similar to: Adjusting frequency asterisk sends NOTIFY's to ATA's at for MWI.

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

Hi, I didn't get any response to this posting so thought I'd post again in the hope that anyone who missed the posting the first time may be able to offer some ideas. This problem isn't specific to the particular model of phone - I can see from sip debug that the local extension itself is not being sent any Messages-Waiting headers. Any alternative strategy would also be welcomed

ok this is a wired problem. when i use X-Lite - after i register with asterisk X-lite sends a subscribe/notify request to asterisk to determine if the account has any messages waiting. if i create a sip.conf account using: user 12345 with a voicemail box 12345 - MWI works user jwolosuk with a voicemail box 12345 MWI fails (gets a 404 not found upon a subscribe) does anyone have a clue why

I've gotten nothing from http://bbs.atcom.cn on this so far. Perhaps someone on the list has experience with this. Is there a way to get MWI support for PA168V-based ATAs? Apparently some IP phones based on the PA168V chip has this support already (Atcom AT-320 for example) by configuring Asterisk with 'mailboxdetails=yes' in iax.conf. On my ATA, however, it does nothing. Any

Hi, I have a Cisco 7941 phone running SIP, and for a variety of reasons [1] have configured this in the short term to use my local Asterisk server to register to, and then have my local Asterisk server in turn register to the upstream SIP proxy at my voice provider. Voicemail is supplied by my VoIP provider, so I've no real need to set up voicemail locally. My provider also runs Asterisk,

I am having a problem with the message waiting indicator. We are currently using the ast_data modules for both our sip configuration and our voicemail configuration. In the mailbox field I have tried using both mailboxnumber@context and simply mailboxnumber. Yet so far I am still not getting a MWI on my 7905's or on my 7960's. My assumption would be that I am still missing something,

I have a large group of 7960G's running Asterisk 1.2.4 using SIP 7.5. Most of the time the message waiting indicator works fine. Once or twice a day either an MWI is not sent to the phone or the phone misses it. I have not noticed duplicates being sent and I can't figure out the time, if any, a resend is made. Anyone know why I'm missing, loosing or not sending an MWI to the

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Hi, I am using * to function as the voice mail system for Vocal. Since I do not have a context in sip.conf file for each vocal client, I can't set the mailbox=xxxx in sip.conf. How do I get the MWI to a Vocal client ? Cheers Sathya

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

Sorry if this has been asked before, but does anyone have any pointers on getting the Message Waiting Indicator working on a GS ATA-286? I have tried both settings on the 286's web page for sending a SUBSCRIBE to the SIP server. I was expecting the LED on the 286 to flash when there are messages waiting. I also have a mailbox=XX line in the sip.conf for the 286's extension. Anyone have

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some

Hi guys, is there any way to execute a command *after* a caller has hung up the call? Something like exten => s,1,Voicemail exten => s,2,AGI(mwi.agi) I'd like to turn off the MWI on my cellphone (which is done by gammu[1]) Or does anyone know a way to check the state of the MWI from outside, i.e. with a cron-job? I'm turning on the MWI with the email-notify from voicemail, but

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

Hello list members, We're trying to get MWI notifications on our ATA device and we set it to send SUBSCRIBE messages to Asterisk, but it gets UNAUTHORIZED messages, despite the fact that we set the following lines in its settings in sip.conf: subscribemwi=yes mailbox=21 at from-extensions We need help in understanding how this works and what we are doing wrong. This is the SIP debug

Hi, I am using Asterisk personally at home. My SIP client (SPA 3000) supports MWI with SIP NOTIFY messages. With a previous version of Asterisk I had no problems with MWI. But now I am using the following version which comes with Trixbox 2.8.0.1, and I have problems with MWI. Asterisk 1.6.0.9-samy-r27 Problem description: When a voicemail is left on the extension, a SIP NOTIFY message is sent

hello, I read http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large anybody could tell me more about this ? Is it available with ARA ? Regards Harry Method 3 Q: If you have your SIP phones registered with SER but your voicemail is handled by asterisk, how do you get the MWI (Message Waiting Indicator) light to function on the phone? A: In sip.conf create a section pointing at your