similar to: asterisk 1.2 bristuff and sms

Hiya, I've been doing some testing with SMS in Belgium (Belgacom), sending SMS seems to work fine. (with .call file and a context that handles the sending) The problem is however, receiving.. Hardware and software is quadBRI from Junghanns, bristuff RC8h (asterisk 1.0.8), Debian 3.1. For receiving SMS in asterisk, I am using: [custom-smsrx] exten => s/0171701,1,Verbose(Receiving SMS

Hi, I have been using app_sms for a few weeks now, since I recently upgrade to asterisk 1.2.9.1 (latest bristuff, -q) however, app_sms doesn't seem to work that well anymore.. On receiving an sms, I execute the app_sms script, and get this as output: -- Accepting voice call from '171701' to 'ournumber' on channel 0/1, span 2 -- Executing Goto("Zap/4-1",

Hi All, I am a newbie and trying to install Asterisk from instructions given in http://www.voip-info.org/tiki-index.php?page=Asterisk+RPM. We have Centos 3.3 so I downloaded rpm's from ftp://ftp.linuxsys.com/pub/LSE/packages/CentOS-3.4/asterisk-1.0.9/ and tried installing one by one but I get the following errors error: Failed dependencies: asterisk = v1.0.9 is needed by

Hi, I am just moving from Asterisk 1.2+bristuff up to 1.6.2, a huge leap :) I was wondering if someone could point me at 3 things that I appear to have "lost"? 1) ZapEC(off) - Is there an equivalent dialplan command to request no EC on a channel before dialling in DAHDI? 2) rxfax(file.tiff) - I have found ReceiveFax(), but I am aware that much has happened in the faxing stakes

http://dovecot.org/releases/1.0/dovecot-1.0.10.tar.gz http://dovecot.org/releases/1.0/dovecot-1.0.10.tar.gz.sig v1.0.8 and v1.0.9 were a bit bad releases. Hopefully one day I've managed to have written a proper test suite which can be run before doing any releases.. * Security hole with LDAP+auth cache: If base setting contained %variables they weren't included in auth cache key,

http://dovecot.org/releases/1.0/dovecot-1.0.10.tar.gz http://dovecot.org/releases/1.0/dovecot-1.0.10.tar.gz.sig v1.0.8 and v1.0.9 were a bit bad releases. Hopefully one day I've managed to have written a proper test suite which can be run before doing any releases.. * Security hole with LDAP+auth cache: If base setting contained %variables they weren't included in auth cache key,

mkumar@mantragroup.com wrote: > Hi All, > > I am a newbie and trying to install Asterisk from instructions given > in http://www.voip-info.org/tiki-index.php?page=Asterisk+RPM. We have > Centos 3.3 so > I downloaded rpm's from > ftp://ftp.linuxsys.com/pub/LSE/packages/CentOS-3.4/asterisk-1.0.9/ and > tried installing one by one but I get the following errors

Hi, Is the following behaviour a bug or a feature ? Using bristuff-0.4.0-RC3d.tar.gz, the call file thereafter produces : [Mar 16 15:39:36] WARNING[25547]: pbx_spool.c:267 apply_outgoing: At least one of app or extension (or keyword message/pdu) must be specified, along with tech and dest in file /var/spool/asterisk/outgoing/astup.call [Mar 16 15:39:36] WARNING[25547]: pbx_spool.c:457

Hi everyone, I get these events sent like this: Event: ParkedCall Privilege: call,all Exten: 701 Channel: Zap/4-1 From: IAX2/cnw-4 Timeout: 120 CallerID: XXXXXXXXX CallerIDName: Conrad Wood Unqiueid: asterisk-1713-1139266402.909 ^^^^^^^^^ Please note the spelling of uniqueid. I find the spelling in res_features.c - but only once I patched it with bristuff patches. Does anyone know whether that

After upgrading a CentOS 3.x box to CentOS 4.1 (both x86_64 with an Athlon64) I also wanted to get the latest bristuff. Unfortunately bristuff without florz causes the box to kernel panic within hours (console will complain about bad frame received something). It seems however that the florz patch will not work for x86_64 arch. Bristuff -0.2.0-RC8j compiles fine without the florz patch, but

I am following the guide here: http://updates.xorcom.com/astribank/bristuff/1.4/bristuff-current/INSTALL.html for installing bristuff on a CentOS5.11 box (stock 2.6.18-398.el5.i686). Whilst building zaptel I get the error as follows: CC [M] /usr/src/bristuff-0.4.0-RC4-xr7/zaptel-1.4.12.9.svn.r4649/kernel/xpp/card_bri.o In file included from

I'm still trying to install a HFC-s BRI card onto *@home .6 I'm new to this so I probably am overlooking the obvious. Can I just install BRIstuff onto a fresh *@home install? The BRIstuff installer downloads another * from Digium. Will this interfere with the @home install and must I comment out the Asterisk install in the BRIstuff install.sh file? Any pointers are much appreciated.

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

Hi All, I'm using Asterisk 1.2.17 and I would like to install BRIstuff. Problem is that current version of BRIstuff is for Asterisk 1.2.14. BRIstuff 0.3.0-PRE-1y (* 1.2.14) If I'm misunderstanding how to apply patches for 1.2.17? Thank you in advance, Dominik

Hello, I am trying to install bristuff-0.3.0-PRE-1x.tar.gz on debian with kernel 2.6.19.2 and I've got some errors connected with XPP. I was wondering if somebody managed to install bristuff with this kernel or any kind of kernel 2.6.19. The bristuff mentioned above contains zaptel 1.2.10 not 1.2.12. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I am trying to install a Billion ISDN on Asterisk I have Debian Etch and I installed theese packages: apt-get install linux-headers-`uname -r` apt-get install make apt-get install ncurses-base ncurses-bin ncurses-term apt-get install libncurses5 libncurses5-dev apt-get install bison apt-get install openssl apt-get install libssl0.9.8 apt-get install libssl-dev apt-get install

Hi! I have a problem compiling the res_config_mysql.so after successfully compiling and installing asterisk with the bristuff package/patches. I get lots of compiler errors. When inserting a previously compiled res_config_mysql.so into the bristuff-patched Asterisk, I get an error on startup and Asterisk crashes. Anyone using res_config_mysql.so with the bristuff package and can help me? Thanks,

Hello, I tried to read Bristuff source code to understand the way calls are bridged from one BRI port to another (as HFC cards have "active channel switching capability"). Doing so I looked at zaphfc.c file which seems to be the only .c file constituting bristuff but I may be wrong I'm far from being an expert on this. I found 4 functions (hfc_btrans, hfc_brec, hfc_dtrans,

Hi, it helps to have configured and working kernel sources installed. Configure your kernel sources for the running kernel and then run "make" in the kernel source dir to build the necessary scripts. You dont have to wait until the kernel is compiled. best regards Klaus -- Klaus-Peter Junghanns Am Samstag, den 25.06.2005, 02:45 +0200 schrieb Stefan Gofferje: > Hi folks, > >

Hi, I have following problems compiling bristuff-0.2.0RC8m. Has anybody seen them before and can point me in the right direction? zaphfc/make all: ---------------------- /usr/src/asterisk/bristuff-0.2.0-RC8m/zaphfc/zaphfc.c: In function 'hfc_findCards': /usr/src/asterisk/bristuff-0.2.0-RC8m/zaphfc/zaphfc.c:1000: error: invalid lvalue in assignment make[2]: *** [