similar to: No Audio on Local Machine, Remote works fine

I have a system with no Digium hardware in it (two others with 2 X100P cards in each of them as well). I'm interested in using MeetMe in the one without the hardware (it works great in the ones with the hardware). I can't use ztdummy, because the system has usb-ohci drivers, rather than usb-uhci. I have read the little there is about zaprtc, and I am wondering whether there is a

First, many thanks to Greg Boehnlein for his patch to chan_agent.c for adding a "preackannounce" option. I am running CVS HEAD from 2005/07/31, and the patch failed in a few hunks, since the code was refactored to add in some CASE statements where there were compound if statements before. Anyway, I have successfully updated the patch to work against head as of 3 weeks ago, and would

I have been successfully connected (incoming and outgoing) to FWD for a very long time. A few months ago, I changed from SIP-based FWD service to IAX2-based, and that went fine as well, both incoming and outgoing. At the time, I was running Asterisk 1.0.3 Stable. I rarely use the service, so other than noticing that I was always successfully registered to FWD, I didn't make or receive calls

Anyway, in my P.S. yesterday (the main post was on Codec problems), I described a situation where any IAX softphone was registering successfully, and then having zero sounds heard on either side of the call. Here is an "iax2 debug" output from a DIAX call to a local * server, dialing the extension that goes directly to the "demo" application. AsteriskHouse*CLI> iax2

I haven't seen anything this strange, and it's 100% reproducible. I'm hoping that there are some clever ideas out there for what to look for, since I can test to my heart's desire on this one... My Dad lives in Florida, and has a Bellsouth DSL line. Of course, he has a regular POTS line connected on the same line. He has the appropriate filters on every jack that has a phone

Following up on a thread that I started about Agents/Queue and acknowledging calls before bridging them... Greg Boehnlein said that he was putting his efforts into ICD. I downloaded and installed ICD, and I can get simple queue and agent stuff working fine, and see that this new design is much cleaner and more powerful. That said, in the sample conf files, the "acknowledge_call"

Hello I've been having the following problem today : I have a quite simple dialplan made to receive a fax: [answer-extension] exten => 1,1,Answer exten => 1,2,Macro(setcallerid) exten => 1,3,Ringing exten => 1,4,Wait(3) exten => 1,5,Macro(stdfwd3iax-notransfer,${EXTENSION},${EXTENSION},$ {EXTENSION}) exten => fax,1,Goto(faxreceive,1,1) The Wait(3) is there simply to let

Hello, did you got your issue solved? I am suffering of the same issue.... On 4/28/07, Hadar Pedhazur <hadar@unorthodox.com> wrote: > > I snipped all of the previous data, as I'm trying to "boil down" > this problem to its essence... > > I turned off the firewall for a few seconds, and still got no > audio. For those that will be suspicious, the commands

I have been running Asterisk for years on a machine with a public IP. Most recently, I have been running 1.2.17, from the day it came out, with no (noticeable) problems. Yesterday, I switched over to a new server that is on the same public subnet, one higher than the original server. I built 1.2.17 from source on that machine (as I did on the old server). My firewall on the new machine is

Hello List, I am currently having a bit of a strange issue with a pair of asterisk servers that we recently set up. For a bit of background, this particular business has two sites in two different towns, about 10 minutes apart. They have 3 analogue PSTN lines connected to the asterisk servers at each location, via a Sangoma A200 (with HEC). They are trying to have just the one receptionist for

Hi, I have a customer who experiences, once in a while, one-way audio... That is... they can hear the person they called, but the person can not hear them. The customer is connected via IAX2 to our softswitch. On the customer's end I have the following config in iax.conf: [general] bindport = 4569 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all

Hello, I've problems with following - ----- --- --- PSTN | --- isdn --- | A | ----- iax2 ------ | B | ----- --- --- On [B], there is unconditional call forwarding set back via [A] (dialparties.agi is used) to PSTN. So, call from PSTN is routed via [A] to [B] and than back again into PSTN.

I have a situation where our VOIP provider is running *, my office is running *, and my house is running *. I have an extension at the office so that if a call comes in from the VOIP provider and they select that extension, the call will be sent to my home * box and ring my phone. That works fine. I set "notransfer=no" in the iax.conf file at the office so that the office system can

Hi to everybody, i tried to find an asnwer before posting this, but most astcc billing issues i searched refer to the case when no billing occurs at all. In my case i get only initial charges and any subsequent minute does not count for billing. In my iax.conf i entered the "notransfer = yes" but nothing changed. My test card and test calls are the following TEST-CARD en N/A

Hey, For the bridge issue, take a look at 'notransfer=yes' option in your iax.conf. It'll force * to stay in the path http://www.mail-archive.com/asterisk-users@lists.digium.com/msg42262.html

Hi, Another one. I got notransfer=yes i iax.conf for both 2109 and dialout, but I still get this in my logfile Attempting native bridge of IAX2[2109@2109]/5 and IAX2[dialout]/6 Asterisk Version is CVS-04/19/04-22:17:41 What's wrong ? I gues it has somethnig to do withe my bilsec-problem as well. /HHA

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

Hello Be aware that the Nokia E60, E61 and E70 does not support NAT. Just to be shure that you know that. A clever choice from Nokia, so that users has to have some local equipment from the telco. Jon -----Oprindelig meddelelse----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne af John Joseph Sendt: 7. juni 2006 13:59 Til: Asterisk Users

I'm having a problem with intersite calls over IAX2 being abruptly terminated. Nothing odd shows in any of the logs for Asterisk or the host. The only think I can think it might be is a lag-spike on the site to site connection. How sensitive is IAX2 to lost frames, lag spikes or large variations in jitter with the GSM codec and: bandwidth=low jitterbuffer=no trunkfreq=100 ; Raised from

Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing