similar to: Cannot compile chan_bluetooth on Asterisk 1.2.1

Editing subject line to reflect current status. On 1/26/06, Nilesh Londhe <lvnilesh@gmail.com> wrote: > Since T616 is not answering (and incoming calls are going to Cingular > voicemail after 30 sec,) I suspect the problem focus area is... > > > -- Executing Answer("BLT/T616", "") in new stack > > Is

If anyone can help im trying to get my jabra bt200 or bt250 headset working with chan_bluetooth. They seem to pair ok but they will not come out of "Negotiating" state. I get this on first start of *: [HS] jabra > AT^SPTT=? [HS] jabra < ERROR If anyone can be of help please advise, im pulling my hair out on this one. Thanks Jason Price NOTES: JABRA BT200/250

I ran into a problem today while trying to compile chan_cellphone version 17 on a CentOS 4.4 machine. Apparently the bluez and autoconf versions were to old and as I tried to install the latest version, I found that the new bluez-lib would install and allow the chan_cellphone to compile, but bluez-utils required an update to D-sub which in turn required python 2.4 or better. That apparently in not

I've been failing to get chan_mobile working, so am looking to the experts to help :o) I have followed this guide - http://www.voipphreak.ca/2008/10/30/installing-and-configuring-chan_mobile-for-bluetooth-presence-support-in-asterisk-16/ and this guide - http://www.geek-pages.com/articles/asterisk/howto_build_and_configure_chan_mobile_on_trixbox.html and tried hybrids of the two which is

I am running Asterisk 1.0.9 with chan_bluetooth (kernel 2.6.11) I have managed to get the module loaded and it connects to my phone and dials (Nokia 6310i) okay, but once the call connects I hear no sound on either end. It is not who I am calling since it works with any other bluetooth headset or without one. It isn't the SIP phone or codecs because they work with any other number. I think

I have compiled chan_bluetooth and I have used it many times before... but now I have a problem and I can?t find a solution. I have a bluetooth dongle (MSI) connected to my asterisk and I use a V3 phone to make calls to another cell phones... the thing is that I just get one way audio.. I can hear people from my IAX softphone but they can?t hear me... I don?t know what could be.. anyone had

I have been looking at chan_bluetooth, so far being unable to make it compile with Asterisk SVN trunk. I was wondering about the different ways it can be used. What I have read so far implies two possibilities: 1. Asterisk pretends to be a handsfree unit, and can use the cell phone for placing calls over the mobile network, or answer inbound calls from the mobile network. 2. Asterisk

I googled on this for about an hour and the most relevant hit I got was, of course, the first hit: http://www.sowerbutts.com/linux-mac-mini/#support In it, he indicates that the stock Bluetooth module "should work, but untested" - he doesn't qualify the statement with anything. Has anyone tried chan_bluetooth or even the Bluz stack on a Mini or a G5? If so, under Linux or OSX?

I have a Motorola Razr successfully connected to asterisk using a bluetooth dongle and chan_bluetooth. Here's some issues I've run across: - You have to ignore the instructions in bluetooth.conf, saying to run "sdptool search --bdaddr xx:xx:xx:xx:xx:xx 0x111F" to determine the correct channel to use for your phone. My phone reported Channel 7, but will not work with anything

Hello, I start trying to use a USB dongle and a Bluetooth GSM phone to make GSM call with asterisk using the BLT channel provided by the GSM phone. Unfortunately I get a "Everyone is busy/congested at this time" whenever I try to Dial("IAX2/****@****/2", "BLT/MotorolaLara/3474501***") For sure I make some mistake in the configuration. Unfortunately I don't find

asterisk-users-request@lists.digium.com is believed to have said: >Bluetooth enabled phones to talk to Bluetooth headsets; I guess there's a >protocol for the phone to talk to any Bluetooth headset, no matter who made >it. This protocol would have to include something to allow voice to pass >from the phone to the headset and vice versa. It might also include >something for

Hi All Does anyone know if one could use bluetooth on a cell phone with *? Would be nice to have your cell as an office phone combo. I heard that there is a bluetooth module for *? If so this should be possible? Thanks Doug --- NOTICE - This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient

Hello, I?m trying to use my phone with asterisk to get GSM connectivity but I can?t compile the code. I got the asterisk, chan_bluetooth, zaptel and libpri sources, the last two ones compiled perfectly. I have added this to the /usr/src/asterisk/channels/Makefile: include /usr/src/chan_bluetooth/Makefile and I?ve also added chan_bluetooth.so to the CHANNEL_LIBS var. When I do "make

Just to close the thread. The problem was that I was using an old version of the code. If anyone has the same problem, you can download the code from here: http://www.thetechguide.com/howto/asterisk/bluetoothfiles.tar.gz Good luck, Danko ----- Original Message ----- From: "Danko Miocevic" <danko@santirso.com.ar> To: "Asterisk

28th February I am working with Asterisk 1.2.15. I have configured sip.conf for two soft phones (I am using Xlite).I have installed the Bluez stack and so far, i manage to make a phone call from a soft phone to a GSM network. However, i have an audio problem. The soft phone can be heart by the GSM costumer but the voice in Xlite is not transmitted to the GSM. In asterisk all i got is the

I'm running chan_cellphone version 13 on the latest svn trunk (as root). I believe I have chan_cellphone set up correctly (bt addr and port retrieved from the "cell search" CLI command). When I load the chan_cellphone module, my Motorola V3m asks if I want to allow "Asterisk PBX", I say yes and enter the 0000 for the pin, then my phone tells me the pin is invalid. Here

I've seen in the wiki that it is possible to use a celldock device to use a cell phone as a PSTN line to Asterisk, but I haven't seen any comments as to how well this actually works. I was thinking about hooking a celldock to a FXO input of my Digium TDM400P card and use it to connect via bluetooth to my RAZR V3C. I am aware of the software solution (chan_bluetooth), but my Asterisk

Mine goes to chan_bluetooth. Somewhat of a pain getting it going but I am totally floored with how cool it is! Thanks, Steve Totaro

Hi, i was reading about connecting a cellular phone over chan_bluetooth. I was wondering, if one is able then to make/receive concurrent calls or if you can make just one at time? Peter

Has anyone had experience with Theo's chan_bluetooth with asterisk-1.2.0 on FC3. When I try to make a call to my home through the channel my phone shows calling but my home phone never rings. I get this on screen: == Spawn extension (outgoing, 3234600, 2) exited non-zero on 'SIP/2299-9131' -- Executing Dial("SIP/2299-7743", "BLT/John/3541107") in new stack