similar to: Snom 360 Message Waiting indicator

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator

Hi, Trying to set up these two buttons on a snom 360. The message waiting key seems to send a call to it's own number, which is obviously engaged and where you are prompted to leave another message to yourself, and the conference key seems to do nothing. Anyone manged to overcome these problems so that the conference key actually conferences, and the message waiting "retrieve"

I was always puzzled by posts to the list about people having problems getting hints to work on a Snom, since I always seem to have no problem making it work. That is, until today when I tried to get a sidecar to work. All I could do was get a monitored extension light to light up continuously, regardless of state. Frustrating! Going back to my working dialplans where I got 1 or 2 lights working

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (between the 360's, anyway. The IAXy, 200 and,

Hello. I am using a snom 320 running 5.3.6 with Asterisk 1.2.4. In the sip.conf entry, I have mailbox=1234@default and vmexten=*98. The light on the snom 320 turns on when I have voicemail and the retrieve button dials the correct extensions. However, the light turns off immediately after making the call to voicemail, even if I do not check the voicemail. Any idea on how to get this to behave

Christian, Just a quick heads up warning that something seems to be amiss on the Snom 200 running v2.03h code. The Message Waiting Indicator is blinking (due to a voicemail left in Asterisk) as its suppose to. Some time later the LED stops blinking (as though no voicemail); then later it starts blinking again. I left a voicemail to x3008 (button 2) this morning at 8:48am, and purposefully have

Dear List, I'm having a blinking MWI light on the snom 320 even when there's no message waiting in Asterisk. We've managed to make the voicemail button work using fromdomain=192.168.0.1 in sip.conf vmexten=2500 (our VoicemailMain application extension in extensions.conf). We also added notifymimetype=application/simple-message-summary also in sip.conf to allow SIP simple MWI

I have had several cases where the message waiting indicator was stuck in the on state with Cisco 7960 SIP phones. Here are the two cases: 1. Single extension that mapped to a single voice mailbox. Restarting Asterisk or getting a new voicemail then clearing it fixed the problem. 2. Three SIP extensions that mapped to a single voice mailbox. Getting a new voicemail and then clearing it

I am trying to setup Asterisk as the voicemail server for Cisco Call Manager. I have just about everything working except for the message waiting indicator. I have the following setup in context [ccm] in my extensions.conf file: ;MWI exten => _2807XXX,1,SetCallerID(${EXTEN:3}) exten => _2807XXX,2,Dial(SIP/28888@65.202.115.240) exten => _2807XXX,3,Answer exten => _2807XXX,4,Wait,1

Anyone noticed the snom 360 indications are incorrect for US zone? menu->preferences->tone scheme->usa indications.conf: [general] country=us extensions.conf: exten => 1111,1,Answer exten => 1111,n,Playtones(dial) exten => 1111,n,Wait(30) exten => 2222,1,Busy exten => 3333,1,Answer exten => 3333,n,Playtones(busy) exten => 3333,n,Wait(30) hit speakerphone on the

I have Asterisk voice mail setup locally. It works great, I'm impressed! Some details about my system: I'm using a TDM22B card to interface with both the PSTN and a VOIP provider. I'm running 1.2-beta from CVS. I have a regular VTech phone plugged into one of the FXS ports. Asterisk is able to indicate when a local voicemail message is waiting via the LCD display of my analog phone.

Hi, This is a weird request, but does anyone have a Snom 360 monitoring extensions for BLF on several Asterisk servers accross a network? Alternatively, can anyone give me a pointer as to how to setup a Snom 360 to monitor an extension not on it's own server? My scenario is that I have a main site which will have its own server (for storage of call recording data etc because the remote

I have a strange problem with a Snom 360. I have a pair of them and one is acting just fine. The other one has 2 problems, one of which I think is a configuration issues, but I cannot track it down. The main problem with that phone is that the display is wonky. When I last saw it, with the display all the way down and after a power cycle, it was fine. But just before that, the display looked

Hi Brian, many thanks to you for your answers in the past! The always gave me the little bit of mising information... My Asterisk box is running fine now so I want to try the "next step"... And now to all of you .... What I want to implement is to use 1 button of my snom-360 phone for following purpose: If I leave my desk I press this button. A light should show up as an

Sorry if this is an obvious question, but I haven't seen an obvious answer on the wiki that I remember. Has anyone managed to make the record button on the snom 360 fire off the Monitor() application? I don't see a bounty, and googling for "snom 360 record button asterisk" returns tons of product specification pages. (Joy!) I don't see a bounty for it, and the only

hello, I read http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large anybody could tell me more about this ? Is it available with ARA ? Regards Harry Method 3 Q: If you have your SIP phones registered with SER but your voicemail is handled by asterisk, how do you get the MWI (Message Waiting Indicator) light to function on the phone? A: In sip.conf create a section pointing at your

I wanted to post this to everyone in case someone else ran into this problem! Firmware 6.5.1 (Current stable release) Asterisk 1.2.13 Call Completion: Off Peer to Perr call completion: On (canreinvite=no is set in sip.conf for each friend) Call join on Xfer (2 calls): Off Those settings seem to do the trick, I tested on Snom 320s with no errors at all, Im going to test on the 360s later today,

Hi, The call waiting indicator do not work for me. I am using a snom200 cwi is switched on in phone-config. Have asked snom, but there are can not help me, because it is working for them. When it is coming in an call while the phone is busy. The phone returns: -- Got SIP response 486 "Busy Here" back from 190.100.200.19 But it should not, should make a "call waiting

Hi, I found some issues with Snom 320 message retrieve key. This button works only when the MWI does not blink! If MWI blinks and I do press retrieve button I get "Unknown" on display and busy tone. From the sip debug it looks like that Snom does not send credentials to Asterisk which responds with 407 Proxy Auth required. I have loaded Snom with latest 5 firmware. No change. I'm

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/eae682d3/attachment.htm -------------- next part -------------- Hello Whenever I receive voicemail on CISCO or SNOM or Analog Phones (Scitec), I would like to have some kind of indication in terms of beep sound or blinking voicemail indicator....Could you please tell me the way to enable