similar to: fax <-> misdn <-> zap <-> fax // fax <-> misdn <-> ATA <-> fax

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

Hi all, I wanted to switch from my current setup (mISDN) to the native dahdi with b410p support (wcb4xp). All works fine for normal phone calls but not for faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual bad stuff (HDLC frame not byte-oriented.) Our setup uses a digium b410p card with asterisk 1.6, latest libpri and dahdi, hylafax with iaxmodem, and all this on 1

2 Asterisk servers 1.2.12.1 Connected via IAX2, same switch, GigE, no packet loss, etc 1 with a Sangoma A101 for a PRI to the PSTN Ulaw QoS enabled NAT for the registered ATA boxes, no nat between the * servers Faxing inbound: Call from PRI hits the first Asterisk server Then talks to the 2nd via IAX2 NVFaxDetect receives the fax, converts to PDF and emails it out Works great!

I've got a problem with chan-misdn I'm using asterisk with a hfcsusb-adapter in nt-mode connected to an isdn-telephone making calls to other internal clients like sip or sccp are without problems if I call into (or receive a call from) the pstn via a zap-channel (Digium E1-card) my outgoing audio from the misdn-device is very choppy. is where anything I can do about it ?

Put faxdetect = none in the misdn.conf and you'll be fine. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 12:40 -->> To: asterisk-users at lists.digium.com -->> Subject: Re: [asterisk-users]

Hello List, iam following to this howto: http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick but when iam try the command: # syslinux /dev/sda1 it writes only into the FAT partition the files they need, but mbr still is empty after. iam do this: # dd if=/dev/sda of=/tmp/mbr.dd bs=512 count=1 and open it with ghex2 in my case and see only the partition table.

Hi, Iam using cento-5.3 on x86 machine and iam working to get the console messages redirected to serial port. I have made the necessary changes in the /etc/inittab file. - - - - - id:3:initdefault . . so:12345:respawn:/sbin/agetty ttyS0 9600 vt100 - - - -- - and also in /etc/grub.conf file - - - - serial --speed=9600 --unit=0 --word=8 --parity=no --stop=1 terminal --timeout=10 serial . .

hello list , my set up is like this ip device -->ser ---> asterisk(astcc) --> pstn gatewsy my asterisk version is 1.0.2 iam using the ser as registration and asterisk aa the prepaid one with the help of the astcc. now my problem is the destination people i.e the pstn line s are listening low voice and also the blurr sound quality along with the audio of the ip device at

Hi. I've just configured a PAP2 where i wanna receive faxes, but i don't know how to disable echo-cancel option only in a misdn channel, 'cause i need it for the voice calls but not for faxes. I've just read that it's so necessary to set it up with no echo-cancel support. isn't it? I'm so lost about it. Thanks. -------------- next part -------------- An HTML attachment

Hi everybody, since some time I am looking for a current and reliable solution to send and receive faxes (probably fax-2-mail and mail-2-fax) in conjunction with Asterisk. For testing I am using a HFC-ISDN passive PCI-card, in production a Digium Dual T1/E1 PCI-card will be used. I run CentOS 5.5 (Kernel 2.6.18) and Asterisk 1.4 (but I also can use 1.8) but did not find any solution where I

Hi everybody, I'm trying to develop an R package with Fortran and OpenMP. I wrote a simple hello world but I'm not able to set the number of threads. I found this old email chain <http://r.789695.n4.nabble.com/Set-the-number-of-threads-using-openmp-with-C-td2284685.html> and I tried to set my compile instructions accordingly but i had no luck. *This is my makevars:*

Hi all Its been long time i have sending this message to this news group but i could not get proper responce from the authors or any experts that, is that bug or only the problem with my ssytem iam tryin this config with FC iptable 1.3.0 and latest TC tc utility, iproute2-ss050330 htb 3.17 iam trying past 2 weeks and digging all googles but could not able to come to conclusion whats wrong

Hi list, perhaps someone can help me out? fact: - samba 3.6.9 plus CentOS 6.5 - i have user quotas set up on their HOME directories, which resides in the "/home" filesystem - on windows workstation their disk quota is not shown, instead they see whole filesystem free/taken space (which generate much grumbling) After searching lists, googling etc., i decided to give a try the

Hi everyone! First of all: Big thanks to Tom for this great work!! Now on to my qestion: I am using Shorewall among other machines on an new server where we need some kind of accounting. The script we would like to use for this is iam (http://intevation.de/iam/). The docs say: Alternatively you can use your own iptables script and only add the ''dump'' option, which should

dear all iam newbie , i have 256 kbits of down link and 64 kbits of up link iam using squid and htb i have got this while browsing the net , there are some few issues i need help while running the script i want browsing to be as fast as possible , uplink especially kaaza should not eat my band width. eth1 got public ip address and eth0 is internal with network 10.0.0.0/24 iam also using nat

Hi iam working with asterisk with mysql Realtime when i have confgured and run the asterisk iam getting the following error i dig all the places for help could not find the results could some one help me what is wrong iam using 1.2.5 on FC4 Mar 20 23:04:52 NOTICE[2054] cdr.c: CDR simple logging enabled. Mar 20 23:04:52 NOTICE[2054] indications.c: Removed default indication country

Hi iam using Asteriks 1.2.17 Server Side ( provider Side g729) clients side gsm when iam calling, iam getting lot of errors like below and lot of voice breaks Aug 16 21:23:14 WARNING[9521] dsp.c: Inband DTMF is not supported on codec gsm. Use RFC2833 any suggestions ram -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Iam using Red hat linux 6.1 with samba version 2.0.7 .I had compiled and used it,and also used the patch given for smbmount.c by Urban.But Strangely the smbmount version is still version 2.0.5a.Is this the correct version for smbmount since i thought when i upgraded samba from 2.0.5a to 2.0.7 smbmount would also be upgraded.Because iam still facing some problems in using smbmount.If iam

Hello again guys, Iam trying to asses the best hardware for a machine that procceses a high number of packets per second on its NIC. THe only way I can achieve this without guesses is If iam able to understand or test what the number of interrupts available per core and how to translate that to PPS capabilities. So far ive been testing an Core I5 CPU and was able to achieve up to 400k