similar to: Switch statement

HI, I tried to configure Asterisk 1.8 on one of my test-hosts. I've installed from centos-asterisk.repo (http://packages.asterisk.org/centos/$releasever/tested/$basearch/): Nov 26 15:34:56 Installed: asterisk-sounds-core-en-gsm-1.4.20-1_centos5.noarch Nov 26 15:34:59 Installed: asterisk18-core-1.8.0-1_centos5.i386 Nov 26 15:35:02 Installed: asterisk18-voicemail-1.8.0-1_centos5.i386 Nov 26

It seems that I am having a heck of a time explaining my attempts at distributing ACD Queues to the list. Here's one little problem, that's only a piece of the puzzle. dundi.conf: 180q => global_dundi_q_pbx1,100,IAX,dundi1:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => global_dundi_q_pbx2,200,IAX,dundi2:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q =>

Hi, at my Asterisk box, I have a few of IAX2 phones (configured with alaw/ulaw/gsm codecs, in this order) and a PRI E1 line. In iax.conf I hav: disallow=all allow=alaw allow=ulaw allow=gsm During some incoming call, I read at console: -- Executing Dial("Zap/2-1", "IAX2/215|20|TtwW") in new stack -- Called 215 -- Call accepted by 10.97.1.7 (format ulaw) --

Hi, I need to connect two sites and two Asterisk servers sharing their dialplan. In fact users usually can be moved at different offices and carry their phone number. What's the best way to do this? - switch statement - DUNDI ? Thanks for any help Mimmus

Hi, I'm trying to edit an AMP-derived dialplan: the macro "dial" uses the AGI script "dialparties.agi" to find the extension to call. I'd like to drop this script: does anyone can explain me what is its main job? Thanks -- Domenico Viggiani

Greetings all, I'd like to start implementing a private DUNDi peering group between one of our asterisk servers hosted at a datacentre and the various asterisk boxes sitting at clients' premises. On most of the clients' boxes the dialplan will have an [in-pstn] section containing the various numbers that should be recognised by that box. Where they're from a VoIP provider they

Hi, I'm trying to write a small Visual Basic app to throw a popup with CallerIDNum when a call center agent answers a queue call. Does anyone know what is the right manager event to intercept? Thanks Mimmus

Hi, I have this setup: (PSTN E1 PRI) -- Asterisk -- (crosscable) -- Alcatel PBX --- analog phones and a few of VoIP phones directly connected to Asterisk. Calling a number (only one until now!) - an automatic responder (IVR) - from VoIP phones works, from analog phones doesn't work: NOANSWER after a few seconds. I'm using no 'r' in dial options (this caused a problem with an IVR

Hello, I have two asterisk servers and I would like to merge their dialplans. I thought DUNDi would be a natural choice. I created the following configuration on the first server: iax.conf Code: [dundi] type=user dbsecret=dundi/secret context=dundi-local dundi.conf [general] ttl=4 autokill=yes cachetime=30 entityid=00:06:5B:8E:B0:08 secretpath=dundi bindaddr=XXX.XXX.XXX.XXX port=4520

All, I made some progress, but it seems the further I go with clustering the harder things get. Hmmm, I guess if it were easy, it would be documented...... Anyhow, I have 1 * server as the DUNDi peering master with a ttl=1. The only function of this server is to lookup where other sip peers are registered and forward that info on to the requesting * server. I have 4 * servers accepting

Hi, I'm actually using a slightly old version of AAH with Asterisk 1.2.1, because at first install it was perfect for my moderate knowledge of Asterisk. It is working well but I gradually introduced many changes to dialplan during normal use and now I'm feeling like in a straitjacket! Moreover I'd like to have the chance to upgrade Asterisk regularly. I have not the experience to

I have 20+ asterisk servers and need to network them together so a phone on any of the servers can call a phone on any other server without any trouble. I can think of IAX trunks between every server. So every server will have an IAX trunk to every server and then prefix bases routing in the dialplan for each server (I can give a number to each server and use that as a prefix for that server).

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

one under my default context at extention.conf. And what is [pbx_config]? Thanks Eyal -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir Cohen Sent: Friday, June 25, 2010 4:05 PM To: asterisk-users at lists.digium.com Subject: Re: [asterisk-users] Is there a default dial plan that is not in

I'm using DUNDi. My lookup returns 'IAX2' for the tech, and 'dundi:q9sgTFkVMBFdmp0IDX1bYQ@xxx.187.142.204/3254101' for the destination. How do I dial this? I've tried dialling it with: "Dial" "IAX2/dundi:q9sgTFkVMBFdmp0IDX1bYQ@xxx.187.142.204/3254101" passed from my AGI script, but the other endpoint (xxx.187.142.204) is returning: May 11 09:23:41

I'm lazy and decided that I didn't have the time to hack up a few servers for testing, which I'll probably have to do if nobody answers this mail, but it's late in this part of the world and I'm tired. :-) I'm wondering if the use of the "switch" statement can be nested, such that system A has a "switch" statement that points dialplan inclusion to

At work, I have 4 branch offices at which I've deployed asterisk. Call termination/origination at each branch office is handled either through a frac PRI or 3rd party SIP provider. Soon, I'll be replacing the legacy PBX at our HQ with asterisk. Each branch office has between 3 and 20 employees, each with their own extension and DID, and at headquarters, we have about 70 people, again

And I'll resend this one too. Silly scalix. --Rob -----Original Message----- From: Rob Thomas Sent: Thursday, 22 June 2006 12:19 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] zapata.conf: recent changes? Looks like you've stopped compiling libpri. All those options that are being ignored, are being ignored because they're

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

On the extensions.conf explanation page is a mention of the "switch" statement and it refers one to the "connecting two * servers" page. The only mention of the switch statement there is brief and in the example. However, the example seems to have some errors in it. It shows a sample of what's in the extensions.conf file, but it clearly has sections which would be in the