similar to: chan_bluetooth jabra 200 / 250

Hi Everyone, I can connect the Jabra GN2124 + GN2100 (smart cord) to the Aastra 53i receiver port and I get a tone. But when I connect it to the headset port there is no tone. I am running firmware 2.4 and I can't seem to find that DHSG, EHS or whatever the setting maybe called to enable to get this headset work with the phone. Can anyone quickly tell me where the audio options are on this

Hello, I start trying to use a USB dongle and a Bluetooth GSM phone to make GSM call with asterisk using the BLT channel provided by the GSM phone. Unfortunately I get a "Everyone is busy/congested at this time" whenever I try to Dial("IAX2/****@****/2", "BLT/MotorolaLara/3474501***") For sure I make some mistake in the configuration. Unfortunately I don't find

Editing subject line to reflect current status. On 1/26/06, Nilesh Londhe <lvnilesh@gmail.com> wrote: > Since T616 is not answering (and incoming calls are going to Cingular > voicemail after 30 sec,) I suspect the problem focus area is... > > > -- Executing Answer("BLT/T616", "") in new stack > > Is

Hello, I?m trying to use my phone with asterisk to get GSM connectivity but I can?t compile the code. I got the asterisk, chan_bluetooth, zaptel and libpri sources, the last two ones compiled perfectly. I have added this to the /usr/src/asterisk/channels/Makefile: include /usr/src/chan_bluetooth/Makefile and I?ve also added chan_bluetooth.so to the CHANNEL_LIBS var. When I do "make

I have compiled chan_bluetooth and I have used it many times before... but now I have a problem and I can?t find a solution. I have a bluetooth dongle (MSI) connected to my asterisk and I use a V3 phone to make calls to another cell phones... the thing is that I just get one way audio.. I can hear people from my IAX softphone but they can?t hear me... I don?t know what could be.. anyone had

Hi, i was reading about connecting a cellular phone over chan_bluetooth. I was wondering, if one is able then to make/receive concurrent calls or if you can make just one at time? Peter

The short of it: I am unable to compile chan_bluetooth on Asterisk 1.2.1 on CentOS 4.2. I installed using the Asterisk@Home 2.2 iso. Server is a plain Celeron 2.93GHz box. Asterisk source is in /usr/src/asterisk, newest chan_bluetooth source is in /usr/src/asterisk-test/bluetooth/chan_bluetooth (I have two older versions in other directories). Steps taken: Followed the instructions here to a

Just to close the thread. The problem was that I was using an old version of the code. If anyone has the same problem, you can download the code from here: http://www.thetechguide.com/howto/asterisk/bluetoothfiles.tar.gz Good luck, Danko ----- Original Message ----- From: "Danko Miocevic" <danko@santirso.com.ar> To: "Asterisk

I am running Asterisk 1.0.9 with chan_bluetooth (kernel 2.6.11) I have managed to get the module loaded and it connects to my phone and dials (Nokia 6310i) okay, but once the call connects I hear no sound on either end. It is not who I am calling since it works with any other bluetooth headset or without one. It isn't the SIP phone or codecs because they work with any other number. I think

Has anyone had experience with Theo's chan_bluetooth with asterisk-1.2.0 on FC3. When I try to make a call to my home through the channel my phone shows calling but my home phone never rings. I get this on screen: == Spawn extension (outgoing, 3234600, 2) exited non-zero on 'SIP/2299-9131' -- Executing Dial("SIP/2299-7743", "BLT/John/3541107") in new stack

I've just set up 1.0.9 with chan_bluetooth.so, my Nokia 6680 registers and I can dial out and the called phone rings. The problem is that the Nokia keeps ringing it doesn't know that the call has been answered. (System is SFR calling to France Telecom POTS) Any thoughts? -- Dave Cotton <dcotton@linuxautrement.com>

I have a Motorola Razr successfully connected to asterisk using a bluetooth dongle and chan_bluetooth. Here's some issues I've run across: - You have to ignore the instructions in bluetooth.conf, saying to run "sdptool search --bdaddr xx:xx:xx:xx:xx:xx 0x111F" to determine the correct channel to use for your phone. My phone reported Channel 7, but will not work with anything

I have been looking at chan_bluetooth, so far being unable to make it compile with Asterisk SVN trunk. I was wondering about the different ways it can be used. What I have read so far implies two possibilities: 1. Asterisk pretends to be a handsfree unit, and can use the cell phone for placing calls over the mobile network, or answer inbound calls from the mobile network. 2. Asterisk

I googled on this for about an hour and the most relevant hit I got was, of course, the first hit: http://www.sowerbutts.com/linux-mac-mini/#support In it, he indicates that the stock Bluetooth module "should work, but untested" - he doesn't qualify the statement with anything. Has anyone tried chan_bluetooth or even the Bluz stack on a Mini or a G5? If so, under Linux or OSX?

All Any body know of a generic bluetooth adpater for the universal 2.5mm headset jack on a cell phone that supports the wireless profile *NOT* the headset profile I know jabra has the A210 http://www.jabra.com/JabraCMS/NA/EN/MainMenu/Products/Accessories/JabraA210/ JabraA210 but it only support the headset profile .. I am trying to shoe horn my current braindead cell into DocknTalk

hi, i need some small sip video endpoint for cloud videoconference (like bluejeans) i have this idea VIDEO OUT TV or projector with HDMI VIDEO IN cameras with h264 hw enconding - http://downloads.element14.com/raspberry-pi-camera/ <http://downloads.element14.com/raspberry-pi-camera/> - logitech C920 - Creative Live! Cam Connect HD - ??? ENDPOINT - raspberry - miniPC linux + asterisk

[this post is just as much for the archives as it is for immediate consumption] Somehow I had completely missed the announcement that XTen Networks had released a SIP client for Mac OSX. Well, they have. It seems to mostly work, even! Very cool. The User interface leaves something to be desired, with it's menus trying to force me to use cell-phone sized windows (!!!!) to manipulate

IRC channel chatter says that there are some new developments with a cool presence trick that Mark has come up with for bluetooth devices. I know a bit about it, but I think the general population here would like to see some details if they're available. Mark - care to give the list a rundown on the topic? In addition, are there plans for a bluetooth channel driver? The Jabra headset is

28th February I am working with Asterisk 1.2.15. I have configured sip.conf for two soft phones (I am using Xlite).I have installed the Bluez stack and so far, i manage to make a phone call from a soft phone to a GSM network. However, i have an audio problem. The soft phone can be heart by the GSM costumer but the voice in Xlite is not transmitted to the GSM. In asterisk all i got is the

asterisk-users-request@lists.digium.com is believed to have said: >Bluetooth enabled phones to talk to Bluetooth headsets; I guess there's a >protocol for the phone to talk to any Bluetooth headset, no matter who made >it. This protocol would have to include something to allow voice to pass >from the phone to the headset and vice versa. It might also include >something for