similar to: Re: Asterisk-Users Digest, Vol 18, Issue 158

Dear All, Sorry to be posting again. I have solved my problem. The problem is that when exiting from the macro, the priority number is still in effect. For example, priority 1 is at the start before entering macro after the macro the priorty will be 2. Since there isn't any other dialplan command, the switch statement would be search for a priority 2 in the Realtime extensions table. One

Dear All, I am having this strange problem on my Asterisk 1.2.1. We have a web dialer that can register to the Asterisk box in Hong Kong, but another user using the same account can't register to the Asterisk box using the same web dialer. Below is an output of the sip debug logs. It seems that the digest is missing the username and password, but why? I have also have this call flow for

Dear All, I am having some problems with connecting with a UA. Sometimes there is not sound in the call made, sometimes the caller would near no sound, while the callee can hear the caller. I have attached the rtp debug and sip debug for you comments. Please help me. Thank you all. Asterisk Version is 1.2.1 Asterisk RTP Range is 10000 to 20000 UA Listen RTP Port is 15000 Below is the the

Dear All, I am currently have this problem in which I am sending call out from the Zaptel TE405 to a VoIP gateway. But the problem that the call over to the VoIP Gateway will always have a fake ring tone. Can you please give some pointer how to fix this problem? This problem is existing in my Asterisk 1.2.1 box. Also when compiling Asterisk 1.2.5 and tried to run it with the Asterisk-addon,

Dear All, I was wondering will there be any problems or changes that I will need to do to compile the current Asterisk(1.2.7)/Zaptel(1.2.5)/Libpri(1.2.2) source from www.asterisk.org into a 64-bit binaries? I am currently using the following hardware for my new server. CPU: Pentium D 930 3.0 GHz Mobo: Intel D945PSN Motherboard RAM: 512MB 533MHz DDR-2 Drive: SATA II Seagate 160GB Card: TE406

Dear All, It seems that there is a bug on the ooh323 while using registering with gatekeeper. The gatekeeper is GnuGK and the problem is when the Asterisk recieves a call from the Gatekeeper and routes it back out to an SIP Phone. The call would be connected and immediately dropped after 1-2 seconds connection time. This doesn't happen when ooh323 module isn't registered to a

Hi John, Try adding username=5702 and username=5703 to each of the configs in sip.conf. I recall I had this problem with the Grandstreams. -----Original Message----- From: John Coll [mailto:john.coll@csoft.co.uk] Sent: Saturday, January 03, 2004 11:56 AM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Newbie - getting two local phones tocommunicate would be a good start :)

Hi Tilghman!   > Clearly, you missed the point.  Since there is a FREE predictive dialer out > there, and your product costs something, you are not the world's cheapest > predictive dialer.  I respect your wording and the way you or other people think on the list about difference between cheapest and free predictive dialer.   Surely

I'm running Asterisk CVS-v1-0-12/20/04. I'm using PHP with Manager API Here is the code: #################################################################### # Make call #################################################################### $socket = fsockopen($ask_db,"5038", $errno, $errstr, $timeout); if (!$socket) { echo "$errstr ($errno)<br /\n"; } else {

Does anyone have any experience using asterisk with an external predicitve dialer, like MediaTel? Specifically: The predictive dialer dials out over T1 circuits. It connects to asterisk via amphenol cable from an fxs card in the dialer to asterisk with a tdm2406 fxo card. In the analog world, the dialer dials out through the t1 circuit, and the fxs card is plugged into a 66 block so the

Hi All, I am having some problems with Asterisk on static IP and Sipura-1001 on dynamic IP. Is there any solutions to in the Asterisk configuration or Sipura-1001 to re-register when the router change IP dynamic IP? Thanks. Regards, Kengie -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone made this work? For me everything is fine until I switch canreinvite form no to yes. What happens is that asterisk hangs on "attempting native bridge" ... from what I understand "attempting native bridge" means that the RTP is routed through asterisk (just without any codec translation) But it shouldn't do that ... right? ... canreinvite is set to yes ...

I would think I could do this but for some reason I am stymied. I have a PRI from RCN connected to a cisco 3640 (in my day "cisco" is all lower case :-)). My config looks something like this on the cisco... --------------------------------------------------------- voice-card 3 dsp services dspfarm ! ip cef ! isdn switch-type primary-5ess ! controller T1 3/0 framing esf linecode

I have a customer with a more or less unique need. Right now we are using Wombat as a dialer software so they can contact clients for QA purposes. Everything is working very well and their contact center productivity is way up from the old manual dialing method. The only thing we are having a problem with is that they have up to 5 phone numbers to contact a single customer. Obviously

One of my user is using asterisk 1.4 based Dialer i.e Vici 2.0. Today, when they downloaded , the CDR from the carrier site for 26th June 2010 , they see 50% calls are NEVER dialed by Dialer but it appears in CDR. Amazingly, all the call durations are of 29-30 secs. When we checked the status of the same in Dialer, lead is present there but its marked as NEW which means Dialer has ever dialed

Hey all, Has anyone had any issues with phones having multiple lines that are in different contexts? We've got a couple phones that we're testing intercom functionality for, and I'm noticing that for some strange reason, no matter what line we use, the phones tend to be completely in one context or another, not segregated like I would expect. Our contexts look like this: context

I'm trying to use Asterisk (v1.2.11) make a callback that dials both legs of the call into a Meetme() room together, but I keep getting "conf-invalid" messages. I created a callfile (/var/spool/asterisk/outgoing/out.call) that specifies a Local channel (extension) which contains a Dial() command to the "dialer", and an extension which contains a Dial() command to the

Though I've had implementations of Asterisk, I havent encountered this one yet, so i'd like to seek your advise if this possible. I would want asterisk to be stand between the dialer the destination. The dialer will now dial asterisk access number. Asterisk will acknowledge user by using CallerID and check against its database for authentication and then sends out a DTMF A tone for ?

No, you don't need a sound card. Do you have ztdummy loaded or zaptel device in your system? Regards, Gus ----- Original Message ----- From: "Chris Hariga" <contact@techselesta.com> To: <asterisk-users@lists.digium.com> Sent: Sunday, October 19, 2003 8:19 PM Subject: [Asterisk-Users] Music on hold... > Hi, > > I need a sound card and mpg123 for music on

Currently I have a predictive dialer that is web-enabled, as well as a superdialer mechanism. I was wondering what kind of success people have had with their dialers (lessons learned, etc.) and how I need some direction on how to seamlessly integrate an inbound system with the predictive dialer. My thoughts are that inbound phone calls will be routed to a receptionist first, who will then