similar to: meetme and dtmf

Hi all, I'm newbe with asterisk and i'm facing with this problem that i'm not able to solve. I've to put an asterisk box after an analogic pbx wich require a 0 digit to give the dialtone. So when a client ask asterisk to dial an extension it should 1) send the 0 digit 2) wait for the dialtone 3) dial the extension the client send. How can i obtain this result? Thank's in

Hi All, Is there someone who have used a Dell 1600n as fax machine? Any information or suggestion is welcome. Thank's in advance Best Regards Accursio Avona

Hi All, i'm experiencing a strange problem on sip channel. Sometime appens that the sip client ring as if it recieves 3 calls at the same time from the same number, even if thre is only a single call. I'm experiencing that both on the softphone sjphone and on the sip phone Grandstream GXP2000 an on two asterisk box one asterisk v 1.0.7 the second asterisk 1.2.16 I have not idea where to

iaxComm is a crossplatform open source softphone utilizing the IAX2 protocol. It is distributed as part of Steve Kann's iaxclient library. I've just posted new Windows, Linux and Mac OSX binaries to sourceforge. The Windows binary was compiled on WinXP. The Linux binary was compiled on RedHat 9. The OSX binary was compiled by Andreas Wrede on 10.3 and was tested on 10.4 (Tiger) beta.

Hello All When I open up iaxcomm, it registers fine with the asterisk server. If I call into it, iaxcomm will ring; however if I leave iaxcomm sitting idle for awhile (I haven't figured out exactly how long) it seems to miss calls. I can see the calls coming in on the asterisk server but they never ring through on iaxcomm. If I close it and reopen it, it takes calls again fine. I thought I

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X (Panther) systems. Recent Changes: * Improved jitterbuffer code * Steve Underwood's Packet Loss Concealment Code Features Include: * iLBC support * GSM support * speex support * ulaw and alaw support * Blind Transfer. * Custom Ringtones per

Hi, I have downloaded iaxcomm version iaxcomm-lin-1.0rc3, when I try to execute it it gives following error. # ./iaxcomm Error wxWindows Fatal Error : Couldn't Initialize IAX Client . any idea what's going wrong ? -ag

iaxComm is a cross-platform IAX2 softphone available for Win32 and Linux. Win32 and Linux binaries as well as the LGPL source are available at: http://iaxclient.sourceforge.net Recent improvements are a less cluttered user interface, audible ringback and audible outgoing ring, and of course IAX2 protocol support. iaxComm is based upon the wxWindow GUI framework and compiles on Microsoft

I can run iaxcomm by itself...and I start up Asterisk on it own... But if I start Asterisk first, then launch iaxcomm I get this error: bash-2.05b$ ./iaxcomm Error wxWindows Fatal Error : Couldn't Initialize IAX Client . bash-2.05b$ and if I start iaxcomm first then launch asterisk, I get this startup error with asterisk: bash-2.05b# asterisk -vvvcg . . <not shown> . == Registered

hi, i am trying to install iaxcomm-win-20031117.zip in my windows xp machine. i am really messed up with the wxwindows and the xrc support thing. can anyone give me links to which i need to download for this new version to work? i installed he older version succesfully... when i installed new version it just disappears.. i am missing something. i did download a 12 M wxWin file installed it and

I am wondering if anyone has a working install of oh323 on fedora Core2. An replies would be appreciated as we need this urgently. Seshu Kanuri -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of steve@nexusuk.org Sent: Thursday, July 22, 2004 6:12 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users]

iaxComm is an Open Source softphone for the Asterisk PBX. iaxComm compiles and runs on Win32, Linux and Mac OS X systems. Sources included in the iaxclient library: http://iaxclient.sourceforge.net/snapshots/iaxclient.tar.gz Precompiled binaries at: http://iaxclient.sourceforge.net/snapshots/iaxclient.tar.gz Features: * Register with multiple servers (ie enterprise server and iaxtel).

Hi together, I try to find a softphone (freeware) solution for Windows 32, that works without problems ... Right now I use iaxcomm wich was best, of the ones I tried. But I have one problem with it. When I turn on qualify, it will not connect to the asterisk. This is also documented and normal behaveor. But if I turn of qualify, iaxcomm does not reconnect to the server, when the server got

Hi there, Maybe this has been cared about before but I could not find any solution to this problem either in the wikis or in the list archived. If someone has found a solution before please just tell me where I can find that info..thanks :) I am using iaxComm to call other people who are either using SIP or also IAX clients, like me. All of us are connected to the same asterisk server.

Hi All, I am a new bee to *. I just installed Asterisk@home on FC3. I hv a FXO card. I hv configured two extensions one x-lite and other iaxComm. I configured * using AMP. The following setup works - x-lite (x 200) to iaxComm (x 201) - PSTN to x-lite - PSTN to iaxComm Voice mail, weather etc work fine. When i try to make an external call i am getting message "All routes are busy". In

Hello I have created an iax exten in my iax.conf file: [300] type=friend username=300 secret=*** context=default host=dynamic callerid="some name" <300> auth=md5 Then in my extensions.conf I have: exten => 300,1,Dial(IAX/${EXTEN},20) exten => 300,2,Hangup I can dial from iaxComm (a soft IAX client) and that works fine. But when I try to dial 300 get: WARNING[22077]:

Hi Folks. I have installed two sip phones and two PCs in a network. The later with iaxComm. Calls are made between the sip phones and between a sip phone and a PC. When calling from one PC to the other the iaxComm shows ??? in the status column and the call can't be answered. The same goes if anyone calls from the outside and tries to reach a PC. Any ideas? Regards. -- IEE Jos? Hugo

One of my coworkers needs to get a softphone set up to my Asterisk system; he's a Linux user, so it looks like about the only IAX2 option is iaxComm. For ease of use (he'll be using this a fair bit), I'm recommending that he get a USB handset; I'm just having trouble finding any US retailers for them. :) Could someone recommend a USB handset that's compatible with iaxComm

Hi, I have configured 3 users in my iax.conf, i am using iaxcomm phones. Iaxcomm has excellent voice quality although there is no ringing tones(either ring back or ringing tone),but i can live without right now. I find that for each user i want registered i have to add his name and his ip address.I have been using "host = dynamic".Isnt there any way that i can define a dialmap such as

I am using gentoo Linux and Asterisk CVS-HEAD-09/23/04-19:57. I have tested both KPhone and IaxComm for linux but receiving no audio from asterisk. sound is working fine, as I can listen playing files using PLAY or APLAY. KPhone is configured with DTMFmode=inband and codec is ulaw and IaxComm is configured with ilbc if somebody can sort out this Thank you regards, -- Atif