similar to: chan_bluetooth: successful compile and outbound cell calls: Still tweaking inbound setup. WAS: Cannot compile chan_bluetooth on Asterisk 1.2.1

Has anyone had experience with Theo's chan_bluetooth with asterisk-1.2.0 on FC3. When I try to make a call to my home through the channel my phone shows calling but my home phone never rings. I get this on screen: == Spawn extension (outgoing, 3234600, 2) exited non-zero on 'SIP/2299-9131' -- Executing Dial("SIP/2299-7743", "BLT/John/3541107") in new stack

I have compiled chan_bluetooth and I have used it many times before... but now I have a problem and I can?t find a solution. I have a bluetooth dongle (MSI) connected to my asterisk and I use a V3 phone to make calls to another cell phones... the thing is that I just get one way audio.. I can hear people from my IAX softphone but they can?t hear me... I don?t know what could be.. anyone had

Just to close the thread. The problem was that I was using an old version of the code. If anyone has the same problem, you can download the code from here: http://www.thetechguide.com/howto/asterisk/bluetoothfiles.tar.gz Good luck, Danko ----- Original Message ----- From: "Danko Miocevic" <danko@santirso.com.ar> To: "Asterisk

Hello, I start trying to use a USB dongle and a Bluetooth GSM phone to make GSM call with asterisk using the BLT channel provided by the GSM phone. Unfortunately I get a "Everyone is busy/congested at this time" whenever I try to Dial("IAX2/****@****/2", "BLT/MotorolaLara/3474501***") For sure I make some mistake in the configuration. Unfortunately I don't find

Hi I looking a good IAX service for a *emerging * voip provider. Better with a test account to try. Thanks in advance. roberto -- Ing. Roberto Pereyra ContenidosOnline Servidores BSD, Solaris y Linux Soporte t?cnico ISPs Jabber ID: rpereyra@lugmen.org.ar For reliable and professional DNS, use DNS Made Easy! http://www.dnsmadeeasy.com/u/14989 -------------- next part

I've been experiencing a problem with the automatic printer driver download function described in printer_driver2.html under Samba 2.2.5 on Red Hat 7.2. I believe that I have followed the doc correctly and in fact the driver uploads/downloads seem to work if I use a small driver set (like the Apple Laserwriter v23.0) that comes with Windows NT 4.0. The problem is that I cannot seem to

28th February I am working with Asterisk 1.2.15. I have configured sip.conf for two soft phones (I am using Xlite).I have installed the Bluez stack and so far, i manage to make a phone call from a soft phone to a GSM network. However, i have an audio problem. The soft phone can be heart by the GSM costumer but the voice in Xlite is not transmitted to the GSM. In asterisk all i got is the

Hello, I?m trying to use my phone with asterisk to get GSM connectivity but I can?t compile the code. I got the asterisk, chan_bluetooth, zaptel and libpri sources, the last two ones compiled perfectly. I have added this to the /usr/src/asterisk/channels/Makefile: include /usr/src/chan_bluetooth/Makefile and I?ve also added chan_bluetooth.so to the CHANNEL_LIBS var. When I do "make

Hi, i was reading about connecting a cellular phone over chan_bluetooth. I was wondering, if one is able then to make/receive concurrent calls or if you can make just one at time? Peter

The short of it: I am unable to compile chan_bluetooth on Asterisk 1.2.1 on CentOS 4.2. I installed using the Asterisk@Home 2.2 iso. Server is a plain Celeron 2.93GHz box. Asterisk source is in /usr/src/asterisk, newest chan_bluetooth source is in /usr/src/asterisk-test/bluetooth/chan_bluetooth (I have two older versions in other directories). Steps taken: Followed the instructions here to a

If anyone can help im trying to get my jabra bt200 or bt250 headset working with chan_bluetooth. They seem to pair ok but they will not come out of "Negotiating" state. I get this on first start of *: [HS] jabra > AT^SPTT=? [HS] jabra < ERROR If anyone can be of help please advise, im pulling my hair out on this one. Thanks Jason Price NOTES: JABRA BT200/250

I am running Asterisk 1.0.9 with chan_bluetooth (kernel 2.6.11) I have managed to get the module loaded and it connects to my phone and dials (Nokia 6310i) okay, but once the call connects I hear no sound on either end. It is not who I am calling since it works with any other bluetooth headset or without one. It isn't the SIP phone or codecs because they work with any other number. I think

I've just set up 1.0.9 with chan_bluetooth.so, my Nokia 6680 registers and I can dial out and the called phone rings. The problem is that the Nokia keeps ringing it doesn't know that the call has been answered. (System is SFR calling to France Telecom POTS) Any thoughts? -- Dave Cotton <dcotton@linuxautrement.com>

I have a Motorola Razr successfully connected to asterisk using a bluetooth dongle and chan_bluetooth. Here's some issues I've run across: - You have to ignore the instructions in bluetooth.conf, saying to run "sdptool search --bdaddr xx:xx:xx:xx:xx:xx 0x111F" to determine the correct channel to use for your phone. My phone reported Channel 7, but will not work with anything

I have been looking at chan_bluetooth, so far being unable to make it compile with Asterisk SVN trunk. I was wondering about the different ways it can be used. What I have read so far implies two possibilities: 1. Asterisk pretends to be a handsfree unit, and can use the cell phone for placing calls over the mobile network, or answer inbound calls from the mobile network. 2. Asterisk

I googled on this for about an hour and the most relevant hit I got was, of course, the first hit: http://www.sowerbutts.com/linux-mac-mini/#support In it, he indicates that the stock Bluetooth module "should work, but untested" - he doesn't qualify the statement with anything. Has anyone tried chan_bluetooth or even the Bluz stack on a Mini or a G5? If so, under Linux or OSX?

Hello everybody! I've seen that you can connect your cellphone via bluetooth, but I've a Motorola V300 and it doesn't have that feature, so I wish to connect it via USB cable, is it pissible con use my cellphone with asterisk like that? I 've not been able to find information on how to do this, I'l appreciate any help. Thanks in advance! -- Facundo Ameal.

I am using Samba 3.0.2a on Redhat 9 with CUPS 1.1.17. Since upgrading from Samba 2.2.8, I have been having various printing issues. 1) When printing to an HP LaserJet 4 through Samba, if I collate multiple pages from Word, it will print all the pages on one sheet. So, if I was two copies of two pages, it will print pages 1 and 2 on 1 sheet twice. If I setup a TCP port in windows that goes

I am looking for SIP with power over ethernet desktop phones that will work with asterisk and Plantronics HL-10 Handset Lifter for Remote Answering. Any suggestions? I am considering buying about 150 of these desktop phones for a new call center.

Here's the short of it. I have an Asterisk 1.2.1 system setup to handle both personal and business calls. Now, the business callers will hear music while on hold, so the default MOH needs to play regular music. Personal callers should hear rings, not music. I have this working except for one specific case. If someone calls during the day (we're night people), asterisk will not ring