similar to: SIP-H323 Help and Multiple Listening Port

Dear All, Sorry to be posting again. I have solved my problem. The problem is that when exiting from the macro, the priority number is still in effect. For example, priority 1 is at the start before entering macro after the macro the priorty will be 2. Since there isn't any other dialplan command, the switch statement would be search for a priority 2 in the Realtime extensions table. One

Dear All, It seems that there is a bug on the ooh323 while using registering with gatekeeper. The gatekeeper is GnuGK and the problem is when the Asterisk recieves a call from the Gatekeeper and routes it back out to an SIP Phone. The call would be connected and immediately dropped after 1-2 seconds connection time. This doesn't happen when ooh323 module isn't registered to a

Hello, I need to install a h323 channel in order to asterisk act as a sip/h323 translator . I want to use gnugk in full proxy mode for the h323 terminals nated . Which h323 channel for asterisk and gnugk h323 oh323 or ooh323c ? Harry ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver

Hello again. I'm stll struggling trying to terminate calls from SIP through Asterisk and throught my H323 gateways... Basically the call is accepted by GnuGK but then dropped with *reason = unreachableDestination <<null>>* I did a *debug trc 10* on GnuGK and looked at the sessions... one from X-Lite through Asterisk... and one from OpenPhone... The one from OpenPhone works

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified

Hi there, I would like to communicate H323 IP phones with SIP phones. My H323 phones are registered to a gnugk GK, and the SIP phones are registered to a asterisk SIP proxy. I could not create a dialplan that works. Inside my extensions.conf file I created the following two entrances: exten => 4,1,Dial(SIP/4) exten => 5,1,Dial(SIP/5) This allows SIP phones call each other.

HI; Thanks for your reply. The reason for why I am going through asterisk in such case is just "using asterisk voicemail service" I mean: ATA1 calls ATA2, suppose ATA2 is unreachable or he is not at the office, then the call reroute (my GK is able to reroute calls if the first route is not valid) to atersik for voicemail service. Do you think I can handle it with asterisk native

Greetings- As most of you who monitor this list know, I've been messing about with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel driver here for some time- with pretty decent success. I'm hoping to cash in a chip here- I've run into something that is probably a very simple answer, yet not found a decent reference to resolve it. Scenario- -HEAD as of last week

Dear All, I am currently have this problem in which I am sending call out from the Zaptel TE405 to a VoIP gateway. But the problem that the call over to the VoIP Gateway will always have a fake ring tone. Can you please give some pointer how to fix this problem? This problem is existing in my Asterisk 1.2.1 box. Also when compiling Asterisk 1.2.5 and tried to run it with the Asterisk-addon,

Greetings to All, I hope someone has already gotten this working. I spent all day today trying to get ooh323 and gnugk to run on the same box. After a lot of tweaking to get everything compiled, I got both up and running. I can make calls IAX to H323, but cannot make calls in the reverse direction. I have tried many different configs on the GK, but always come up with the same error. It appears

With the lack of info on Yoda Communications in Taiwan and their hardware, I thought I'd post my experience. I got my hands on a few H.323 VG-400's and VG-100TA's. http://www.yoda.com.tw/model.php?type=VoIP_Solution&pname=VG400 2 of the VG-400's were 2FXO/2FXS models. A couple were deployed to SE Asia, where we planned to offer our services. Originally, I ran a GnuGK server

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -

Hi i'm trying to connect to the PSTN in the following way sip ATA -> * -> gnugk -> Cisco AS5300 -> PSTN I'm using asterisk CVS-HEAD-06/01/05-14:33:15 running over RH EL3 Asterisk-Oh323 0.7.2 pre1 Open H323 v1.13.5 pwlib v1.6.6 and I'm having a lot of trouble, gnugk and * both have public ips and are not behind any type of firewall, the sip ATA is behind a firewall and

I've read in the README file of oh323 channel that , if I want to use a GK, I have to download the v.2.0.2 from the gnugk Site, but the version that is now available is th v.2.0.3. Any problems with it? thanks! mdory -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030521/418a7d07/attachment.htm

Dear All, I was wondering will there be any problems or changes that I will need to do to compile the current Asterisk(1.2.7)/Zaptel(1.2.5)/Libpri(1.2.2) source from www.asterisk.org into a 64-bit binaries? I am currently using the following hardware for my new server. CPU: Pentium D 930 3.0 GHz Mobo: Intel D945PSN Motherboard RAM: 512MB 533MHz DDR-2 Drive: SATA II Seagate 160GB Card: TE406

I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How do I change the configs to allow more than one asterisk box register to the same GK? brian This email was scanned by: Mcafee GroupShield ---------------- CONFIDENTIAL DISCLAMER ---------------- All information provided in this

All, I've fixed my problem getting Asterisk ooh323 channel to stay registered with my Cisco IOPS gatekeeper, now I need to get dialling working. I have the following: [Asterisk with ooh323] ----h323---- [Cisco IOS GK] ----h323---- [Radio system OpenH323] 192.168.1.5 192.168.1.6 192.168.1.7 the Asterisk box has numbers

I receive the following error when I try to call another H323 extension from another H323 when going through *. NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to find a path from 1 to 8 NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to find a path from 8 to 1 WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit frame type 1,