similar to: Working SPA 841s now return 404 Not Found for INVITES and OPTION packets from *

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

Hello All, I've spent a day trying to get a Polycom IP500 wokring with my Asterisk box. I have several others that are working fine, but this one is getting by me. Can someone on-list tell from the following SIP debug what I've missed? Sip read: INVITE sip:2000@192.168.1.30:5060;user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.1.37:5060;branch=z9hG4bK51f01c8152912F0E From: "2004"

Hi Just 2 issues I have with SPA841. 1. I autodial extension 600 then inside an AGI wait for more digits. The digits are transmitted correctly to * but they do not show up on the SPA841 display, only the 600. How do I set the 841 is show the digits after the 600# 2. Is the SPA841 pixel display backlit? Master

Dear all: I installed the rsync 2.5.4 in my two machine (192.168.1.30 and 192.168.1.120, both are AIX OS) to backup data each other. The software`s installation is ok, and I can copy local files. But when I try to backup data between two machines, there reports some errors: >./bin/rsync -avz 192.168.1.30::web ./backup-3000/ rsync: failed to connect to 192.168.1.30: Connection refused

I have a Sipura SPA-841. It's developed a nasty habit. At random times, it likes to dial my cell phone voicemail number and play my messages to anybody who happens to be within earshot. Any clues where to look at what's going on? My voice mail number (extension 220 in my dialplan) is the only number being dialed. When this happens, show channels looks like this: IAX2/NuFone-1

current setup SIP phone 192.168.1.30 --> linksys wrt54g sveasoft -- INTERNET -- (xl0) Firewall (xl2:172.16.0.50)--> (em1:172.16.0.101) Asterisk problem is RTP stream not oging trouhg from * to sip and vice versa. #1 and asterusk is pushing 192.168.1.30 back to linksys with 172 as return address.... or #2 asterisk trying to get back to me as 192.168 on public internet.. got

Hi there, I have bought 70 sipura 841 phones for a customer of mine. When following the mass provisioning guide in the admin manual for the sipura, I see it download the spa841.cfg file from my tftp server Sometimes the phone also downloads is phone specific file via tftp, and it works okay then. But, after a reboot of the phone, it is very very likely that it won't startup

Hi I am using a small script that monitors my webservers from inside. If it does not find the test page on the primary webserver it flips DNAT to point to the hot backup webserver. This is the command that it uses: iptables -t nat -D PREROUTING -i eth0 -p tcp -d 65.211.35.209 -j DNAT --to 192.168.1.151 iptables -t nat -A PREROUTING -i eth0 -p tcp -d 65.211.35.209 -j DNAT --to 192.168.1.30

Dear All, I have Asterisk and Kamailio Configuration. everything works fine, now the situation is like i have following Dial pattern in Dialplan. exten => s,n, Dial(SIP/1002 at glbvoice.com,20,m) now in my /etc/hosts i have following entry 192.168.1.30 glbvoice.com then call get forwarded to kamailio and everything is working fine now question is if i want add one more domain like

I have a small home network with server and 5 clients all on an internal LAN with private IPs. Samba, Version 4.7.6-Ubuntu, file sharing is not working on the server for any of the 5 clients. I have tried both mount.cifs and smbclient. The same errors are thrown in the server's samba logs for all connection attempts, regardless of how the client tries to connect: getpwuid(1000) failed,

I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on the new box, I've installed a generic ebay X100P. I don't have my livevoip or voicepulse accounts set up yet on the new box (can both boxes be registered at the same time?). I've set up one IP phone (SPA841) with the new box. I have my SBC POTS line plugged into the fxo card. I set up everything in AMP.

Hi all. I posted this earlier but never got any advice that helped. If anyone knows how to get this going, I'd appreciate some advice. I am attempting to setup Asterisk to allow me to press *1 while in a call to use automon to record the call but have had absolutely no success. Is there a trick to this? In extensions.conf [globals] DYNAMIC_FEATURES=>automon [default] exten =>

Hi I have a Samba4 DC (hh30.hh3.site, 192.168.1.30) and a Samba3 VM on the same box (hh33.hh3.site, 192.168.1.33). How do I tell XP and 7 clients to look at the S4 DC for authentication and the S3 fileserver for files? It already does the authentication bit OK. It's mainly the second part of the question as to how to instruct the m$ boxes to look at the file-server rather than the DC

Hello. In my setup I collected logs from many hosts using ssh + rsync. It worked fine untill I upgraded OpenSSH from version 5.0p1 to 5.1p1 on those hosts running Slackware Linux. After upgrade nothing works as before. When I try to get logs connection breaks with the following message in syslog on the server side: Aug 4 15:34:44 srvhost sshd[8130]: Accepted publickey for user from

Hi Folks Can anyone help me with the following error - is it serious; is the file transferred; are the other files transferred? [morgan@morgansmachine ~]$ rsync -a -X -A -z -v /home/morgan/Documents 192.168.1.30:/home/morgan/Documents morgan@192.168.1.30's password: building file list ... done rsync: rsync_xal_set:

Dear all: In fact, even I add the user in the command, the rsync`s error is still appearing: >./bin/rsync -avz tong@192.168.1.30:/BGI/UCSC-mirror/bin/rsync-2.5.4/man ./backup-3000/ rshd: 0826-813 Permission is denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(151) another try: >./bin/rsync -avz

Hello list, I was able to get passive mode worked out. I'm really glad I was able to do this. I'm able to log into the ftp server, list directories, enter subdirectories and upload/download files. However my next task is to enable virtual users using mysql. I have installed proftpd-mysql and enabled the sql modules in the config. I found a good article on how to do this here:

Hello all, I have seen various reports on this error posted in the past few years, but was unable to find a resolution to the various postings. I've googled the error messages too, and have hit on various sporadic similar problems encountered with no resolutions .. Apologize if this has been exhaustively queried upon in the past; however, I'd like to try asking again, nevertheless:

Just created a new backup server using CentOS 5.0. I am using a auth file to access windows shares for backups. When connecting like this smbclient //server/share -A=/auth/file it works. When I try to tar with smbclient like this smbclinet //server/share -A=/auth/file -Tc /backup/tarfile.tar I get the following message..... session_setup_failed : NT_STATUS_LOGON_FAILURE Am I doing something

Does anyone have any experience using a PRI gateway, I am looking for a way to have multiple asterisk boxes use one PRI, and send that over the network. I herd there are copper gateway devices (like a X100P card, only it registers with asterisk using sip, and it doesn't have to be physically connected to the box) Does anyone have any experience with a PRI gateway? And could tell me the cost