similar to: TDM04B/TDM2401E Card

Sorry if I post in this forum, this may be not the right one, but I hope to find in here some experts which could help me out. I have in one location 8 extensions from a Panasonic PBX ?KX-TD1232? connected to FXO Ports on an MultiVoIP Gateway from Multitech. On the other location I have 8 SP5100 IP-Phones from Micronet as remote extensions. Between the locations I have a VPN.

Hi there, quick question...do digium make any BRI cards (ISDN2) or even better a quad port BRI, maybe im going blind, but I cant see any on their website Cheers Gary

I have an ATA-186 in a SIP configuration (following Shawn Djernes how-to), but I get the following error at the asterisk console when I try to call the phone connected to the ATA: ioctl(ZT_LOADZONE) failed: Inappropriate ioctl for device Failed to register zone 'United States / North America': No data available Everything works if I remove indications.conf from /etc/asterisk -

Hi All, The meetme.conf have created as below: [rooms] conf => 101 conf => 102 and extensions.conf as below: exten => _1XX,1,MeetMe,${EXTEN} why the warning printed when I called 101. WARNING[27660]: File pbx.c, Line 1051 (pbx_extension_helper): No application 'MeetMe' for extension (ipcentrex, 101, 1) And I found asterisk have not load the meetme.conf when it starts up.

Hello All, I am trying to figure out which way to go for a quad port fxo solution with a good echo can on it. My options are the sangoma remora, a mediatrix fxo, or something similar. The issue is that I would need a good EC. This would be on about a 9000 foot loop, and the lines don't function well on a spa-3000 or zaptel tdm 4 port card. Anyone have experience that drives them in a

Hi there The "dnsmgr" in Aterisk 1.4.0 seems not to work. I enabled "DNS lookups" in dnsmgr.conf but after reloading the conf files * never refreshes DNS lookups. Any ideas how to debug this issue? Thanks in advance Housi Mueller --------------------------------- Don't pick lemons. See all the new 2007 cars at Yahoo! Autos. -------------- next part

I want to replace a Telebutler software auto attendent system that used a 4 port Dialogic board connected to a Panasonic KXTD 1232 6 line system. We have spare computers here. How do I connect asterisk to this Panasonic system? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Steve, I am trying to get tx_fax to work. I am using a TDM2401E card. I have a 3 page fax and I only receive the first page on every attempt. I think I have enabled debug output below. Can you tell me what the problem might be? I am using snapshot from oct 26. asterisk 1.2.13 and libtiff 3.6.1-12 from redat/centos 4.4. THanks, Jerry --------- Oct 28 13:13:40 DEBUG[22763]: app_txfax.c:69

Yes, i know that there are many ISDN card on the market. But when i spend money for ISDN card, i prefer to be Digiums, to get all support and help Asterisk :).

Hi All I've been away from Asterisk for some time. I was wdonering what the development status is on this? We've already got a couple of Siemens ISDN phones on an ISDN line, and I was wondering what the development status was for using them with Asterisk? My hope is that it is possible to attach the Asterisk to the existing S0 bus, so that we can use the handsets both via Asterisk and the

Hi, I am new to the Asterisk world. I don't know much about the architecture, but I am involved in installing and configuring the VoIP system. My requirement is to build a VoIP system using the 4 input lines (ISDN up0 telephone lines), it must be possible to receive calls from outside through the 4 ISDN up0 input lines, and also possible for outgoing calls, conferencing .etc. I

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

Juan, I am running a Calling Card application on a Dell PowerEdge 2850 with Asterisk 1.0.7. Recording conversations I have seen on my server causes the processors to burn more than necessary so I would recommend what William from Signate recommended: " Consider saving recorded calls in a database on a separate server. It will be simpler to build a retrieval interface that does not

Hi, I just received in the mail my TDM04B card and put it in the computer, now the computer won't even show the video card bios or the post screen. From the digium website I could not find any specific requirements for the pci card, like 32 or 64 bit slot. The motherboard for the computer I put it in is an Asus A7V333 with PCI 2.2 compliant slots. I am thinking that maybe I just got a dud

Hi all, i have installed two digium cards on my asterisk box a TDM04B & TDM22B. The channels are configured as show below: Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Slaves: 05) Channel 06:

I have installed Digium TDM04B with the latest CVS. However I have encountered following problems: 1. When it dials out, many times the digits are not properly recognized by telco as I hear the announcement "please check the number and dial again" although I see on the screen that the dialed number is correct. 2. When the call is forwarded outside, with something like exten =>

I have a an Asterisk server running asterisk 1.0.3 and a TDM04b card. I'm having a problem with my setup. Incoming and outgoing calls are working to 95%. When the other party hangs up their phone after I've hang up mine it starts ringing in my phone. example: 1. I get an incoming call 2. I answer and talk a bit 3. We say goodbye and I hang up the phone 4. The person at the other end hangs

Hello, I'm interested in implementing DID functionality with the Digium TDM04B adapter. Is DID supported with POTS? Are there any caveeats or drawbacks that I should be aware before proceeding? This pbx will be implemented in eastern europe. Thanks in advance. -- Martin Spasov <mspasov@techno-link.com>

As far as I can tell, the main kernel configuration issue is to make sure APIC and IO-APIC support is turned on, if your system supports it. (All SMP motherboards do, and many single-processor ones do as well.) This seems to give access to 32 interrupts instead of 16, minimizing interrupt sharing. -----Original Message----- From: Dennis Webb [mailto:dwebb@delta-express.cc] Sent: Friday, March

Hi and thank you. I am a beginer trying to install my first TDM04B. I am able to receive call with the card using: [incoming] exten => s,1,Dial(SIP/robgol,20,tr) on my extensions but, with [outgoing] exten => _0X.,1,Zap/1/${EXTEN} I cant send them out. I am getting the following error: Mar 26 23:37:07 WARNING[5189]: pbx.c:1291 pbx_extension_helper: No application