similar to: simulating a few thousand SIP clients?

hi all I just setup a new site, perhaps soon a wiki, to collect what's out there of useful backports from Trunk/1.4 beta back to 1.2. Take a look at http://http://www.asterisk-backports.org/ and judge for yourself ;) roy -- Roy Sigurd Karlsbakk roy@karlsbakk.net (+47) 98013356 --- In space, loud sounds, like explosions, are even louder because there is no air to get in the way.

Does anyone have some decent Nagios scripts out there that do more than monitor the proc itself? Rather than reinvite the wheel, figured I'd ask. I already saw the one on the wiki. Matt

hi I recently spoke to mr McNamara on IRC, and he mentioned there was a "far better way to do realtime-stuff than the usual realtime in asterisk, and that this was GPL". He failed, however, to ever mention how this could be done, so I just wonder if someone else might know... ? roy -- Roy Sigurd Karlsbakk roy@karlsbakk.net --- In space, loud sounds, like explosions, are even

Hi all I''m seeing some rather bad resilver times for a pool of WD Green drives (I know, bad drives, but leave that). Does resilver go through the whole pool or just the VDEV in question? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres

hi We have a box here connected to an antenna receiving rather large amounts of metheorological data from a satellite. the data is received and ransferred to another box and removed from the receiving server. I first thought of using rsync for this, but it seems --remove-source- files has no way of checking if the file is open or not, so if the receiving process is still writing to a

Hi all We have a 100kVA GE LP Series UPS. I can't find this series in the HCL, but other GE UPSes are listed. Would it be possible to somehow use NUT with this UPS? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 98013356 roy at karlsbakk.net http://blogg.karlsbakk.net/ GPG Public key: http://karlsbakk.net/roysigurdkarlsbakk.pubkey.txt -- I all pedagogikk er det

Hi all Has anyone done any testing with dedup with OI? On opensolaris there is a nifty "feature" that allows the system to hang for hours or days if attempting to delete a dataset on a deduped pool. This is said to be fixed, but I haven''t seen that myself, so I''m just wondering... I''ll get a 10TB test box released for testing OI in a few weeks, but before

Hi all Trying to setup dovecot with mysql and postfix, I have configured it as given below. thecot user has the dovecot group as primary, and is also a member of mail and dovecot-users. Still, it can't setgid to dovecot-users. I tried changing the shell for the dovecot user to something useful and chmod'ing a file to dovecot-users, and it work well. Still, no mail comes through

hi all it seems like whatever I do, I can't use more than 1 BRI on my AVM C2 with chan_capi. Both channels seem to work, but not at the same time. And - yes - they're connected to different NT boxes :) Any ideas? kapejod? -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open

Hi I keep getting these messages on this one box. There are issues with at least one of the drives in it, but since there are some 80 drives in it, that''s not really an issue. I just want to know, if anyone knows, what this kernel message mean. Anyone? Feb 5 19:35:57 prv-backup scsi: [ID 365881 kern.info] /pci at 7a,0/pci8086,340e at 7/pci1000,3140 at 0 (mpt1): Feb 5 19:35:57

Hi all I have installed a new server with 77 2TB drives in 11 7-drive RAIDz2 VDEVs, all on WD Black drives. Now, it seems two of these drives were bad, one of them had a bunch of errors, the other was very slow. After zfs offlining these and then zfs replacing them with online spares, resilver ended and I thought it''d be ok. Appearently not. Albeit the resilver succeeds, the pool status

hi all when starting kphone, it tries to register with asterisk but fails after a while. The SIP entry in * for this user is below. This is identical to the other SIP entries. The other SIP clients are MSN messenger plus one snom. these work fine. See SIP debug output attached as 'screen-exchange' thanks roy [roy] type=friend ;insecure=yes username=roy ;secret=password host=dynamic

Hi I''m running OpenSolaris 148 on a few boxes, and newer boxes are getting installed as we speak. What would you suggest for a good SLOG device? It seems some new PCI-E-based ones are hitting the market, but will those require special drivers? Cost is obviously alsoo an issue here.... Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net

Hi all I have this server with some 50TB disk space. It originally had 30TB on WD Greens, was filled quite full, and another storage chassis was added. Now, space problem gone, fine, but what about speed? Three of the VDEVs are quite full, as indicated below. VDEV #3 (the one with the spare active) just spent some 72 hours resilvering a 2TB drive. Now, those green drives suck quite hard, but not

hi Can I use Asterisk with OS X? roy -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open Windows.

hi all when typing 'exit', asterisk complains and tells me to use STOP NOW, but not with CTRL+D! CTRL+D stops Asterisk immediately, also when calls are in progress (when asterisk is started with -c). Any chance to change this behaviour? roy *CLI> exit The QUIT and EXIT commands may no longer be used to shutdown the PBX. Please use STOP NOW instead, if you wish to shutdown the PBX.

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

hi all the help output for DISA ends like below, with the half-sentence 'Note that in the case' what's the rest of that sentence? The file that contains the passcodes (if used) allows specification of either just a passcode (defaulting to the "disa" context, or passcode|context on each line of the file. The file may contain blank lines, or comments starting with

Hi all We're considering getting some Powerware 9355-30-M-0 UPSes to replace some older ones, so I wonder if it would be possible to use NUT for this. It seems 9315 is supported, but AFAICS that's the top model. Thanks roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det

hi Just installed astping in Nagios (former netsaint), and it works fine - for some time. After several hours, the Asterisk manager module just stopped responding, and I had to restart to make it work Any idea what might cause this? Sorry - I don't have the log now. Is it possible to have asterisk log console output somewhere? roy -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS -