similar to: varion card

thanks Billy. I replaced print "STREAM FILE $filename \"\"\n"; with print "EXEC PLAYBACK $filename \n"; and it worked fine. Interestingly when I did print "STREAM FILE beep \"\"\n"; within the script, it worked. If I wasnt a newbie to asterisk I wouldve thought this to be strange. >From: "William Piper"

Hi,I have been using wav files with sample rate of 8khz and 8 bits and I find the sound quality really poor.What is the best sound quality I can achieve on Asterisk?Responses would be appreciated.Rgds,Akpome _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE!

I downloaded recordPad and recorded a wav file and tried playback on asterisk got the same error as before -- WARNING [1225991360] Format.wav.c:132 check_header:unexpected header size 18-- when I recorded in gsm format on my laptop asterisk did playback well I used sox to resample the recorded wav file on the asterisk machine into wav again and asterisk playback worked well. The sound

who has purchased a V400 card from Varion ? I need some help . please help me . thanks a lot

When Asterisk first starts up, it will attempt to "bring up" the B channels on any PRI circuits. If you are using A@H then you can log on to the Asterisk CLI (asterisk -r) and then do "stop now" to stop asterisk. Start up Asterisk again by typing asterisk -cvvv at the Linux command line. You should see a bunch of messages on the terminal and then you'll get the Asterisk

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

Nik, Looks like you're making some progress. When I first started using A@H I had trouble getting the outbound dialing to work. I wasn't sure where to start, so what I did was skip the macros in the dial plan. I wanted to play around with exactly what digits the telco wanted to see. So I put a specific extension in my [default] context like this: exten =>

Nik, I'm not sure that "NOP" is correct, but I'm in the states so I'll to defer to someone who knows E1/PRI. When I run zttool I have "OK" under the alarms. Is there a way you can call the telco and confirm the settings? Make sure that framing, coding and D channels are set up on their end the same way you're set up. As for asterisk, here's what I get

Hi all I have installed AAH 2.2 in my P4 PC following AAH handbook PDF and http://mundy.org/blog/index.php?p=62#amp and made as per the guide says and downloaded SJ Phone, and registered user and when i try to dial the 19197543700 i get message that, all circuits are busy now, please try your call later and when i see in the console i get this mesage any help Called easycall/19197543700

I've got echo problems. *** I'm looking for paid support. *** I'll accept free support, but don't mind paying if someone really knows what they are doing. I've read the wiki, etc. Played with the settings in zapata.conf Using V400P PSTN->_T1->_ASTERISK->_BROADVOICE->_PSTN ECHO ON CALLED PHONE PSTN->_T1->_ASTERISK->_T1->_PSTN NO ECHO

Hi! A few months ago I needed some help for the following issue: .) a call comes in .) Person A takes the call and does an attended transfer to Person B .) Person A hangs up the phone without waiting for Person B taking the call .) the caller get lost at this point !! At this point the attended transfer should go into a blind transfer. The phone of Person B should still be ringing and the

Hi Im also new but you should know very well all the interfaces you are going to connect the sistem, the number of users you'll have (hardware requeriments), know a lot about the soft/hardphones you'll use and download the asterisk handbook or the big one (i don't remember the name) Good luck Jose Manuel Cortes David X Semestre Ingenieria Electronica PONTIFICIA UNIVERSIDAD

Hi All, I Have a Digium Card TDM40P, the specification say: OEM TDM40B: TDM400P + 4 PORT FXS Bundle, my question is: Can I to install analog lines of PTSN?, other detail is: this card have 4 card green. I need to know what is the best card for the following scenario: I need a IVR for my comapny and a PBX, but i want that my extension not use FXS I want IP phone . Thanks ins advanced,

Gang, I recall several months ago that there was a company that was giving away a free 1-port T1 card, with some specific conditions. Do any of you recall who that was? My Google searches are coming up empty and now I'm wondering if I was hallucinating... Thanks, MC -------------- next part -------------- An HTML attachment was scrubbed... URL:

I want to start a community based voip network projcet and am thinkimg of using VOCAL and asterisk gateways..... my question is, has anyone bench marked asterisk vs VOCAL? is it a wise idea to use VOCAL + Asterisk or Asterisk all the way.........am expecting 1000 -> 5000 users.. your thoughts would be appreciated. _________________________________________________________________ Don't

We've been working for the past 2 weeks to get a new V400P working with our PRIs from the telephone company. We're trying to get the Asterisk server setup as a VoIP gateway for SIP and AIX. We can make SIP-SIP calls, but all calls from or to the PRI fail. This is the applicable entries from the Asterisk log (configuration files follow) for a call coming from the PSTN on the PRI. I

Hello, To detect an answering machine I have found following two commands, BackgroundDetect (comes with asterisk) MachineDetect (asterisk add-ons) First question, does BackgroundDetect works well with g729? I havn't try MachineDetect yet, what is the benefit of MachineDetect over BackgroundDetect. If anybody used any of this command successfully, please help me. If possible, please let me

I could only get *ANI*DNIS* working one way and that was setting my signalling type on the Asterisk side to 'featd' The Definity won't send *ANI*DNIS* information back to the asterisk as far as I can tell. Other than that, I've been running it with wink/wink E&M for a while now. TN464 circuit pack on the definity side, te110p on the asterisk side. Just a crossover cable

Folks! I dont know whether anyone has done this exercise before of putting together a Wish-List of things that you want to do, if you have all the gadgets you need and have a client base that needs Asterisk's Features and more. Here are some of the scenarios I am playing out that I will do, once I have enough time. Can anyone add to this list of Scenarios with or without using other gadgets,

Hi everybody I have installed a TrixBox with Asterisk 1.2.14 and relative upgreaded software. I Bristuffed it with last version of bristuff to use a Hemlet PCI ISDN CARD in a normal Italian EUROISDN installation. The * works fine except for the ISDN CARD. It is always Channel D down, but if a Call comes in, it works perfectly for some time, both inbound and outbound. It prompts Channel D UP!