server 10.04 64bit, and Asterisk 1.4.34, compiled from sources. I installed freetds-common,freetds-dev, libct4, libsybdb5, freetds-bin, but, when I run configure and then make menuconfig in section "Call Detail Recording" -> "cdr_tds" it's "disabled". It only writes that "Depends on: freetds(E)". On another server (same

I am trying to mount the same partition from a KVM ubuntu 8.04.1 virtual machine and on an ubuntu 8.04.1 host server. I am able to mount the partition just on fine on two ubuntu host servers, they both talk to each other. The logs on both servers show the other machine mounting and unmounting the drive. However, when I mount the drive in the KVM VM I get no communication to the host

> I'm having an issue deploying softphones into my DUNDi/regcontext > setup. My current design is that all SIP users get registered into a > sipregistration context in the sip.conf. I then have a dialplan > function that includes that and does the dial: > > include => sipregistration > exten => _XXXX,2,Answer() > exten => _XXXX,3,Wait(1) > exten =>

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Does anyone have any idea what to try next? Here are the steps I have taken and the problem: (I wanted to post my question on the first line before I explained the problem and what I have tried) ---------- Node 0 has the file system mounted just fine and works great. When trying to mount on Node 1: `mount.ocfs2 /dev/mapper/data /cluster/ data` I get this error after about 30 seconds:

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes callerid=asreceived

Hi guys, I'm building a PoC Asterisk 12 cluster based on a number of guides I've found on the net. The basic concept is using ARA in conjunction with DUNDi. I have set up ARA with pjsip according to this excellent guide here: https://wiki.asterisk.org/wiki/display/AST/Setting+up+PJSIP+Realtime This is working nicely, so now I am turning my attention to DUNDi, as per this guide here:

At the moment I'm out of the office, but when I return I'll be certain to do that. Note that my solution is different from what you are working on with regexten, though I suspect some of the challenges that I've faced and overcome are not. I'm actually using UltraMonkey for load-balancing and failover of the Asterisk boxes, and my dialplan is set up so that it need not be changed